Binhang Qi

Binhang Qi, Hailong Sun, Hongyu Zhang et al.

Deep neural network (DNN) models have become increasingly crucial components in intelligent software systems. However, training a DNN model is typically expensive in terms of both time and money. To address this issue, researchers have recently focused on reusing existing DNN models - borrowing the idea of code reuse in software engineering. However, reusing an entire model could cause extra overhead or inherits the weakness from the undesired functionalities. Hence, existing work proposes to decompose an already trained model into modules, i.e., modularizing-after-training, and enable module reuse. Since trained models are not built for modularization, modularizing-after-training incurs huge overhead and model accuracy loss. In this paper, we propose a novel approach that incorporates modularization into the model training process, i.e., modularizing-while-training (MwT). We train a model to be structurally modular through two loss functions that optimize intra-module cohesion and inter-module coupling. We have implemented the proposed approach for modularizing Convolutional Neural Network (CNN) models in this work. The evaluation results on representative models demonstrate that MwT outperforms the state-of-the-art approach. Specifically, the accuracy loss caused by MwT is only 1.13 percentage points, which is 1.76 percentage points less than that of the baseline. The kernel retention rate of the modules generated by MwT is only 14.58%, with a reduction of 74.31% over the state-of-the-art approach. Furthermore, the total time cost required for training and modularizing is only 108 minutes, half of the baseline.

Binhang Qi, Hailong Sun, Xiang Gao et al.

Training deep neural network (DNN) models, which has become an important task in today's software development, is often costly in terms of computational resources and time. With the inspiration of software reuse, building DNN models through reusing existing ones has gained increasing attention recently. Prior approaches to DNN model reuse have two main limitations: 1) reusing the entire model, while only a small part of the model's functionalities (labels) are required, would cause much overhead (e.g., computational and time costs for inference), and 2) model reuse would inherit the defects and weaknesses of the reused model, and hence put the new system under threats of security attack. To solve the above problem, we propose SeaM, a tool that re-engineers a trained DNN model to improve its reusability. Specifically, given a target problem and a trained model, SeaM utilizes a gradient-based search method to search for the model's weights that are relevant to the target problem. The re-engineered model that only retains the relevant weights is then reused to solve the target problem. Evaluation results on widely-used models show that the re-engineered models produced by SeaM only contain 10.11% weights of the original models, resulting 42.41% reduction in terms of inference time. For the target problem, the re-engineered models even outperform the original models in classification accuracy by 5.85%. Moreover, reusing the re-engineered models inherits an average of 57% fewer defects than reusing the entire model. We believe our approach to reducing reuse overhead and defect inheritance is one important step forward for practical model reuse.

Binhang Qi, Hailong Sun, Xiang Gao et al.

Despite great success in many applications, deep neural networks are not always robust in practice. For instance, a convolutional neuron network (CNN) model for classification tasks often performs unsatisfactorily in classifying some particular classes of objects. In this work, we are concerned with patching the weak part of a CNN model instead of improving it through the costly retraining of the entire model. Inspired by the fundamental concepts of modularization and composition in software engineering, we propose a compressed modularization approach, CNNSplitter, which decomposes a strong CNN model for $N$-class classification into $N$ smaller CNN modules. Each module is a sub-model containing a part of the convolution kernels of the strong model. To patch a weak CNN model that performs unsatisfactorily on a target class (TC), we compose the weak CNN model with the corresponding module obtained from a strong CNN model. The ability of the weak CNN model to recognize the TC can thus be improved through patching. Moreover, the ability to recognize non-TCs is also improved, as the samples misclassified as TC could be classified as non-TCs correctly. Experimental results with two representative CNNs on three widely-used datasets show that the averaged improvement on the TC in terms of precision and recall are 12.54% and 2.14%, respectively. Moreover, patching improves the accuracy of non-TCs by 1.18%. The results demonstrate that CNNSplitter can patch a weak CNN model through modularization and composition, thus providing a new solution for developing robust CNN models.

Binhang Qi, Yun Lin, Xinyi Weng et al.

Test cases are essential for software development and maintenance. In practice, developers derive multiple test cases from an implicit pattern based on their understanding of requirements and inference of diverse test scenarios, each validating a specific behavior of the focal method. However, producing comprehensive tests is time-consuming and error-prone: many important tests that should have accompanied the initial test are added only after a significant delay, sometimes only after bugs are triggered. Existing automated test generation techniques largely focus on code coverage. Yet in real projects, practical tests are seldom driven by code coverage alone, since test scenarios do not necessarily align with control-flow branches. Instead, test scenarios originate from requirements, which are often undocumented and implicitly embedded in a project's design and implementation. However, developer-written tests are frequently treated as executable specifications; thus, even a single initial test that reflects the developer's intent can reveal the underlying requirement and the diverse scenarios that should be validated. In this work, we propose TestGeneralizer, a framework for generalizing test cases to comprehensively cover test scenarios. TestGeneralizer orchestrates three stages: (1) enhancing the understanding of the requirement and scenario behind the focal method and initial test; (2) generating a test scenario template and crystallizing it into various test scenario instances; and (3) generating and refining executable test cases from these instances. We evaluate TestGeneralizer against three state-of-the-art baselines on 12 open-source Java projects. TestGeneralizer achieves significant improvements: +31.66% and +23.08% over ChatTester, in mutation-based and LLM-assessed scenario coverage, respectively.

Chenyan Liu, Yun Lin, Yuhuan Huang et al.

In industrial and open-source software engineering tasks, developers often perform project-wise code editing tasks, including feature enhancement, refactoring, and bug fixing, where the leading AI models are expected to support the productivity. Hence, researchers and practitioners have proposed and adopted many LLM-based solutions to facilitate their real-world development. However, they largely suffer from the balance among predicting scope, accuracy, and efficiency. For example, solutions like Cursor achieve high accuracy only in a local editing scope while its performance drops on cross-file edits. In contrast, solutions like CoEdPilot exhibit efficiency limitations when used to predict project-wise edits. In this work, we propose TRACE (Tool-integrated RecommendAtion for Code Editing), a novel subsequent code editing solution to push the boundary of scope, accuracy, and efficiency. Our rationale lies in that code edits are triggered for either semantic or syntactic reasons. Therefore, TRACE predicts subsequent edits by interleaving neural-based induction for semantic edit prediction and tool-based deduction for syntactic edit prediction. The tools can be any IDE facilities, such as refactoring tools (e.g., rename) or linting tools (e.g., use-def), providing decent performance of deducing edit-location and edit-generation. Technically, we address the challenge of (1) when to interleave between neural-based and tool-based prediction and (2) how to further improve the performance of neural-based prediction. As for the former, we learn a neural model to detect when to invoke IDE editing tools. As for the latter, we propose a novel and fine-grained editing representation to further boost the performance of neural editing models. ......

Chenyan Liu, Yun Lin, Jiaxin Chang et al.

Large language models (LLMs) for code editing have achieved remarkable progress, yet recent empirical studies reveal a fundamental disconnect between technical accuracy and developer productivity. Despite their strong benchmark performance, developers complete tasks 19% slower when using AI assistance, with over 68.81% of recommendations disrupting their mental flow. This misalignment stems from the use of static commit snapshots that lack temporal information, causing models to optimize for end results rather than the incremental, context-sensitive steps that align with developers' natural reasoning process. To bridge this gap, we present EditFlow, which benchmarks and optimizes subsequent code edit recommendation systems through the reconstruction of developer editing flows. EditFlow addresses three key challenges. First, collecting edit-order data that reflects developers' flow is inherently difficult: manual annotation introduces prohibitive overhead, while development logs capture only single trajectories instead of all plausible editing flows. Second, benchmarking recommendation performance against developers' ongoing editing flow requires a digital-twin-like simulation that can faithfully simulate the editing process. Third, existing heterogeneous systems vary drastically in scale and architecture, posing challenges for developing a unified optimization strategy that endows all models with mental-flow awareness regardless of design or capability. ......

Xiaohan Bi, Binhang Qi, Hailong Sun et al.

With the growing incorporation of deep neural network (DNN) models into modern software systems, the prohibitive construction costs have become a significant challenge. Model reuse has been widely applied to reduce training costs, but indiscriminately reusing entire models may incur significant inference overhead. Consequently, DNN modularization has gained attention, enabling module reuse by decomposing DNN models. The emerging modularizing-while-training (MwT) paradigm, which incorporates modularization into training, outperforms modularizing-after-training approaches. However, existing MwT methods focus on small-scale CNN models at the convolutional kernel level and struggle with diverse DNNs and large-scale models, particularly Transformer-based models. To address these limitations, we propose NeMo, a scalable and generalizable MwT approach. NeMo operates at the neuron level fundamental component common to all DNNs-ensuring applicability to Transformers and various architectures. We design a contrastive learning-based modular training method with an effective composite loss function, enabling scalability to large-scale models. Comprehensive experiments on two Transformer-based models and four CNN models across two classification datasets demonstrate NeMo's superiority over state-of-the-art MwT methods. Results show average gains of 1.72% in module classification accuracy and 58.10% reduction in module size, demonstrating efficacy across both CNN and large-scale Transformer-based models. A case study on open-source projects shows NeMo's potential benefits in practical scenarios, offering a promising approach for scalable and generalizable DNN modularization.

Xi Weng, Jianing An, Xudong Ma et al.

Self-supervised learning (SSL) methods via joint embedding architectures have proven remarkably effective at capturing semantically rich representations with strong clustering properties, magically in the absence of label supervision. Despite this, few of them have explored leveraging these untapped properties to improve themselves. In this paper, we provide an evidence through various metrics that the encoder's output $encoding$ exhibits superior and more stable clustering properties compared to other components. Building on this insight, we propose a novel positive-feedback SSL method, termed Representation Self-Assignment (ReSA), which leverages the model's clustering properties to promote learning in a self-guided manner. Extensive experiments on standard SSL benchmarks reveal that models pretrained with ReSA outperform other state-of-the-art SSL methods by a significant margin. Finally, we analyze how ReSA facilitates better clustering properties, demonstrating that it effectively enhances clustering performance at both fine-grained and coarse-grained levels, shaping representations that are inherently more structured and semantically meaningful.

Zongzhen Yang, Binhang Qi, Hailong Sun et al.

Model merging based on task vectors, i.e., the parameter differences between fine-tuned models and a shared base model, provides an efficient way to integrate multiple task-specific models into a multitask model without retraining. Recent works have endeavored to address the conflicts between task vectors, one of the significant challenges faced by model merging, through sparsification; however, two issues significantly limit their performance: high parameter overlap and unbalanced weight distribution. To address these issues, we propose a simple, yet effective framework called CABS (Conflict-Aware and Balanced Sparsification), consisting of Conflict-Aware Sparsification (CA) and Balanced Sparsification (BS). CA can reduce parameter overlap by applying masks during sequential pruning, ensuring that each task vector retains distinct, non-overlapping parameters. BS leverages $n$: $m$ pruning to preserve critical weights while maintaining an even distribution across layers. Our comprehensive experiments demonstrate that CABS outperforms state-of-the-art methods across diverse tasks and model sizes.