Zhunga Liu

Haochen Chai, Meimei Su, Yang Lyu et al.

Fixed-wing Unmanned Aerial Vehicles (UAVs) are one of the most commonly used platforms for the burgeoning Low-altitude Economy (LAE) and Urban Air Mobility (UAM), due to their long endurance and high-speed capabilities. Classical obstacle avoidance systems, which rely on prior maps or sophisticated sensors, face limitations in unknown low-altitude environments and small UAV platforms. In response, this paper proposes a lightweight deep reinforcement learning (DRL) based UAV collision avoidance system that enables a fixed-wing UAV to avoid unknown obstacles at cruise speed over 30m/s, with only onboard visual sensors. The proposed system employs a single-frame image depth inference module with a streamlined network architecture to ensure real-time obstacle detection, optimized for edge computing devices. After that, a reinforcement learning controller with a novel reward function is designed to balance the target approach and flight trajectory smoothness, satisfying the specific dynamic constraints and stability requirements of a fixed-wing UAV platform. An adaptive entropy adjustment mechanism is introduced to mitigate the exploration-exploitation trade-off inherent in DRL, improving training convergence and obstacle avoidance success rates. Extensive software-in-the-loop and hardware-in-the-loop experiments demonstrate that the proposed framework outperforms other methods in obstacle avoidance efficiency and flight trajectory smoothness and confirm the feasibility of implementing the algorithm on edge devices. The source code is publicly available at \url{https://github.com/ch9397/FixedWing-MonoPPO}.

Yimin Fu, Songbo Wang, Feiyan Wu et al.

The accurate target-background separation in infrared small target detection (IRSTD) highly depends on the discriminability of extracted representations. However, most existing methods are confined to domain-consistent settings, while overlooking whether such discriminability can generalize to unseen domains. In practice, distribution shifts between training and testing data are inevitable due to variations in observational conditions and environmental factors. Meanwhile, the intrinsic indistinctiveness of infrared small targets aggravates overfitting to domain-specific patterns. Consequently, the detection performance of models trained on source domains can be severely degraded when deployed in unseen domains. To address this challenge, we propose a spatial-spectral collaborative perception network (S$^2$CPNet) for cross-domain IRSTD. Moving beyond conventional spatial learning pipelines, we rethink IRSTD representations from a frequency perspective and reveal inconsistencies in spectral phase as the primary manifestation of domain discrepancies. Based on this insight, we develop a phase rectification module (PRM) to derive generalizable target awareness. Then, we employ an orthogonal attention mechanism (OAM) in skip connections to preserve positional information while refining informative representations. Moreover, the bias toward domain-specific patterns is further mitigated through selective style recomposition (SSR). Extensive experiments have been conducted on three IRSTD datasets, and the proposed method consistently achieves state-of-the-art performance under diverse cross-domain settings.

Wenyi Tan, Yang Li, Chenxing Zhao et al.

Object detection is a fundamental task in various applications ranging from autonomous driving to intelligent security systems. However, recognition of a person can be hindered when their clothing is decorated with carefully designed graffiti patterns, leading to the failure of object detection. To achieve greater attack potential against unknown black-box models, adversarial patches capable of affecting the outputs of multiple-object detection models are required. While ensemble models have proven effective, current research in the field of object detection typically focuses on the simple fusion of the outputs of all models, with limited attention being given to developing general adversarial patches that can function effectively in the physical world. In this paper, we introduce the concept of energy and treat the adversarial patches generation process as an optimization of the adversarial patches to minimize the total energy of the ``person'' category. Additionally, by adopting adversarial training, we construct a dynamically optimized ensemble model. During training, the weight parameters of the attacked target models are adjusted to find the balance point at which the generated adversarial patches can effectively attack all target models. We carried out six sets of comparative experiments and tested our algorithm on five mainstream object detection models. The adversarial patches generated by our algorithm can reduce the recognition accuracy of YOLOv2 and YOLOv3 to 13.19\% and 29.20\%, respectively. In addition, we conducted experiments to test the effectiveness of T-shirts covered with our adversarial patches in the physical world and could achieve that people are not recognized by the object detection model. Finally, leveraging the Grad-CAM tool, we explored the attack mechanism of adversarial patches from an energetic perspective.

Yang Li, Chenyu Wang, Tingrui Wang et al.

Black-box adversarial attacks remain challenging due to limited access to model internals. Existing methods often depend on specific network architectures or require numerous queries, resulting in limited cross-architecture transferability and high query costs. To address these limitations, we propose JAD, a latent diffusion model framework for black-box adversarial attacks. JAD generates adversarial examples by leveraging a latent diffusion model guided by attention maps distilled from both a convolutional neural network (CNN) and a Vision Transformer (ViT) models. By focusing on image regions that are commonly sensitive across architectures, this approach crafts adversarial perturbations that transfer effectively between different model types. This joint attention distillation strategy enables JAD to be architecture-agnostic, achieving superior attack generalization across diverse models. Moreover, the generative nature of the diffusion framework yields high adversarial sample generation efficiency by reducing reliance on iterative queries. Experiments demonstrate that JAD offers improved attack generalization, generation efficiency, and cross-architecture transferability compared to existing methods, providing a promising and effective paradigm for black-box adversarial attacks.

Runqing Yang, Yimin Fu, Changyuan Wu et al.

Existing open set recognition (OSR) methods are typically designed for static scenarios, where models aim to classify known classes and identify unknown ones within fixed scopes. This deviates from the expectation that the model should incrementally identify newly emerging unknown classes from continuous data streams and acquire corresponding knowledge. In such evolving scenarios, the discriminability of OSR decision boundaries is hard to maintain due to restricted access to former training data, causing severe inter-class confusion. To solve this problem, we propose retentive angular representation learning (RARL) for incremental open set recognition (IOSR). In RARL, unknown representations are encouraged to align around inactive prototypes within an angular space constructed under the equiangular tight frame, thereby mitigating excessive representation drift during knowledge updates. Specifically, we adopt a virtual-intrinsic interactive (VII) training strategy, which compacts known representations by enforcing clear inter-class margins through boundary-proximal virtual classes. Furthermore, a stratified rectification strategy is designed to refine decision boundaries, mitigating representation bias and feature space distortion caused by imbalances between old/new and positive/negative class samples. We conduct thorough evaluations on CIFAR100 and TinyImageNet datasets and establish a new benchmark for IOSR. Experimental results across various task setups demonstrate that the proposed method achieves state-of-the-art performance.

Yimin Fu, Zhunga Liu, Dongxiu Guo et al.

The acquisition of high-quality labeled synthetic aperture radar (SAR) data is challenging due to the demanding requirement for expert knowledge. Consequently, the presence of unreliable noisy labels is unavoidable, which results in performance degradation of SAR automatic target recognition (ATR). Existing research on learning with noisy labels mainly focuses on image data. However, the non-intuitive visual characteristics of SAR data are insufficient to achieve noise-robust learning. To address this problem, we propose collaborative learning of scattering and deep features (CLSDF) for SAR ATR with noisy labels. Specifically, a multi-model feature fusion framework is designed to integrate scattering and deep features. The attributed scattering centers (ASCs) are treated as dynamic graph structure data, and the extracted physical characteristics effectively enrich the representation of deep image features. Then, the samples with clean and noisy labels are divided by modeling the loss distribution with multiple class-wise Gaussian Mixture Models (GMMs). Afterward, the semi-supervised learning of two divergent branches is conducted based on the data divided by each other. Moreover, a joint distribution alignment strategy is introduced to enhance the reliability of co-guessed labels. Extensive experiments have been done on the Moving and Stationary Target Acquisition and Recognition (MSTAR) dataset, and the results show that the proposed method can achieve state-of-the-art performance under different operating conditions with various label noises.

Zaidao Wen, Jiaxiang Liu, Zhunga Liu et al.

This letter presents a novel framework termed DistSTN for the task of synthetic aperture radar (SAR) automatic target recognition (ATR). In contrast to the conventional SAR ATR algorithms, DistSTN considers a more challenging practical scenario for non-cooperative targets whose aspect angles for training are incomplete and limited in a partial range while those of testing samples are unlimited. To address this issue, instead of learning the pose invariant features, DistSTN newly involves an elaborated feature disentangling model to separate the learned pose factors of a SAR target from the identity ones so that they can independently control the representation process of the target image. To disentangle the explainable pose factors, we develop a pose discrepancy spatial transformer module in DistSTN to characterize the intrinsic transformation between the factors of two different targets with an explicit geometric model. Furthermore, DistSTN develops an amortized inference scheme that enables efficient feature extraction and recognition using an encoder-decoder mechanism. Experimental results with the moving and stationary target acquisition and recognition (MSTAR) benchmark demonstrate the effectiveness of our proposed approach. Compared with the other ATR algorithms, DistSTN can achieve higher recognition accuracy.