Chen Ye

Li Wang, Lihui Wang, Zixiang Kuai et al.

To promote the generalization ability of breast tumor segmentation models, as well as to improve the segmentation performance for breast tumors with smaller size, low-contrast and irregular shape, we propose a progressive dual priori network (PDPNet) to segment breast tumors from dynamic enhanced magnetic resonance images (DCE-MRI) acquired at different centers. The PDPNet first cropped tumor regions with a coarse-segmentation based localization module, then the breast tumor mask was progressively refined by using the weak semantic priori and cross-scale correlation prior knowledge. To validate the effectiveness of PDPNet, we compared it with several state-of-the-art methods on multi-center datasets. The results showed that, comparing against the suboptimal method, the DSC and HD95 of PDPNet were improved at least by 5.13% and 7.58% respectively on multi-center test sets. In addition, through ablations, we demonstrated that the proposed localization module can decrease the influence of normal tissues and therefore improve the generalization ability of the model. The weak semantic priors allow focusing on tumor regions to avoid missing small tumors and low-contrast tumors. The cross-scale correlation priors are beneficial for promoting the shape-aware ability for irregular tumors. Thus integrating them in a unified framework improved the multi-center breast tumor segmentation performance. The source code and open data can be accessed at https://github.com/wangli100209/PDPNet.

Gengxuan Tian, Junqiao Zhao, Yingfeng Cai et al.

LiDAR-based place recognition plays a crucial role in Simultaneous Localization and Mapping (SLAM) and LiDAR localization. Despite the emergence of various deep learning-based and hand-crafting-based methods, rotation-induced place recognition failure remains a critical challenge. Existing studies address this limitation through specific training strategies or network structures. However, the former does not produce satisfactory results, while the latter focuses mainly on the reduced problem of SO(2) rotation invariance. Methods targeting SO(3) rotation invariance suffer from limitations in discrimination capability. In this paper, we propose a new method that employs Vector Neurons Network (VNN) to achieve SO(3) rotation invariance. We first extract rotation-equivariant features from neighboring points and map low-dimensional features to a high-dimensional space through VNN. Afterwards, we calculate the Euclidean and Cosine distance in the rotation-equivariant feature space as rotation-invariant feature descriptors. Finally, we aggregate the features using GeM pooling to obtain global descriptors. To address the significant information loss when formulating rotation-invariant descriptors, we propose computing distances between features at different layers within the Euclidean space neighborhood. This greatly improves the discriminability of the point cloud descriptors while ensuring computational efficiency. Experimental results on public datasets show that our approach significantly outperforms other baseline methods implementing rotation invariance, while achieving comparable results with current state-of-the-art place recognition methods that do not consider rotation issues.

Chen Ye, Guan Gui, Li Xu et al.

In next-generation wireless communications systems, accurate sparse channel estimation (SCE) is required for coherent detection. This paper studies SCE in terms of adaptive filtering theory, which is often termed as adaptive channel estimation (ACE). Theoretically, estimation accuracy could be improved by either exploiting sparsity or adopting suitable error criterion. It motivates us to develop effective adaptive sparse channel estimation (ASCE) methods to improve estimation performance. In our previous research, two ASCE methods have been proposed by combining forth-order error criterion based normalized least mean fourth (NLMF) and L1-norm penalized functions, i.e., zero-attracting NLMF (ZA-NLMF) algorithm and reweighted ZA-NLMF (RZA-NLMF) algorithm. Motivated by compressive sensing theory, an improved ASCE method is proposed by using reweighted L1-norm NLMF (RL1-NLMF) algorithm where RL1 can exploit more sparsity information than ZA and RZA. Specifically, we construct the cost function of RL1-NLMF and hereafter derive its update equation. In addition, intuitive figure is also given to verify that RL1 is more efficient than conventional two sparsity constraints. Finally, simulation results are provided to confirm this study.

Hai Zhang, Hang Yu, Junqiao Zhao et al.

Designing and deriving effective model-based reinforcement learning (MBRL) algorithms with a performance improvement guarantee is challenging, mainly attributed to the high coupling between model learning and policy optimization. Many prior methods that rely on return discrepancy to guide model learning ignore the impacts of model shift, which can lead to performance deterioration due to excessive model updates. Other methods use performance difference bound to explicitly consider model shift. However, these methods rely on a fixed threshold to constrain model shift, resulting in a heavy dependence on the threshold and a lack of adaptability during the training process. In this paper, we theoretically derive an optimization objective that can unify model shift and model bias and then formulate a fine-tuning process. This process adaptively adjusts the model updates to get a performance improvement guarantee while avoiding model overfitting. Based on these, we develop a straightforward algorithm USB-PO (Unified model Shift and model Bias Policy Optimization). Empirical results show that USB-PO achieves state-of-the-art performance on several challenging benchmark tasks.

Zhe Yu, Wenpeng Xing, Chen Ye et al.

Retrieval-augmented LLMs are deployed for tasks where evidence quality determines action safety, yet evaluation protocols assume that single-turn robustness predicts robustness when evidence accumulates across turns. We show this assumption is fundamentally incorrect. Models exhibit a monitoring-control gap: they readily acknowledge contradictory evidence, yet this awareness fails to constrain their final recommendations - detecting epistemic conflict does not imply resolving it safely. Through a multi-turn document accumulation protocol across four model families (1.5B-32B parameters) and over 50,000 turn-level evaluations, we demonstrate that single-turn diagnostics systematically overestimate RAG safety, that contradiction acknowledgement is uncorrelated with safe resolution, a pattern corroborated by targeted human validation, and that no universal prompt fix exists. Converging mechanism evidence - hidden-state probing, attention analysis, and response-strategy taxonomy - points to action selection as the most plausible locus of the deficit: danger-relevant information is internally represented and receives enhanced attention during unsafe generation, yet fails to constrain output behavior. The gap between what models recognize and what they do must be measured and closed before retrieval-augmented systems can be trusted in high-stakes settings.

Zhe Yu, Wenpeng Xing, Yunzhao Wei et al.

Retrieval-augmented generation promises to ground language model outputs in external evidence, yet the field has no reliable way to verify whether retrieved context actually governs generation -- a prerequisite for any high-stakes deployment. The standard assumption, that context-consistent output implies context-governed output, breaks when the retrieved document overlaps with the model's pretraining data: the model can produce faithful-looking text entirely from parametric memory, and both pathways yield indistinguishable output. We name this failure the attribution blind spot and introduce Computational Reality Monitoring (CRM) to address it. CRM operationalizes a principle adapted from cognitive science's reality monitoring framework: comparing internal representations with and without context reveals membership-conditioned representational divergence that output-level monitors systematically miss. CRM does not certify which source an individual generation used; it detects whether pretraining exposure leaves a measurable internal trajectory signature, establishing a necessary substrate for source attribution. Across nine model variants spanning three families, this divergence concentrates in architecture-specific layer patterns, receives converging support from block-level noise intervention, and generalizes across tasks and datasets while collapsing on domain-confounded benchmarks. The attribution blind spot is measurable and partially addressable: internal representations carry a diagnostic signal invisible at the output level, establishing a foundation for systems whose internal awareness of evidence provenance governs their external behavior.

Xiao Zhang, Hai Zhang, Hongtu Zhou et al.

Safety is one of the main challenges in applying reinforcement learning to realistic environmental tasks. To ensure safety during and after training process, existing methods tend to adopt overly conservative policy to avoid unsafe situations. However, overly conservative policy severely hinders the exploration, and makes the algorithms substantially less rewarding. In this paper, we propose a method to construct a boundary that discriminates safe and unsafe states. The boundary we construct is equivalent to distinguishing dead-end states, indicating the maximum extent to which safe exploration is guaranteed, and thus has minimum limitation on exploration. Similar to Recovery Reinforcement Learning, we utilize a decoupled RL framework to learn two policies, (1) a task policy that only considers improving the task performance, and (2) a recovery policy that maximizes safety. The recovery policy and a corresponding safety critic are pretrained on an offline dataset, in which the safety critic evaluates upper bound of safety in each state as awareness of environmental safety for the agent. During online training, a behavior correction mechanism is adopted, ensuring the agent to interact with the environment using safe actions only. Finally, experiments of continuous control tasks demonstrate that our approach has better task performance with less safety violations than state-of-the-art algorithms.

Wenjie Mu, Zhan Li, Chuanzhou Su et al.

Generalizable Neural Radiance Fields (GeNeRFs) enable high-quality scene reconstruction from sparse views and can generalize to unseen scenes. However, in real-world settings, transient distractors break cross-view structural consistency, corrupting supervision and degrading reconstruction quality. Existing distractor-free NeRF methods rely on per-scene optimization and estimate uncertainty from per-view reconstruction errors, which are not reliable for GeNeRFs and often misjudge inconsistent static structures as distractors. To this end, we propose MU-GeNeRF, a Multi-view Uncertainty-guided distractor-aware GeNeRF framework designed to alleviate GeNeRF's robust modeling challenges in the presence of transient distractions. We decompose distractor awareness into two complementary uncertainty components: Source-view Uncertainty, which captures structural discrepancies across source views caused by viewpoint changes or dynamic factors; and Target-view Uncertainty, which detects observation anomalies in the target image induced by transient distractors.These two uncertainties address distinct error sources and are combined through a heteroscedastic reconstruction loss, which guides the model to adaptively modulate supervision, enabling more robust distractor suppression and geometric modeling.Extensive experiments show that our method not only surpasses existing GeNeRFs but also achieves performance comparable to scene-specific distractor-free NeRFs.

Di Zhang, Bowen Lv, Hai Zhang et al.

A primary challenge for visual-based Reinforcement Learning (RL) is to generalize effectively across unseen environments. Although previous studies have explored different auxiliary tasks to enhance generalization, few adopt image reconstruction due to concerns about exacerbating overfitting to task-irrelevant features during training. Perceiving the pre-eminence of image reconstruction in representation learning, we propose SMG (Separated Models for Generalization), a novel approach that exploits image reconstruction for generalization. SMG introduces two model branches to extract task-relevant and task-irrelevant representations separately from visual observations via cooperatively reconstruction. Built upon this architecture, we further emphasize the importance of task-relevant features for generalization. Specifically, SMG incorporates two additional consistency losses to guide the agent's focus toward task-relevant areas across different scenarios, thereby achieving free from overfitting. Extensive experiments in DMC demonstrate the SOTA performance of SMG in generalization, particularly excelling in video-background settings. Evaluations on robotic manipulation tasks further confirm the robustness of SMG in real-world applications.

Siyu Lu, Yanhan Liu, Shiyu Xu et al.

Graphics (e.g., figures and charts) are ubiquitous in scientific papers, yet separating graphics from text increases cognitive load in understanding text-graphic connections. Research has found that word-scale graphics, or visual embellishments at typographic size, can augment original text, making it more expressive and easier to understand. However, whether, if so, how scientific papers adopt word-scale graphics for scholarly communication remains unclear. To address this gap, we conducted a corpus study reviewing 909 word-scale graphics extracted from 126,797 scientific papers. Through analysis, we propose a framework that characterizes where (positioning), why (communicative function), and how (visual representation) authors apply word-scale graphics in scientific papers. Our findings reveal that word-scale graphics are rarely used, that icons dominate visual representation, and that visual representation connects with communicative function (e.g., using quantitative graphs for data annotation). We further discuss opportunities to enhance scholarly communication with word-scale graphics through technical and administrative innovations.

Xiaolong Yu, Junqiao Zhao, Shuangfu Song et al.

Using Quadrics as the object representation has the benefits of both generality and closed-form projection derivation between image and world spaces. Although numerous constraints have been proposed for dual quadric reconstruction, we found that many of them are imprecise and provide minimal improvements to localization.After scrutinizing the existing constraints, we introduce a concise yet more precise convex hull-based algebraic constraint for object landmarks, which is applied to object reconstruction, frontend pose estimation, and backend bundle adjustment.This constraint is designed to fully leverage precise semantic segmentation, effectively mitigating mismatches between complex-shaped object contours and dual quadrics.Experiments on public datasets demonstrate that our approach is applicable to both monocular and RGB-D SLAM and achieves improved object mapping and localization than existing quadric SLAM methods. The implementation of our method is available at https://github.com/tiev-tongji/convexhull-based-algebraic-constraint.

Junqiao Zhao, Fenglin Zhang, Yingfeng Cai et al.

Visual Place Recognition (VPR) aims to retrieve frames from a geotagged database that are located at the same place as the query frame. To improve the robustness of VPR in perceptually aliasing scenarios, sequence-based VPR methods are proposed. These methods are either based on matching between frame sequences or extracting sequence descriptors for direct retrieval. However, the former is usually based on the assumption of constant velocity, which is difficult to hold in practice, and is computationally expensive and subject to sequence length. Although the latter overcomes these problems, existing sequence descriptors are constructed by aggregating features of multiple frames only, without interaction on temporal information, and thus cannot obtain descriptors with spatio-temporal discrimination.In this paper, we propose a sequence descriptor that effectively incorporates spatio-temporal information. Specifically, spatial attention within the same frame is utilized to learn spatial feature patterns, while attention in corresponding local regions of different frames is utilized to learn the persistence or change of features over time. We use a sliding window to control the temporal range of attention and use relative positional encoding to construct sequential relationships between different features. This allows our descriptors to capture the intrinsic dynamics in a sequence of frames.Comprehensive experiments on challenging benchmark datasets show that the proposed approach outperforms recent state-of-the-art methods.The code is available at https://github.com/tiev-tongji/Spatio-Temporal-SeqVPR.

Jianfeng Li, Junqiao Zhao, Tiantian Feng et al.

In this paper, we proposed an unsupervised learning method for estimating the optical flow between video frames, especially to solve the occlusion problem. Occlusion is caused by the movement of an object or the movement of the camera, defined as when certain pixels are visible in one video frame but not in adjacent frames. Due to the lack of pixel correspondence between frames in the occluded area, incorrect photometric loss calculation can mislead the optical flow training process. In the video sequence, we found that the occlusion in the forward ($t\rightarrow t+1$) and backward ($t\rightarrow t-1$) frame pairs are usually complementary. That is, pixels that are occluded in subsequent frames are often not occluded in the previous frame and vice versa. Therefore, by using this complementarity, a new weighted loss is proposed to solve the occlusion problem. In addition, we calculate gradients in multiple directions to provide richer supervision information. Our method achieves competitive optical flow accuracy compared to the baseline and some supervised methods on KITTI 2012 and 2015 benchmarks. This source code has been released at https://github.com/jianfenglihg/UnOpticalFlow.git.

Qian Chen, Junqiao Zhao, Hongtu Zhou et al.

Long-horizon, sparse-reward tasks pose a fundamental challenge for reinforcement learning, since single-step TD learning suffers from bootstrapping error accumulation across successive Bellman updates. Actor-critic methods with action chunking address this by operating over temporally extended actions, which reduce the effective horizon, enable fast value backups, and support temporally consistent exploration. However, existing methods rely on a fixed chunk size and therefore cannot adaptively balance reactivity against temporal consistency. A large fixed chunk size reduces responsiveness to new observations, while a small one produces incoherent motions, forcing task-specific tuning of the chunk size. To address this limitation, we propose Adaptive Chunk Size Actor-Critic (ACSAC). ACSAC leverages a causal Transformer critic to evaluate expected returns for action chunks of different sizes. At each chunk boundary, it adaptively selects the chunk size that maximizes the expected return, supporting flexible, state-dependent chunk sizes without task-specific tuning. We prove that the ACSAC Bellman operator is a contraction whose unique fixed point is the action-value function of the adaptive policy. Experiments on OGBench demonstrate that ACSAC achieves state-of-the-art performance on long-horizon, sparse-reward manipulation tasks across both offline RL and offline-to-online RL settings.

Qingjun Wang, Hongtu Zhou, Hang Yu et al.

Offline reinforcement learning (RL) faces a critical challenge of overestimating the value of out-of-distribution (OOD) actions. Existing methods mitigate this issue by penalizing unseen samples, yet they fail to accurately identify OOD actions and may suppress beneficial exploration beyond the behavioral support. Although several methods have been proposed to differentiate OOD samples with distinct properties, they typically rely on restrictive assumptions about the data distribution and remain limited in discrimination ability. To address this problem, we propose DOSER (Diffusion-based OOD Detection and Selective Regularization), a novel framework that goes beyond uniform penalization. DOSER trains two diffusion models to capture the behavior policy and state distribution, using single-step denoising reconstruction error as a reliable OOD indicator. During policy optimization, it further distinguishes between beneficial and detrimental OOD actions by evaluating predicted transitions, selectively suppressing risky actions while encouraging exploration of high-potential ones. Theoretically, we prove that DOSER is a $γ$-contraction and therefore admits a unique fixed point with bounded value estimates. We further provide an asymptotic performance guarantee relative to the optimal policy under model approximation and OOD detection errors. Across extensive offline RL benchmarks, DOSER consistently attains superior performance to prior methods, especially on suboptimal datasets.

Xinyue Zhang, Haolong Li, Jiawei Ma et al.

Vectorized glyphs are widely used in poster design, network animation, art display, and various other fields due to their scalability and flexibility. In typography, they are often seen as special sequences composed of ordered strokes. This concept extends to the token sequence prediction abilities of large language models (LLMs), enabling vectorized character generation through stroke modeling. In this paper, we propose a novel Large Vectorized Glyph Model (LVGM) designed to generate vectorized Chinese glyphs by predicting the next stroke. Initially, we encode strokes into discrete latent variables called stroke embeddings. Subsequently, we train our LVGM via fine-tuning DeepSeek LLM by predicting the next stroke embedding. With limited strokes given, it can generate complete characters, semantically elegant words, and even unseen verses in vectorized form. Moreover, we release a new large-scale Chinese SVG dataset containing 907,267 samples based on strokes for dynamically vectorized glyph generation. Experimental results show that our model has scaling behaviors on data scales. Our generated vectorized glyphs have been validated by experts and relevant individuals.

Wenxuan Li, Xinze Zhou, Qi Chen et al.

PanTS is a large-scale, multi-institutional dataset curated to advance research in pancreatic CT analysis. It contains 36,390 CT scans from 145 medical centers, with expert-validated, voxel-wise annotations of over 993,000 anatomical structures, covering pancreatic tumors, pancreas head, body, and tail, and 24 surrounding anatomical structures such as vascular/skeletal structures and abdominal/thoracic organs. Each scan includes metadata such as patient age, sex, diagnosis, contrast phase, in-plane spacing, slice thickness, etc. AI models trained on PanTS achieve significantly better performance in pancreatic tumor detection, localization, and segmentation compared to those trained on existing public datasets. Our analysis indicates that these gains are directly attributable to the 16x larger-scale tumor annotations and indirectly supported by the 24 additional surrounding anatomical structures. As the largest and most comprehensive resource of its kind, PanTS offers a new benchmark for developing and evaluating AI models in pancreatic CT analysis.

Fufangchen Zhao, Liao Zhang, Daiqi Shi et al.

We propose VideoPerceiver, a novel video multimodal large language model (VMLLM) that enhances fine-grained perception in video understanding, addressing VMLLMs' limited ability to reason about brief actions in short clips or rare transient events in long videos. VideoPerceiver adopts a two-stage training framework. During supervised fine-tuning (SFT), we construct "key-information-missing" videos by extracting event-action keywords from captions, identifying corresponding key frames, and replacing them with adjacent frames. We jointly encode original and modified video tokens with text tokens, aligning intermediate visual representations with keywords via an auxiliary contrastive loss to enhance sensitivity to fine-grained motion cues. In reinforcement learning (RL), both video variants are fed into the model to generate descriptions, and a novel relative reward ensures responses from complete videos outperform those from degraded inputs, explicitly training the model to recover temporally precise action details. We also curate a dataset of 80,000 videos with fine-grained actions and transient events. Experiments show VideoPerceiver substantially outperforms state-of-the-art VMLLMs on fine-grained action understanding and rare event captioning benchmarks, while maintaining strong performance on standard tasks. By prioritizing task-relevant visual features, our work redefines video-language model training for fine-grained perception.

Haolong Li, Yu Ma, Yinqi Zhang et al.

Large Language Models (LLMs) have shown excellent performance in language understanding, text generation, code synthesis, and many other tasks, while they still struggle in complex multi-step reasoning problems, such as mathematical reasoning. In this paper, through a newly proposed arithmetical puzzle problem, we show that the model can perform well on multi-step reasoning tasks via fine-tuning on high-quality synthetic data. Experimental results with the open-llama-3B model on three different test datasets show that not only the model can reach a zero-shot pass@1 at 0.44 on the in-domain dataset, it also demonstrates certain generalization capabilities on the out-of-domain datasets. Specifically, this paper has designed two out-of-domain datasets in the form of extending the numerical range and the composing components of the arithmetical puzzle problem separately. The fine-tuned models have shown encouraging performance on these two far more difficult tasks with the zero-shot pass@1 at 0.33 and 0.35, respectively.

Chang Huang, Shatong Zhu, Junqiao Zhao et al.

Value function factorization methods are commonly used in cooperative multi-agent reinforcement learning, with QMIX receiving significant attention. Many QMIX-based methods introduce monotonicity constraints between the joint action value and individual action values to achieve decentralized execution. However, such constraints limit the representation capacity of value factorization, restricting the joint action values it can represent and hindering the learning of the optimal policy. To address this challenge, we propose the Potentially Optimal Joint Actions Weighted QMIX (POWQMIX) algorithm, which recognizes the potentially optimal joint actions and assigns higher weights to the corresponding losses of these joint actions during training. We theoretically prove that with such a weighted training approach the optimal policy is guaranteed to be recovered. Experiments in matrix games, difficulty-enhanced predator-prey, and StarCraft II Multi-Agent Challenge environments demonstrate that our algorithm outperforms the state-of-the-art value-based multi-agent reinforcement learning methods.

Xuebo Tian, Junqiao Zhao, Chen Ye

Ego-pose estimation and dynamic object tracking are two key issues in an autonomous driving system. Two assumptions are often made for them, i.e. the static world assumption of simultaneous localization and mapping (SLAM) and the exact ego-pose assumption of object tracking, respectively. However, these assumptions are difficult to hold in highly dynamic road scenarios where SLAM and object tracking become correlated and mutually beneficial. In this paper, DL-SLOT, a dynamic Lidar SLAM and object tracking method is proposed. This method integrates the state estimations of both the ego vehicle and the static and dynamic objects in the environment into a unified optimization framework, to realize SLAM and object tracking (SLOT) simultaneously. Firstly, we implement object detection to remove all the points that belong to potential dynamic objects. Then, LiDAR odometry is conducted using the filtered point cloud. At the same time, detected objects are associated with the history object trajectories based on the time-series information in a sliding window. The states of the static and dynamic objects and ego vehicle in the sliding window are integrated into a unified local optimization framework. We perform SLAM and object tracking simultaneously in this framework, which significantly improves the robustness and accuracy of SLAM in highly dynamic road scenarios and the accuracy of objects' states estimation. Experiments on public datasets have shown that our method achieves better accuracy than A-LOAM.

Yingfeng Cai, Junqiao Zhao, Jiafeng Cui et al.

Visual Place Recognition (VPR) in areas with similar scenes such as urban or indoor scenarios is a major challenge. Existing VPR methods using global descriptors have difficulty capturing local specific regions (LSR) in the scene and are therefore prone to localization confusion in such scenarios. As a result, finding the LSR that are critical for location recognition becomes key. To address this challenge, we introduced Patch-NetVLAD+, which was inspired by patch-based VPR researches. Our method proposed a fine-tuning strategy with triplet loss to make NetVLAD suitable for extracting patch-level descriptors. Moreover, unlike existing methods that treat all patches in an image equally, our method extracts patches of LSR, which present less frequently throughout the dataset, and makes them play an important role in VPR by assigning proper weights to them. Experiments on Pittsburgh30k and Tokyo247 datasets show that our approach achieved up to 6.35\% performance improvement than existing patch-based methods.

Shuangfu Song, Junqiao Zhao, Tiantian Feng et al.

The scale ambiguity problem is inherently unsolvable to monocular SLAM without the metric baseline between moving cameras. In this paper, we present a novel scale estimation approach based on an object-level SLAM system. To obtain the absolute scale of the reconstructed map, we derive a nonlinear optimization method to make the scaled dimensions of objects conforming to the distribution of their sizes in the physical world, without relying on any prior information of gravity direction. We adopt the dual quadric to represent objects for its ability to fit objects compactly and accurately. In the proposed monocular object-level SLAM system, dual quadrics are fastly initialized based on constraints of 2-D detections and fitted oriented bounding box and are further optimized to provide reliable dimensions for scale estimation.

Pengxu Wei, Hannan Lu, Radu Timofte et al.

This paper introduces the real image Super-Resolution (SR) challenge that was part of the Advances in Image Manipulation (AIM) workshop, held in conjunction with ECCV 2020. This challenge involves three tracks to super-resolve an input image for $\times$2, $\times$3 and $\times$4 scaling factors, respectively. The goal is to attract more attention to realistic image degradation for the SR task, which is much more complicated and challenging, and contributes to real-world image super-resolution applications. 452 participants were registered for three tracks in total, and 24 teams submitted their results. They gauge the state-of-the-art approaches for real image SR in terms of PSNR and SSIM.

Hongtu Zhou, Xinneng Yang, Enwei Zhang et al.

Real-time multi-target path planning is a key issue in the field of autonomous driving. Although multiple paths can be generated in real-time with polynomial curves, the generated paths are not flexible enough to deal with complex road scenes such as S-shaped road and unstructured scenes such as parking lots. Search and sampling-based methods, such as A* and RRT and their derived methods, are flexible in generating paths for these complex road environments. However, the existing algorithms require significant time to plan to multiple targets, which greatly limits their application in autonomous driving. In this paper, a real-time path planning method for multi-targets is proposed. We train a fully convolutional neural network (FCN) to predict a path region for the target at first. By taking the predicted path region as soft constraints, the A* algorithm is then applied to search the exact path to the target. Experiments show that FCN can make multiple predictions in a very short time (50 times in 40ms), and the predicted path region effectively restrict the searching space for the following A* search. Therefore, the A* can search much faster so that the multi-target path planning can be achieved in real-time (3 targets in less than 100ms).

Lu Sun, Junqiao Zhao, Xudong He et al.

For autonomous vehicles, high-precision real-time localization is the guarantee of stable driving. Compared with the visual odometry (VO), the LiDAR odometry (LO) has the advantages of higher accuracy and better stability. However, 2D LO is only suitable for the indoor environment, and 3D LO has less efficiency in general. Both are not suitable for the online localization of an autonomous vehicle in an outdoor driving environment. In this paper, a direct LO method based on the 2.5D grid map is proposed. The fast semi-dense direct method proposed for VO is employed to register two 2.5D maps. Experiments show that this method is superior to both the 3D-NDT and LOAM in the outdoor environment.

Xudong He, Junqiao Zhao, Lu Sun et al.

In this paper, we studied a SLAM method for vector-based road structure mapping using multi-beam LiDAR. We propose to use the polyline as the primary mapping element instead of grid cell or point cloud, because the vector-based representation is precise and lightweight, and it can directly generate vector-based High-Definition (HD) driving map as demanded by autonomous driving systems. We explored: 1) the extraction and vectorization of road structures based on local probabilistic fusion. 2) the efficient vector-based matching between frames of road structures. 3) the loop closure and optimization based on the pose-graph. In this study, we took a specific road structure, the road boundary, as an example. We applied the proposed matching method in three different scenes and achieved the average absolute matching error of 0.07. We further applied the mapping system to the urban road with the length of 860 meters and achieved an average global accuracy of 0.466 m without the help of high precision GPS.

Junqiao Zhao, Chen Ye, Yan Wu et al.

TiEV is an autonomous driving platform implemented by Tongji University of China. The vehicle is drive-by-wire and is fully powered by electricity. We devised the software system of TiEV from scratch, which is capable of driving the vehicle autonomously in urban paths as well as on fast express roads. We describe our whole system, especially novel modules of probabilistic perception fusion, incremental mapping, the 1st and the 2nd planning and the overall safety concern. TiEV finished 2016 and 2017 Intelligent Vehicle Future Challenge of China held at Changshu. We show our experiences on the development of autonomous vehicles and future trends.