Muhammad Baqer Mollah

Muhammad Baqer Mollah, Honggang Wang, Hua Fang

Beamforming techniques are considered as essential parts to compensate the severe path loss in millimeter-wave (mmWave) communications by adopting large antenna arrays and formulating narrow beams to obtain satisfactory received powers. However, performing accurate beam alignment over such narrow beams for efficient link configuration by traditional beam selection approaches, mainly relied on channel state information, typically impose significant latency and computing overheads, which is often infeasible in vehicle-to-vehicle (V2V) communications like highly dynamic scenarios. In contrast, utilizing out-of-band contextual information, such as vehicular position information, is a potential alternative to reduce such overheads. In this context, this paper presents a deep learning-based solution on utilizing the vehicular position information for predicting the optimal beams having sufficient mmWave received powers so that the best V2V line-of-sight links can be ensured proactively. After experimental evaluation of the proposed solution on real-world measured mmWave sensing and communications datasets, the results show that the solution can achieve up to 84.58% of received power of link status on average, which confirm a promising solution for beamforming in mmWave at 60 GHz enabled V2V communications.

Muhammad Baqer Mollah, Honggang Wang, Mohammad Ataul Karim et al.

Beamforming techniques are considered as essential parts to compensate severe path losses in millimeter-wave (mmWave) communications. In particular, these techniques adopt large antenna arrays and formulate narrow beams to obtain satisfactory received powers. However, performing accurate beam alignment over narrow beams for efficient link configuration by traditional standard defined beam selection approaches, which mainly rely on channel state information and beam sweeping through exhaustive searching, imposes computational and communications overheads. And, such resulting overheads limit their potential use in vehicle-to-infrastructure (V2I) and vehicle-to-vehicle (V2V) communications involving highly dynamic scenarios. In comparison, utilizing out-of-band contextual information, such as sensing data obtained from sensor devices, provides a better alternative to reduce overheads. This paper presents a deep learning-based solution for utilizing the multi-modality sensing data for predicting the optimal beams having sufficient mmWave received powers so that the best V2I and V2V line-of-sight links can be ensured proactively. The proposed solution has been tested on real-world measured mmWave sensing and communication data, and the results show that it can achieve up to 98.19% accuracies while predicting top-13 beams. Correspondingly, when compared to existing been sweeping approach, the beam sweeping searching space and time overheads are greatly shortened roughly by 79.67% and 91.89%, respectively which confirm a promising solution for beamforming in mmWave enabled communications.

Zhihan Zeng, Ning Wei, Muhammad Baqer Mollah et al.

Radio maps are important for environment-aware wireless communication, network planning, and radio resource optimization. However, dense radio map construction remains challenging when only a limited number of measurements are available, especially in complex urban environments with strong blockages, irregular geometry, and restricted sensing accessibility. Existing methods have explored interpolation, low-rank cartography, deep completion, and channel knowledge map (CKM) construction, but many of these methods insufficiently exploit explicit geometric priors or overlook the value of predictive uncertainty for subsequent sensing. In this paper, we study sparse gain radio map reconstruction from a geometry-aware and active sensing perspective. We first construct \textbf{UrbanRT-RM}, a controllable ray-tracing benchmark with diverse urban layouts, multiple base-station deployments, and multiple sparse sampling modes. We then propose \textbf{GeoUQ-GFNet}, a lightweight network that jointly predicts a dense gain radio map and a spatial uncertainty map from sparse measurements and structured scene priors. The predicted uncertainty is further used to guide active measurement selection under limited sensing budgets. Extensive experiments show that our proposed GeoUQ-GFNet method achieves strong and consistent reconstruction performance across different scenes and transmitter placements generated using UrbanRT-RM. Moreover, uncertainty-guided querying provides more effective reconstruction improvement than non-adaptive sampling under the same additional measurement budget. These results demonstrate the effectiveness of combining geometry-aware learning, uncertainty estimation, and benchmark-driven evaluation for sparse radio map reconstruction in complex urban environments.

Muhammad Baqer Mollah, Honggang Wang, Hua Fang

Beamforming techniques are utilized in millimeter wave (mmWave) communication to address the inherent path loss limitation, thereby establishing and maintaining reliable connections. However, adopting standard defined beamforming approach in highly dynamic vehicular environments often incurs high beam training overheads and reduces the available airtime for communications, which is mainly due to exchanging pilot signals and exhaustive beam measurements. To this end, we present a multi-modal sensing and fusion learning framework as a potential alternative solution to reduce such overheads. In this framework, we first extract the features individually from the visual and GPS coordinates sensing modalities by modality specific encoders, and subsequently fuse the multimodal features to obtain predicted top-k beams so that the best line-of-sight links can be proactively established. To show the generalizability of the proposed framework, we perform a comprehensive experiment in four different vehicle-to-vehicle (V2V) scenarios from real-world multi-modal sensing and communication dataset. From the experiment, we observe that the proposed framework achieves up to 77.58% accuracy on predicting top-15 beams correctly, outperforms single modalities, incurs roughly as low as 2.32 dB average power loss, and considerably reduces the beam searching space overheads by 76.56% for top-15 beams with respect to standard defined approach.

Muhammad Baqer Mollah, Jun Zhao, Dusit Niyato et al.

Internet of Vehicles (IoV) is an emerging concept that is believed to help realise the vision of intelligent transportation systems (ITS). IoV has become an important research area of impactful applications in recent years due to the rapid advancements in vehicular technologies, high throughput satellite communication, Internet of Things and cyber-physical systems. IoV enables the integration of smart vehicles with the Internet and system components attributing to their environment such as public infrastructures, sensors, computing nodes, pedestrians and other vehicles. By allowing the development of a common information exchange platform between vehicles and heterogeneous vehicular networks, this integration aims to create a better environment and public space to the people as well as to enhance safety for all road users. Being a participatory data exchange and storage, the underlying information exchange platform of IoV needs to be secure, transparent and immutable in order to achieve the intended objectives of ITS. In this connection, the adoption of blockchain as a system platform for supporting the information exchange needs of IoV has been explored. Due to their decentralized and immutable nature, IoV applications enabled by blockchain are believed to have a number of desirable properties such as decentralization, security, transparency, immutability, and automation. In this paper, we present a contemporary survey on the latest advancement in blockchain for IoV. Particularly, we highlight the different application scenarios of IoV after carefully reviewing the recent literatures. We also investigate several key challenges where blockchain is applied in IoV. Furthermore, we present the future opportunities and explore further research directions of IoV as a key enabler of ITS.

Muhammad Baqer Mollah, Jun Zhao, Dusit Niyato et al.

The concept of smart grid has been introduced as a new vision of the conventional power grid to figure out an efficient way of integrating green and renewable energy technologies. In this way, Internet-connected smart grid, also called energy Internet, is also emerging as an innovative approach to ensure the energy from anywhere at any time. The ultimate goal of these developments is to build a sustainable society. However, integrating and coordinating a large number of growing connections can be a challenging issue for the traditional centralized grid system. Consequently, the smart grid is undergoing a transformation to the decentralized topology from its centralized form. On the other hand, blockchain has some excellent features which make it a promising application for smart grid paradigm. In this paper, we aim to provide a comprehensive survey on application of blockchain in smart grid. As such, we identify the significant security challenges of smart grid scenarios that can be addressed by blockchain. Then, we present a number of blockchain-based recent research works presented in different literatures addressing security issues in the area of smart grid. We also summarize several related practical projects, trials, and products that have been emerged recently. Finally, we discuss essential research challenges and future directions of applying blockchain to smart grid security issues.