Kyriakos Stylianopoulos

George C. Alexandropoulos, Kyriakos Stylianopoulos, Chongwen Huang et al.

The emerging technology of Reconfigurable Intelligent Surfaces (RISs) is provisioned as an enabler of smart wireless environments, offering a highly scalable, low-cost, hardware-efficient, and almost energy-neutral solution for dynamic control of the propagation of electromagnetic signals over the wireless medium, ultimately providing increased environmental intelligence for diverse operation objectives. One of the major challenges with the envisioned dense deployment of RISs in such reconfigurable radio environments is the efficient configuration of multiple metasurfaces with limited, or even the absence of, computing hardware. In this paper, we consider multi-user and multi-RIS-empowered wireless systems, and present a thorough survey of the online machine learning approaches for the orchestration of their various tunable components. Focusing on the sum-rate maximization as a representative design objective, we present a comprehensive problem formulation based on Deep Reinforcement Learning (DRL). We detail the correspondences among the parameters of the wireless system and the DRL terminology, and devise generic algorithmic steps for the artificial neural network training and deployment, while discussing their implementation details. Further practical considerations for multi-RIS-empowered wireless communications in the sixth Generation (6G) era are presented along with some key open research challenges. Differently from the DRL-based status quo, we leverage the independence between the configuration of the system design parameters and the future states of the wireless environment, and present efficient multi-armed bandits approaches, whose resulting sum-rate performances are numerically shown to outperform random configurations, while being sufficiently close to the conventional Deep Q-Network (DQN) algorithm, but with lower implementation complexity.

Kyriakos Stylianopoulos, Murat Bayraktar, Nuria González Prelcic et al.

User localization and tracking in the upcoming generation of wireless networks have the potential to be revolutionized by technologies such as the Dynamic Metasurface Antennas (DMAs). Commonly proposed algorithmic approaches rely on assumptions about relatively dominant Line-of-Sight (LoS) paths, or require pilot transmission sequences whose length is comparable to the number of DMA elements, thus, leading to limited effectiveness and considerable measurement overheads in blocked LoS and dynamic multipath environments. In this paper, we present a two-stage machine-learning-based approach for user tracking, specifically designed for non-LoS multipath settings. A newly proposed attention-based Neural Network (NN) is first trained to map noisy channel responses to potential user positions, regardless of user mobility patterns. This architecture constitutes a modification of the prominent vision transformer, specifically modified for extracting information from high-dimensional frequency response signals. As a second stage, the NN's predictions for the past user positions are passed through a learnable autoregressive model to exploit the time-correlated channel information and obtain the final position predictions. The channel estimation procedure leverages a DMA receive architecture with partially-connected radio frequency chains, which results to reduced numbers of pilots. The numerical evaluation over an outdoor ray-tracing scenario illustrates that despite LoS blockage, this methodology is capable of achieving high position accuracy across various multipath settings.

Kyriakos Stylianopoulos, Paolo Di Lorenzo, George C. Alexandropoulos

Goal-oriented communications offer an attractive alternative to the Shannon-based communication paradigm, where the data is never reconstructed at the Receiver (RX) side. Rather, focusing on the case of edge inference, the Transmitter (TX) and the RX cooperate to exchange features of the input data that will be used to predict an unseen attribute of them, leveraging information from collected data sets. This chapter demonstrates that the wireless channel can be used to perform computations over the data, when equipped with programmable metasurfaces. The end-to-end system of the TX, RX, and MS-based channel is treated as a single deep neural network which is trained through backpropagation to perform inference on unseen data. Using Stacked Intelligent Metasurfaces (SIM), it is shown that this Metasurfaces-Integrated Neural Network (MINN) can achieve performance comparable to fully digital neural networks under various system parameters and data sets. By offloading computations onto the channel itself, important benefits may be achieved in terms of energy consumption, arising from reduced computations at the transceivers and smaller transmission power required for successful inference.

Kyriakos Stylianopoulos, Mario Edoardo Pandolfo, Paolo Di Lorenzo et al.

The upcoming sixth Generation (6G) of wireless networks envisions ultra-low latency and energy efficient Edge Inference (EI) for diverse Internet of Things (IoT) applications. However, traditional digital hardware for machine learning is power intensive, motivating the need for alternative computation paradigms. Over-The-Air (OTA) computation is regarded as an emerging transformative approach assigning the wireless channel to actively perform computational tasks. This article introduces the concept of Metasurfaces-Integrated Neural Networks (MINNs), a physical-layer-enabled deep learning framework that leverages programmable multi-layer metasurface structures and Multiple-Input Multiple-Output (MIMO) channels to realize computational layers in the wave propagation domain. The MINN system is conceptualized as three modules: Encoder, Channel (uncontrollable propagation features and metasurfaces), and Decoder. The first and last modules, realized respectively at the multi-antenna transmitter and receiver, consist of conventional digital or purposely designed analog Deep Neural Network (DNN) layers, and the metasurfaces responses of the Channel module are optimized alongside all modules as trainable weights. This architecture enables computation offloading into the end-to-end physical layer, flexibly among its constituent modules, achieving performance comparable to fully digital DNNs while significantly reducing power consumption. The training of the MINN framework, two representative variations, and performance results for indicative applications are presented, highlighting the potential of MINNs as a lightweight and sustainable solution for future EI-enabled wireless systems. The article is concluded with a list of open challenges and promising research directions.

Kyriakos Stylianopoulos, Paolo Di Lorenzo, George C. Alexandropoulos

In the Edge Inference (EI) paradigm, where a Deep Neural Network (DNN) is split across the transceivers to wirelessly communicate goal-defined features in solving a computational task, the wireless medium has been commonly treated as a source of noise. In this paper, motivated by the emerging technologies of Reconfigurable Intelligent Surfaces (RISs) and Stacked Intelligent Metasurfaces (SIM) that offer programmable propagation of wireless signals, either through controllable reflections or diffractions, we optimize the RIS/SIM-enabled smart wireless environment as a means of over-the-air computing, resembling the operations of DNN layers. We propose a framework of Metasurfaces-Integrated Neural Networks (MINNs) for EI, presenting its modeling, training through a backpropagation variation for fading channels, and deployment aspects. The overall end-to-end DNN architecture is general enough to admit RIS and SIM devices, through controllable reconfiguration before each transmission or fixed configurations after training, while both channel-aware and channel-agnostic transceivers are considered. Our numerical evaluation showcases metasurfaces to be instrumental in performing image classification under link budgets that impede conventional communications or metasurface-free systems. It is demonstrated that our MINN framework can significantly simplify EI requirements, achieving near-optimal performance with $50~$dB lower testing signal-to-noise ratio compared to training, even without transceiver channel knowledge.

Kyriakos Stylianopoulos, Panagiotis Gavriilidis, Gabriele Gradoni et al.

Radio-Frequency (RF) imaging concerns the digital recreation of the surfaces of scene objects based on the scattered field at distributed receivers. To solve this difficult inverse scattering problems, data-driven methods are often employed that extract patterns from similar training examples, while offering minimal latency. In this paper, we first provide an approximate yet fast electromagnetic model, which is based on the electric field integral equations, for data generation, and subsequently propose a Deep Neural Network (DNN) architecture to learn the corresponding inverse model. A graph-attention backbone allows for the system geometry to be passed to the DNN, where residual convolutional layers extract features about the objects, while a UNet head performs the final image reconstruction. Our quantitative and qualitative evaluations on two synthetic data sets of different characteristics showcase the performance gains of thee proposed advanced architecture and its relative resilience to signal noise levels and various reception configurations.

Kyriakos Stylianopoulos, Mattia Fabiani, Giulia Torcolacci et al.

The recently envisioned goal-oriented communications paradigm calls for the application of inference on wirelessly transferred data via Machine Learning (ML) tools. An emerging research direction deals with the realization of inference ML models directly in the physical layer of Multiple-Input Multiple-Output (MIMO) systems, which, however, entails certain significant challenges. In this paper, leveraging the technology of programmable MetaSurfaces (MSs), we present an eXtremely Large (XL) MIMO system that acts as an Extreme Learning Machine (ELM) performing binary classification tasks completely Over-The-Air (OTA), which can be trained in closed form. The proposed system comprises a receiver architecture consisting of densely parallel placed diffractive layers of XL MSs followed by a single reception radio-frequency chain. The front layer facing the MIMO channel consists of identical unit cells of a fixed NonLinear (NL) response, while the remaining layers of elements of tunable linear responses are utilized to approximate OTA the trained ELM weights. Our numerical investigations showcase that, in the XL regime of MS elements, the proposed XL-MIMO-ELM system achieves performance comparable to that of digital and idealized ML models across diverse datasets and wireless scenarios, thereby demonstrating the feasibility of embedding OTA learning capabilities into future communication systems.

Kyriakos Stylianopoulos, George C. Alexandropoulos

In this paper, we show that an eXtremely Large (XL) Multiple-Input Multiple-Output (MIMO) wireless system with appropriate analog combining components exhibits the properties of a universal function approximator, similar to a feedforward neural network. By treating the channel coefficients as the random nodes of a hidden layer and the receiver's analog combiner as a trainable output layer, we cast the XL MIMO system to the Extreme Learning Machine (ELM) framework, leading to a novel formulation for Over-The-Air (OTA) edge inference without requiring traditional digital processing nor pre-processing at the transmitter. Through theoretical analysis and numerical evaluation, we showcase that XL-MIMO-ELM enables near-instantaneous training and efficient classification, even in varying fading conditions, suggesting the paradigm shift of beyond massive MIMO systems as OTA artificial neural networks alongside their profound communications role. Compared to deep learning approaches and conventional ELMs, the proposed framework achieves on par performance with orders of magnitude lower complexity, making it highly attractive for inference tasks with ultra low power wireless devices.

Mario Edoardo Pandolfo, Kyriakos Stylianopoulos, George C. Alexandropoulos et al.

Semantic communication systems aim to transmit task-relevant information between devices capable of artificial intelligence, but their performance can degrade when heterogeneous transmitter-receiver models produce misaligned latent representations. Existing semantic alignment methods typically rely on additional digital processing at the transmitter or receiver, increasing overall device complexity. In this work, we introduce the first over-the-air semantic alignment framework based on stacked intelligent metasurfaces (SIM), which enables latent-space alignment directly in the wave domain, reducing substantially the computational burden at the device level. We model SIMs as trainable linear operators capable of emulating both supervised linear aligners and zero-shot Parseval-frame-based equalizers. To realize these operators physically, we develop a gradient-based optimization procedure that tailors the metasurface transfer function to a desired semantic mapping. Experiments with heterogeneous vision transformer (ViT) encoders show that SIMs can accurately reproduce both supervised and zero-shot semantic equalizers, achieving up to 90% task accuracy in regimes with high signal-to-noise ratio (SNR), while maintaining strong robustness even at low SNR values.

Kyriakos Stylianopoulos, George C. Alexandropoulos

This paper introduces a novel framework for Edge Inference (EI) that bypasses the conventional practice of treating the wireless channel as noise. We utilize Stacked Intelligent Metasurfaces (SIMs) to control wireless propagation, enabling the channel itself to perform over-the-air computation. This eliminates the need for symbol estimation at the receiver, significantly reducing computational and communication overhead. Our approach models the transmitter-channel-receiver system as an end-to-end Deep Neural Network (DNN) where the response of the SIM elements are trainable parameters. To address channel variability, we incorporate a dedicated DNN module responsible for dynamically adjusting transmission power leveraging user location information. Our performance evaluations showcase that the proposed metasurfaces-integrated DNN framework with deep SIM architectures are capable of balancing classification accuracy and power consumption under diverse scenarios, offering significant energy efficiency improvements.

Fabio Saggese, Victor Croisfelt, Radosław Kotaba et al.

The research on Reconfigurable Intelligent Surfaces (RISs) has dominantly been focused on physical-layer aspects and analyses of the achievable adaptation of the wireless propagation environment. Compared to that, questions related to system-level integration of RISs have received less attention. We address this research gap by analyzing the necessary control/signaling operations that are necessary to integrate RIS as a new type of wireless infrastructure element. We build a general model for evaluating the impact of control operations along two dimensions: i) the allocated bandwidth of the control channels (in-band and out-of-band), and ii) the rate selection for the data channel (multiplexing or diversity). Specifically, the second dimension results in two generic transmission schemes, one based on channel estimation and the subsequent optimization of the RIS, while the other is based on sweeping through predefined RIS phase configurations. We analyze the communication performance in multiple setups built along these two dimensions. While necessarily simplified, our analysis reveals the basic trade-offs in RIS-assisted communication and the associated control operations. The main contribution of the paper is a methodology for systematic evaluation of the control overhead in RIS-aided networks, regardless of the specific control schemes used.

Kyriakos Stylianopoulos, Mattia Merluzzi, Paolo Di Lorenzo et al.

In this paper, we propose a novel algorithm for energy-efficient, low-latency, accurate inference at the wireless edge, in the context of 6G networks endowed with reconfigurable intelligent surfaces (RISs). We consider a scenario where new data are continuously generated/collected by a set of devices and are handled through a dynamic queueing system. Building on the marriage between Lyapunov stochastic optimization and deep reinforcement learning (DRL), we devise a dynamic learning algorithm that jointly optimizes the data compression scheme, the allocation of radio resources (i.e., power, transmission precoding), the computation resources (i.e., CPU cycles), and the RIS reflectivity parameters (i.e., phase shifts), with the aim of performing energy-efficient edge classification with end-to-end (E2E) delay and inference accuracy constraints. The proposed strategy enables dynamic control of the system and of the wireless propagation environment, performing a low-complexity optimization on a per-slot basis while dealing with time-varying radio channels and task arrivals, whose statistics are unknown. Numerical results assess the performance of the proposed RIS-empowered edge inference strategy in terms of trade-off between energy, delay, and accuracy of a classification task.