Hongtao Wang

Hongtao Wang, Jiangshe Zhang, Xiaoli Wei et al.

Picking the first arrival times of prestack gathers is called First Arrival Time (FAT) picking, which is an indispensable step in seismic data processing, and is mainly solved manually in the past. With the current increasing density of seismic data collection, the efficiency of manual picking has been unable to meet the actual needs. Therefore, automatic picking methods have been greatly developed in recent decades, especially those based on deep learning. However, few of the current supervised deep learning-based method can avoid the dependence on labeled samples. Besides, since the gather data is a set of signals which are greatly different from the natural images, it is difficult for the current method to solve the FAT picking problem in case of a low Signal to Noise Ratio (SNR). In this paper, for hard rock seismic gather data, we propose a Multi-Stage Segmentation Pickup Network (MSSPN), which solves the generalization problem across worksites and the picking problem in the case of low SNR. In MSSPN, there are four sub-models to simulate the manually picking processing, which is assumed to four stages from coarse to fine. Experiments on seven field datasets with different qualities show that our MSSPN outperforms benchmarks by a large margin.Particularly, our method can achieve more than 90\% accurate picking across worksites in the case of medium and high SNRs, and even fine-tuned model can achieve 88\% accurate picking of the dataset with low SNR.

H. T. Wang, J. S. Zhang, Z. X. Zhao et al.

Velocity picking, a critical step in seismic data processing, has been studied for decades. Although manual picking can produce accurate normal moveout (NMO) velocities from the velocity spectra of prestack gathers, it is time-consuming and becomes infeasible with the emergence of large amount of seismic data. Numerous automatic velocity picking methods have thus been developed. In recent years, deep learning (DL) methods have produced good results on the seismic data with medium and high signal-to-noise ratios (SNR). Unfortunately, it still lacks a picking method to automatically generate accurate velocities in the situations of low SNR. In this paper, we propose a multi-information fusion network (MIFN) to estimate stacking velocity from the fusion information of velocity spectra and stack gather segments (SGS). In particular, we transform the velocity picking problem into a semantic segmentation problem based on the velocity spectrum images. Meanwhile, the information provided by SGS is used as a prior in the network to assist segmentation. The experimental results on two field datasets show that the picking results of MIFN are stable and accurate for the scenarios with medium and high SNR, and it also performs well in low SNR scenarios.

H. T. Wang, J. S. Zhang, C. X. Zhang et al.

Seismic velocity picking algorithms that are both accurate and efficient can greatly speed up seismic data processing, with the primary approach being the use of velocity spectra. Despite the development of some supervised deep learning-based approaches to automatically pick the velocity, they often come with costly manual labeling expenses or lack interpretability. In comparison, using physical knowledge to drive unsupervised learning techniques has the potential to solve this problem in an efficient manner. We suggest an Unsupervised Ensemble Learning (UEL) approach to achieving a balance between reliance on labeled data and picking accuracy, with the aim of determining the stack velocity. UEL makes use of the data from nearby velocity spectra and other known sources to help pick efficient and reasonable velocity points, which are acquired through a clustering technique. Testing on both the synthetic and field data sets shows that UEL is more reliable and precise in auto-picking than traditional clustering-based techniques and the widely used Convolutional Neural Network (CNN) method.

Hongtao Wang, Li Long, Jiangshe Zhang et al.

Contemporary automatic first break (FB) picking methods typically analyze 1D signals, 2D source gathers, or 3D source-receiver gathers. Utilizing higher-dimensional data, such as 2D or 3D, incorporates global features, improving the stability of local picking. Despite the benefits, high-dimensional data requires structured input and increases computational demands. Addressing this, we propose a novel approach using deep graph learning called DGL-FB, constructing a large graph to efficiently extract information. In this graph, each seismic trace is represented as a node, connected by edges that reflect similarities. To manage the size of the graph, we develop a subgraph sampling technique to streamline model training and inference. Our proposed framework, DGL-FB, leverages deep graph learning for FB picking. It encodes subgraphs into global features using a deep graph encoder. Subsequently, the encoded global features are combined with local node signals and fed into a ResUNet-based 1D segmentation network for FB detection. Field survey evaluations of DGL-FB show superior accuracy and stability compared to a 2D U-Net-based benchmark method.

Hongtao Wang, Jiangshe Zhang, Xiaoli Wei et al.

In seismic exploration, first break (FB) picking is a crucial aspect in the determination of subsurface velocity models, significantly influencing the placement of wells. Many deep neural networks (DNNs)-based automatic picking methods have been proposed to accelerate this processing. Significantly, the segmentation-based DNN methods provide a segmentation map and then estimate FB from the map using a picking threshold. However, the uncertainty of the results picked by DNNs still needs to be analyzed. Thus, the automatic picking methods applied in field datasets can not ensure robustness, especially in the case of a low signal-to-noise ratio (SNR). In this paper, we introduce uncertainty quantification into the FB picking task and propose a novel uncertainty-based picking deep learning network called UPNet. UPNet not only estimates the uncertainty of network output but also can filter the pickings with low confidence. Many experiments evaluate that UPNet exhibits higher accuracy and robustness than the deterministic DNN-based model, achieving State-of-the-Art (SOTA) performance in field surveys. In addition, we verify that the measurement uncertainty is meaningful, which can provide a reference for human decision-making.