Weiyi Xiong

Weiyi Xiong, Jianan Liu, Tao Huang et al.

As an emerging technology and a relatively affordable device, the 4D imaging radar has already been confirmed effective in performing 3D object detection in autonomous driving. Nevertheless, the sparsity and noisiness of 4D radar point clouds hinder further performance improvement, and in-depth studies about its fusion with other modalities are lacking. On the other hand, as a new image view transformation strategy, "sampling" has been applied in a few image-based detectors and shown to outperform the widely applied "depth-based splatting" proposed in Lift-Splat-Shoot (LSS), even without image depth prediction. However, the potential of "sampling" is not fully unleashed. This paper investigates the "sampling" view transformation strategy on the camera and 4D imaging radar fusion-based 3D object detection. LiDAR Excluded Lean (LXL) model, predicted image depth distribution maps and radar 3D occupancy grids are generated from image perspective view (PV) features and radar bird's eye view (BEV) features, respectively. They are sent to the core of LXL, called "radar occupancy-assisted depth-based sampling", to aid image view transformation. We demonstrated that more accurate view transformation can be performed by introducing image depths and radar information to enhance the "sampling" strategy. Experiments on VoD and TJ4DRadSet datasets show that the proposed method outperforms the state-of-the-art 3D object detection methods by a significant margin without bells and whistles. Ablation studies demonstrate that our method performs the best among different enhancement settings.

Weiyi Xiong, Jianan Liu, Yuxuan Xia et al.

The automotive mmWave radar plays a key role in advanced driver assistance systems (ADAS) and autonomous driving. Deep learning-based instance segmentation enables real-time object identification from the radar detection points. In the conventional training process, accurate annotation is the key. However, high-quality annotations of radar detection points are challenging to achieve due to their ambiguity and sparsity. To address this issue, we propose a contrastive learning approach for implementing radar detection points-based instance segmentation. We define the positive and negative samples according to the ground-truth label, apply the contrastive loss to train the model first, and then perform fine-tuning for the following downstream task. In addition, these two steps can be merged into one, and pseudo labels can be generated for the unlabeled data to improve the performance further. Thus, there are four different training settings for our method. Experiments show that when the ground-truth information is only available for a small proportion of the training data, our method still achieves a comparable performance to the approach trained in a supervised manner with 100% ground-truth information.

Jianan Liu, Qiuchi Zhao, Weiyi Xiong et al.

The 4D Millimeter wave (mmWave) radar is a promising technology for vehicle sensing due to its cost-effectiveness and operability in adverse weather conditions. However, the adoption of this technology has been hindered by sparsity and noise issues in radar point cloud data. This paper introduces spatial multi-representation fusion (SMURF), a novel approach to 3D object detection using a single 4D imaging radar. SMURF leverages multiple representations of radar detection points, including pillarization and density features of a multi-dimensional Gaussian mixture distribution through kernel density estimation (KDE). KDE effectively mitigates measurement inaccuracy caused by limited angular resolution and multi-path propagation of radar signals. Additionally, KDE helps alleviate point cloud sparsity by capturing density features. Experimental evaluations on View-of-Delft (VoD) and TJ4DRadSet datasets demonstrate the effectiveness and generalization ability of SMURF, outperforming recently proposed 4D imaging radar-based single-representation models. Moreover, while using 4D imaging radar only, SMURF still achieves comparable performance to the state-of-the-art 4D imaging radar and camera fusion-based method, with an increase of 1.22% in the mean average precision on bird's-eye view of TJ4DRadSet dataset and 1.32% in the 3D mean average precision on the entire annotated area of VoD dataset. Our proposed method demonstrates impressive inference time and addresses the challenges of real-time detection, with the inference time no more than 0.05 seconds for most scans on both datasets. This research highlights the benefits of 4D mmWave radar and is a strong benchmark for subsequent works regarding 3D object detection with 4D imaging radar.

Weiyi Xiong, Bing Zhu

4D automotive radar is indispensable for autonomous driving due to its low cost and robustness, yet its point cloud sparsity challenges 3D object detection. Existing 4D radar-camera fusion methods focus on complex fusion strategies, trading inference speed for marginal gains. This trade-off hinders real-time deployment due to heavy computation on dense feature maps. In contrast, feature extraction from sparse radar points is less time-consuming but remains under-explored. This work uncovers that simply enhancing radar feature extraction can achieve comparable or even higher performance than elaborate fusion modules, while maintaining real-time performance. Based on this finding, we propose RCGDet3D, which centers on radar feature encoding and simplifies multi-modal fusion. Its encoder inherits from the efficient Gaussian Splatting-based Point Gaussian Encoder (PGE) in RadarGaussianDet3D with two key improvements. First, the Ray-centric PGE (R-PGE) predicts Gaussian attributes in ray-aligned coordinate systems before unifying them to Bird's-Eye View (BEV) space, significantly improving geometric consistency and reducing learning difficulty by decoupling the coordinate transformation from representation learning. Second, a Semantic Injection (SI) module incorporates visual cues from images, producing more geometrically accurate and semantically enriched radar features. Experiments on View-of-Delft (VoD) and TJ4DRadSet show that RCGDet3D outperforms state-of-the-art methods in both accuracy and speed, setting a new benchmark for real-time deployment.

Weiyi Xiong, Zean Zou, Qiuchi Zhao et al.

As the previous state-of-the-art 4D radar-camera fusion-based 3D object detection method, LXL utilizes the predicted image depth distribution maps and radar 3D occupancy grids to assist the sampling-based image view transformation. However, the depth prediction lacks accuracy and consistency, and the concatenation-based fusion in LXL impedes the model robustness. In this work, we propose LXLv2, where modifications are made to overcome the limitations and improve the performance. Specifically, considering the position error in radar measurements, we devise a one-to-many depth supervision strategy via radar points, where the radar cross section (RCS) value is further exploited to adjust the supervision area for object-level depth consistency. Additionally, a channel and spatial attention-based fusion module named CSAFusion is introduced to improve feature adaptiveness. Experimental results on the View-of-Delft and TJ4DRadSet datasets show that the proposed LXLv2 can outperform LXL in detection accuracy, inference speed and robustness, demonstrating the effectiveness of the model.

Bing Zhu, Zixin He, Weiyi Xiong et al.

Millimeter wave (mmWave) radar is a non-intrusive privacy and relatively convenient and inexpensive device, which has been demonstrated to be applicable in place of RGB cameras in human indoor pose estimation tasks. However, mmWave radar relies on the collection of reflected signals from the target, and the radar signals containing information is difficult to be fully applied. This has been a long-standing hindrance to the improvement of pose estimation accuracy. To address this major challenge, this paper introduces a probability map guided multi-format feature fusion model, ProbRadarM3F. This is a novel radar feature extraction framework using a traditional FFT method in parallel with a probability map based positional encoding method. ProbRadarM3F fuses the traditional heatmap features and the positional features, then effectively achieves the estimation of 14 keypoints of the human body. Experimental evaluation on the HuPR dataset proves the effectiveness of the model proposed in this paper, outperforming other methods experimented on this dataset with an AP of 69.9 %. The emphasis of our study is focusing on the position information that is not exploited before in radar singal. This provides direction to investigate other potential non-redundant information from mmWave rader.

Weiyi Xiong, Bing Zhu, Tao Huang et al.

4D automotive radars have gained increasing attention for autonomous driving due to their low cost, robustness, and inherent velocity measurement capability. However, existing 4D radar-based 3D detectors rely heavily on pillar encoders for BEV feature extraction, where each point contributes to only a single BEV grid, resulting in sparse feature maps and degraded representation quality. In addition, they also optimize bounding box attributes independently, leading to sub-optimal detection accuracy. Moreover, their inference speed, while sufficient for high-end GPUs, may fail to meet the real-time requirement on vehicle-mounted embedded devices. To overcome these limitations, an efficient and effective Gaussian-based 3D detector, namely RadarGaussianDet3D is introduced, leveraging Gaussian primitives and distributions as intermediate representations for radar points and bounding boxes. In RadarGaussianDet3D, a novel Point Gaussian Encoder (PGE) is designed to transform each point into a Gaussian primitive after feature aggregation and employs the 3D Gaussian Splatting (3DGS) technique for BEV rasterization, yielding denser feature maps. PGE exhibits exceptionally low latency, owing to the optimized algorithm for point feature aggregation and fast rendering of 3DGS. In addition, a new Box Gaussian Loss (BGL) is proposed, which converts bounding boxes into 3D Gaussian distributions and measures their distance to enable more comprehensive and consistent optimization. Extensive experiments on TJ4DRadSet and View-of-Delft demonstrate that RadarGaussianDet3D achieves state-of-the-art detection accuracy while delivering substantially faster inference, highlighting its potential for real-time deployment in autonomous driving.

Jianan Liu, Weiyi Xiong, Liping Bai et al.

Automotive radar provides reliable environmental perception in all-weather conditions with affordable cost, but it hardly supplies semantic and geometry information due to the sparsity of radar detection points. With the development of automotive radar technologies in recent years, instance segmentation becomes possible by using automotive radar. Its data contain contexts such as radar cross section and micro-Doppler effects, and sometimes can provide detection when the field of view is obscured. The outcome from instance segmentation could be potentially used as the input of trackers for tracking targets. The existing methods often utilize a clustering-based classification framework, which fits the need of real-time processing but has limited performance due to minimum information provided by sparse radar detection points. In this paper, we propose an efficient method based on clustering of estimated semantic information to achieve instance segmentation for the sparse radar detection points. In addition, we show that the performance of the proposed approach can be further enhanced by incorporating the visual multi-layer perceptron. The effectiveness of the proposed method is verified by experimental results on the popular RadarScenes dataset, achieving 89.53% mean coverage and 86.97% mean average precision with the IoU threshold of 0.5, which is superior to other approaches in the literature. More significantly, the consumed memory is around 1MB, and the inference time is less than 40ms, indicating that our proposed algorithm is storage and time efficient. These two criteria ensure the practicality of the proposed method in real-world systems.