Elisa Donati

Elisa Donati, Simone Benatti, Enea Ceolini et al.

Discrimination of hand gestures based on the decoding of surface electromyography (sEMG) signals is a well-establish approach for controlling prosthetic devices and for Human-Machine Interfaces (HMI). However, despite the promising results achieved by this approach in well-controlled experimental conditions, its deployment in long-term real-world application scenarios is still hindered by several challenges. One of the most critical challenges is maintaining high EMG data classification performance across multiple days without retraining the decoding system. The drop in performance is mostly due to the high EMG variability caused by electrodes shift, muscle artifacts, fatigue, user adaptation, or skin-electrode interfacing issues. Here we propose a novel statistical method based on canonical correlation analysis (CCA) that stabilizes EMG classification performance across multiple days for long-term control of prosthetic devices. We show how CCA can dramatically decrease the performance drop of standard classifiers observed across days, by maximizing the correlation among multiple-day acquisition data sets. Our results show how the performance of a classifier trained on EMG data acquired only of the first day of the experiment maintains 90% relative accuracy across multiple days, compensating for the EMG data variability that occurs over long-term periods, using the CCA transformation on data obtained from a small number of gestures. This approach eliminates the need for large data sets and multiple or periodic training sessions, which currently hamper the usability of conventional pattern recognition based approaches

Federica Ferrari, Flavia Davidhi, Bernard Maacaron et al.

Maintaining stable internal representations of continuous variables is fundamental for effective robotic control. Continuous attractor networks provide a biologically inspired mechanism for encoding such variables, yet neuromorphic realizations have rarely addressed proprioceptive estimation under resource constraints. This work introduces a spiking ring-attractor network representing a robot joint angle through self-sustaining population activity. Local excitation and broad inhibition support a stable activity bump, while velocity-modulated asymmetries drive its translation and boundary conditions confine motion within mechanical limits. The network reproduces smooth trajectory tracking and remains stable near joint limits, showing reduced drift and improved accuracy compared to unbounded models. Such compact hardware-compatible implementation preserves multi-second stability demonstrating a near-linear relationship between bump velocity and synaptic modulation.

Fernando M. Quintana, Maryada, Pedro L. Galindo et al.

Developing dedicated mixed-signal neuromorphic computing systems optimized for real-time sensory-processing in extreme edge-computing applications requires time-consuming design, fabrication, and deployment of full-custom neuromorphic processors. To ensure that initial prototyping efforts, exploring the properties of different network architectures and parameter settings, lead to realistic results, it is important to use simulation frameworks that match as best as possible the properties of the final hardware. This is particularly challenging for neuromorphic hardware platforms made using mixed-signal analog/digital circuits, due to the variability and noise sensitivity of their components. In this paper, we address this challenge by developing a software spiking neural network simulator explicitly designed to account for the properties of mixed-signal neuromorphic circuits, including device mismatch variability. The simulator, called ARCANA (A Realistic Simulation Framework for Analog/Digital Neuromorphic Architectures), is designed to reproduce the dynamics of mixed-signal synapse and neuron electronic circuits with autogradient differentiation for parameter optimization and GPU acceleration. We demonstrate the effectiveness of this approach by matching software simulation results with measurements made from an existing neuromorphic processor. We show how the results obtained provide a reliable estimate of the behavior of the spiking neural network trained in software, once deployed in hardware. This framework enables the development and innovation of new learning rules and processing architectures in neuromorphic embedded systems.

Jiahui An, Sara Irina Fabrikant, Giacomo Indiveri et al.

Accurately assessing mental workload is crucial in cognitive neuroscience, human-computer interaction, and real-time monitoring, as cognitive load fluctuations affect performance and decision-making. While Electroencephalography (EEG) based machine learning (ML) models can be used to this end, their high computational cost hinders embedded real-time applications. Hardware implementations of spiking neural networks (SNNs) offer a promising alternative for low-power, fast, event-driven processing. This study compares hardware compatible SNN models with various traditional ML ones, using an open-source multimodal dataset. Our results show that multimodal integration improves accuracy, with SNN performance comparable to the ML one, demonstrating their potential for real-time implementations of cognitive load detection. These findings position event-based processing as a promising solution for low-latency, energy efficient workload monitoring in adaptive closed-loop embedded devices that dynamically regulate cognitive load.

Nia Touko, Matthew O A Ellis, Cristiano Capone et al.

Reliable long-term decoding of surface electromyography (EMG) is hindered by signal drift caused by electrode shifts, muscle fatigue, and posture changes. While state-of-the-art models achieve high intra-session accuracy, their performance often degrades sharply. Existing solutions typically demand large datasets or high-compute pipelines that are impractical for energy-efficient wearables. We propose a lightweight framework for Test-Time Adaptation (TTA) using a Temporal Convolutional Network (TCN) backbone. We introduce three deployment-ready strategies: (i) causal adaptive batch normalization for real-time statistical alignment; (ii) a Gaussian Mixture Model (GMM) alignment with experience replay to prevent forgetting; and (iii) meta-learning for rapid, few-shot calibration. Evaluated on the NinaPro DB6 multi-session dataset, our framework significantly bridges the inter-session accuracy gap with minimal overhead. Our results show that experience-replay updates yield superior stability under limited data, while meta-learning achieves competitive performance in one- and two-shot regimes using only a fraction of the data required by current benchmarks. This work establishes a path toward robust, "plug-and-play" myoelectric control for long-term prosthetic use.

Chiara De Luca, Elisa Donati

Queen bee presence is essential for the health and stability of honeybee colonies, yet current monitoring methods rely on manual inspections that are labor-intensive, disruptive, and impractical for large-scale beekeeping. While recent audio-based approaches have shown promise, they often require high power consumption, complex preprocessing, and are susceptible to ambient noise. To overcome these limitations, we propose a lightweight, multimodal system for queen detection based on environmental sensor fusion-specifically, temperature, humidity, and pressure differentials between the inside and outside of the hive. Our approach employs quantized decision tree inference on a commercial STM32 microcontroller, enabling real-time, low-power edge computing without compromising accuracy. We show that our system achieves over 99% queen detection accuracy using only environmental inputs, with audio features offering no significant performance gain. This work presents a scalable and sustainable solution for non-invasive hive monitoring, paving the way for autonomous, precision beekeeping using off-the-shelf, energy-efficient hardware.

Yuqi Ding, Elisa Donati, Haobo Li et al.

Wearable health devices have a strong demand in real-time biomedical signal processing. However traditional methods often require data transmission to centralized processing unit with substantial computational resources after collecting it from edge devices. Neuromorphic computing is an emerging field that seeks to design specialized hardware for computing systems inspired by the structure, function, and dynamics of the human brain, offering significant advantages in latency and power consumption. This paper explores a novel neuromorphic implementation approach for gesture recognition by extracting spatiotemporal spiking information from surface electromyography (sEMG) data in an event-driven manner. At the same time, the network was designed by implementing a simple-structured and hardware-friendly Physical Reservoir Computing (PRC) framework called Rotating Neuron Reservoir (RNR) within the domain of Spiking neural network (SNN). The spiking RNR (sRNR) is promising to pipeline an innovative solution to compact embedded wearable systems, enabling low-latency, real-time processing directly at the sensor level. The proposed system was validated by an open-access large-scale sEMG database and achieved an average classification accuracy of 74.6\% and 80.3\% using a classical machine learning classifier and a delta learning rule algorithm respectively. While the delta learning rule could be fully spiking and implementable on neuromorphic chips, the proposed gesture recognition system demonstrates the potential for near-sensor low-latency processing.

Jingyue Zhao, Nicoletta Risi, Marco Monforte et al.

Despite neuromorphic engineering promises the deployment of low latency, adaptive and low power systems that can lead to the design of truly autonomous artificial agents, the development of a fully neuromorphic artificial agent is still missing. While neuromorphic sensing and perception, as well as decision-making systems, are now mature, the control and actuation part is lagging behind. In this paper, we present a closed-loop motor controller implemented on mixed-signal analog-digital neuromorphic hardware using a spiking neural network. The network performs a proportional control action by encoding target, feedback, and error signals using a spiking relational network. It continuously calculates the error through a connectivity pattern, which relates the three variables by means of feed-forward connections. Recurrent connections within each population are used to speed up the convergence, decrease the effect of mismatch and improve selectivity. The neuromorphic motor controller is interfaced with the iCub robot simulator. We tested our spiking P controller in a single joint control task, specifically for the robot head yaw. The spiking controller sends the target positions, reads the motor state from its encoder, and sends back the motor commands to the joint. The performance of the spiking controller is tested in a step response experiment and in a target pursuit task. In this work, we optimize the network structure to make it more robust to noisy inputs and device mismatch, which leads to better control performances.

Mostafa Rahimi Azghadi, Corey Lammie, Jason K. Eshraghian et al.

The advent of dedicated Deep Learning (DL) accelerators and neuromorphic processors has brought on new opportunities for applying both Deep and Spiking Neural Network (SNN) algorithms to healthcare and biomedical applications at the edge. This can facilitate the advancement of medical Internet of Things (IoT) systems and Point of Care (PoC) devices. In this paper, we provide a tutorial describing how various technologies including emerging memristive devices, Field Programmable Gate Arrays (FPGAs), and Complementary Metal Oxide Semiconductor (CMOS) can be used to develop efficient DL accelerators to solve a wide variety of diagnostic, pattern recognition, and signal processing problems in healthcare. Furthermore, we explore how spiking neuromorphic processors can complement their DL counterparts for processing biomedical signals. The tutorial is augmented with case studies of the vast literature on neural network and neuromorphic hardware as applied to the healthcare domain. We benchmark various hardware platforms by performing a sensor fusion signal processing task combining electromyography (EMG) signals with computer vision. Comparisons are made between dedicated neuromorphic processors and embedded AI accelerators in terms of inference latency and energy. Finally, we provide our analysis of the field and share a perspective on the advantages, disadvantages, challenges, and opportunities that various accelerators and neuromorphic processors introduce to healthcare and biomedical domains.

Enea Ceolini, Gemma Taverni, Lyes Khacef et al.

The discrimination of human gestures using wearable solutions is extremely important as a supporting technique for assisted living, healthcare of the elderly and neurorehabilitation. This paper presents a mobile electromyography (EMG) analysis framework to be an auxiliary component in physiotherapy sessions or as a feedback for neuroprosthesis calibration. We implemented a framework that allows the integration of multisensors, EMG and visual information, to perform sensor fusion and to improve the accuracy of hand gesture recognition tasks. In particular, we used an event-based camera adapted to run on the limited computational resources of mobile phones. We introduced a new publicly available dataset of sensor fusion for hand gesture recognition recorded from 10 subjects and used it to train the recognition models offline. We compare the online results of the hand gesture recognition using the fusion approach with the individual sensors with an improvement in the accuracy of 13% and 11%, for EMG and vision respectively, reaching 85%.