Cecilia Laschi

Zhihang Qin, Yueheng Zhang, Wan Su et al.

Conventional fluid-driven soft grippers typically depend on external sources, which limit portability and long-term autonomy. This work introduces a self-contained soft gripper with fixed size that operates solely through internal liquid redistribution among three interconnected bistable snap-through chambers. When the top sensing chamber deforms upon contact, the displaced liquid triggers snap-through expansion of the grasping chambers, enabling stable and size-selective grasping without continuous energy input. The internal hydraulic feedback further allows passive adaptation of gripping pressure to object stiffness. This source-free and compact design opens new possibilities for lightweight, stiffness-adaptive fluid-driven manipulation in soft robotics, providing a feasible approach for targeted size-specific sampling and operation in underwater and field environments.

Yuli Song, Wenbo Li, Wenci Xin et al.

Hyper-redundant robots offer high dexterity, making them good at operating in confined and unstructured environments. To extend the reachable workspace, we built a multi-segment flexible rack actuated planar robot. However, the compliance of the flexible mechanism introduces instability, rendering it sensitive to external and internal uncertainties. To address these limitations, we propose a hybrid kinematics-informed and learning-based shape control method, named SpatioCoupledNet. The neural network adopts a hierarchical design that explicitly captures bidirectional spatial coupling between segments while modeling local disturbance along the robot body. A confidence-gating mechanism integrates prior kinematic knowledge, allowing the controller to adaptively balance model-based and learned components for improved convergence and fidelity. The framework is validated on a five-segment planar hyper-redundant robot under three representative shape configurations. Experimental results demonstrate that the proposed method consistently outperforms both analytical and purely neural controllers. In complex scenarios, it reduces steady-state error by up to 75.5% against the analytical model, and accelerates convergence by up to 20.5% compared to the data-driven baseline. Furthermore, gating analysis reveals a state-dependent authority fusion, shifting toward data-driven predictions in unstable states, while relying on physical priors in the remaining cases. Finally, we demonstrate robust performance in a dynamic task where the robot maintains a fixed end-effector position while avoiding moving obstacles, achieving a precise tip-positioning accuracy with a mean error of 10.47 mm.

Linxin Hou, Qirui Wu, Zhihang Qin et al.

This paper proposes SoftGM, an octopus-inspired distributed control architecture for segmented soft robotic arms that learn to reach targets in contact-rich environments using online obstacle discovery without relying on global obstacle geometry. SoftGM formulates each arm section as a cooperative agent and represents the arm-environment interaction as a graph. SoftGM uses a two-stage graph attention message passing scheme following a Centralised Training Decentralised Execution (CTDE) paradigm with a centralised critic and decentralised actor. We evaluate SoftGM in a Cosserat-rod simulator (PyElastica) across three tasks that increase the complexity of the environment: obstacle-free, structured obstacles, and a wall-with-hole scenario. Compared with six widely used MARL baselines (IDDPG, IPPO, ISAC, MADDPG, MAPPO, MASAC) under identical information content and training conditions, SoftGM matches strong CTDE methods in simpler settings and achieves the best performance in the wall-with-hole task. Robustness tests with observation noise, single-section actuation failure, and transient disturbances show that SoftGM preserves success while keeping control effort bounded, indicating resilient coordination driven by selective contact-relevant information routing.

Yiyuan Zhang, Anye Zhong, Junkai Chen et al.

Cephalopod pulsed-jet locomotion is not a single isolated expulsion event, but a coordinated cycle involving jet expulsion, passive gliding, and mantle refilling. Inspired by this cycle-resolved biological strategy, this paper presents a cephalopod-inspired pulsed-jet robot with a rigid-soft hybrid origami mantle that enables large, actively driven, and geometry-guided body deformation. The proposed mantle integrates rigid folding panels with a compliant silicone framework, allowing a 75% effective cavity-volume reduction during expulsion and reducing the projected cross-sectional drag area by approximately 75.7% in the contracted gliding configuration. Using this platform, we formulate a cycle-resolved framework to separately investigate how expelled volume, glide duration, and refill pathway influence whole-cycle locomotion performance. Experiments show that the robot reaches a peak speed of approximately 0.5 m/s (3.8 BL/s) and an average speed exceeding 0.2 m/s (1.5 BL/s) within the first jetting cycle. The results further demonstrate the roles of high expelled-volume-ratio contraction in speed generation, reduced-drag-area gliding under different glide durations, and mantle-aperture-inspired passive inlet valves in assisting refill. This work provides both a robotic implementation of actively deformable cephalopod-like jet propulsion and a unified experimental platform for studying expulsion-gliding-refilling dynamics in pulsed-jet locomotion.

Chenrui Zhang, Yiyuan Zhang, Yunfei Ye et al.

Underwater robots are widely deployed for ocean exploration and manipulation. Underactuated mechanisms are particularly advantageous in aquatic environments, as reducing actuator count lowers the risk of motor leakage while introducing inherent mechanical compliance. However, accurate modeling of underwater underactuated and soft robotic systems remains challenging because it requires identifying a high-dimensional set of internal structural and external hydrodynamic parameters. In this work, we propose a trajectory-driven global optimization framework for unified structural-hydrodynamic modeling of underwater multibody systems. Inspired by the Covariance Matrix Adaptation Evolution Strategy (CMA-ES), the proposed approach simultaneously identifies coupled internal elastic, damping, and distributed hydrodynamic parameters through trajectory-level matching between simulation and experimental motion. This enables high-fidelity reproduction of both underactuated mechanisms and compliant soft robotic systems in underwater environments. We first validate the framework on a link-by-link underactuated multibody mechanism, demonstrating accurate identification of distributed hydrodynamic coefficients, with a normalized end effector position error below 5% across multiple trajectories, varying initial conditions, and both active-passive and fully passive configurations. The identified modeling strategy is then transferred to a single octopus-inspired soft arm, showing strong real-to-sim consistency without manual retuning. Finally, eight identified arms are assembled into a swimming octopus robot, where the unified parameter set enables realistic whole body behavior without additional parameter calibration. These results demonstrate the scalability and transferability of the proposed structural-hydrodynamic modeling framework across underwater underactuated and soft robotic systems.

João Damião Almeida, Egidio Falotico, Cecilia Laschi et al.

In-hand manipulation tasks, particularly in human-inspired robotic systems, must rely on distributed tactile sensing to achieve precise control across a wide variety of tasks. However, the optimal configuration of this network of sensors is a complex problem, and while the fingertips are a common choice for placing sensors, the contribution of tactile information from other regions of the hand is often overlooked. This work investigates the impact of tactile feedback from various regions of the fingers and palm in performing in-hand object reorientation tasks. We analyze how sensory feedback from different parts of the hand influences the robustness of deep reinforcement learning control policies and investigate the relationship between object characteristics and optimal sensor placement. We identify which tactile sensing configurations contribute to improving the efficiency and accuracy of manipulation. Our results provide valuable insights for the design and use of anthropomorphic end-effectors with enhanced manipulation capabilities.

Murat Kirtay, Ugo Albanese, Lorenzo Vannucci et al.

This document presents novel datasets, constructed by employing the iCub robot equipped with an additional depth sensor and color camera. We used the robot to acquire color and depth information for 210 objects in different acquisition scenarios. At this end, the results were large scale datasets for robot and computer vision applications: object representation, object recognition and classification, and action recognition.

Thomas George Thuruthel, Syed Haider Abidi, Matteo Cianchetti et al.

Soft robotic grippers are shown to be high effective for grasping unstructured objects with simple sensing and control strategies. However, they are still limited by their speed, sensing capabilities and actuation mechanism. Hence, their usage have been restricted in highly dynamic grasping tasks. This paper presents a soft robotic gripper with tunable bistable properties for sensor-less dynamic grasping. The bistable mechanism allows us to store arbitrarily large strain energy in the soft system which is then released upon contact. The mechanism also provides flexibility on the type of actuation mechanism as the grasping and sensing phase is completely passive. Theoretical background behind the mechanism is presented with finite element analysis to provide insights into design parameters. Finally, we experimentally demonstrate sensor-less dynamic grasping of an unknown object within 0.02 seconds, including the time to sense and actuate.

Francesco Corucci, Nick Cheney, Francesco Giorgio-Serchi et al.

Designing soft robots poses considerable challenges: automated design approaches may be particularly appealing in this field, as they promise to optimize complex multi-material machines with very little or no human intervention. Evolutionary soft robotics is concerned with the application of optimization algorithms inspired by natural evolution in order to let soft robots (both morphologies and controllers) spontaneously evolve within physically-realistic simulated environments, figuring out how to satisfy a set of objectives defined by human designers. In this paper a powerful evolutionary system is put in place in order to perform a broad investigation on the free-form evolution of walking and swimming soft robots in different environments. Three sets of experiments are reported, tackling different aspects of the evolution of soft locomotion. The first two sets explore the effects of different material properties on the evolution of terrestrial and aquatic soft locomotion: particularly, we show how different materials lead to the evolution of different morphologies, behaviors, and energy-performance tradeoffs. It is found that within our simplified physics world stiffer robots evolve more sophisticated and effective gaits and morphologies on land, while softer ones tend to perform better in water. The third set of experiments starts investigating the effect and potential benefits of major environmental transitions (land - water) during evolution. Results provide interesting morphological exaptation phenomena, and point out a potential asymmetry between land-water and water-land transitions: while the first type of transition appears to be detrimental, the second one seems to have some beneficial effects.

Vito Cacucciolo, Federico Renda, Ernesto Poccia et al.

Soft actuators are receiving increasing attention from the engineering community, not only in research but even for industrial applications. Among soft actuators, fibre-reinforced Bending Fluidic Actuators (BFAs) became very popular thanks to features such as robustness and easy design and fabrication. However, an accurate modelling of these smart structures, taking into account all the nonlinearities involved, is a challenging task. In this effort, we propose an analytical mechanical model to capture the quasi-static response of fibre-reinforced BFAs. The model is fully 3D and for the first time includes the effect of the pressure on the lateral surface of the chamber as well as the non-constant torque produced by the pressure at the tip. The presented model can be used for design and control, while providing information about the mechanics of these complex actuators.