Guan Gui

Yu Wang, Guan Gui, Yun Lin et al.

Specific emitter identification (SEI) is a highly potential technology for physical layer authentication that is one of the most critical supplement for the upper-layer authentication. SEI is based on radio frequency (RF) features from circuit difference, rather than cryptography. These features are inherent characteristic of hardware circuits, which difficult to counterfeit. Recently, various deep learning (DL)-based conventional SEI methods have been proposed, and achieved advanced performances. However, these methods are proposed for close-set scenarios with massive RF signal samples for training, and they generally have poor performance under the condition of limited training samples. Thus, we focus on few-shot SEI (FS-SEI) for aircraft identification via automatic dependent surveillance-broadcast (ADS-B) signals, and a novel FS-SEI method is proposed, based on deep metric ensemble learning (DMEL). Specifically, the proposed method consists of feature embedding and classification. The former is based on metric learning with complex-valued convolutional neural network (CVCNN) for extracting discriminative features with compact intra-category distance and separable inter-category distance, while the latter is realized by an ensemble classifier. Simulation results show that if the number of samples per category is more than 5, the average accuracy of our proposed method is higher than 98\%. Moreover, feature visualization demonstrates the advantages of our proposed method in both discriminability and generalization. The codes of this paper can be downloaded from GitHub(https://github.com/BeechburgPieStar/Few-Shot-Specific-Emitter-Identification-via-Deep-Metric-Ensemble-Learning)

Guan Gui, Li Xu, Wentao Ma et al.

Broadband wireless channels usually have the sparse nature. Based on the assumption of Gaussian noise model, adaptive filtering algorithms for reconstruction sparse channels were proposed to take advantage of channel sparsity. However, impulsive noises are often existed in many advance broadband communications systems. These conventional algorithms are vulnerable to deteriorate due to interference of impulsive noise. In this paper, sign least mean square algorithm (SLMS) based robust sparse adaptive filtering algorithms are proposed for estimating channels as well as for mitigating impulsive noise. By using different sparsity-inducing penalty functions, i.e., zero-attracting (ZA), reweighted ZA (RZA), reweighted L1-norm (RL1) and Lp-norm (LP), the proposed SLMS algorithms are termed as SLMS-ZA, SLMS-RZA, LSMS-RL1 and SLMS-LP. Simulation results are given to validate the proposed algorithms.

Guan Gui, Zhen Zhao, Lei Qi et al.

In semi-supervised learning, unlabeled samples can be utilized through augmentation and consistency regularization. However, we observed certain samples, even undergoing strong augmentation, are still correctly classified with high confidence, resulting in a loss close to zero. It indicates that these samples have been already learned well and do not provide any additional optimization benefits to the model. We refer to these samples as ``naive samples". Unfortunately, existing SSL models overlook the characteristics of naive samples, and they just apply the same learning strategy to all samples. To further optimize the SSL model, we emphasize the importance of giving attention to naive samples and augmenting them in a more diverse manner. Sample adaptive augmentation (SAA) is proposed for this stated purpose and consists of two modules: 1) sample selection module; 2) sample augmentation module. Specifically, the sample selection module picks out {naive samples} based on historical training information at each epoch, then the naive samples will be augmented in a more diverse manner in the sample augmentation module. Thanks to the extreme ease of implementation of the above modules, SAA is advantageous for being simple and lightweight. We add SAA on top of FixMatch and FlexMatch respectively, and experiments demonstrate SAA can significantly improve the models. For example, SAA helped improve the accuracy of FixMatch from 92.50% to 94.76% and that of FlexMatch from 95.01% to 95.31% on CIFAR-10 with 40 labels.

Yibin Zhang, Jinlong Sun, Guan Gui et al.

Millimeter wave (mmWave) communication technique has been developed rapidly because of many advantages of high speed, large bandwidth, and ultra-low delay. However, mmWave communications systems suffer from fast fading and frequent blocking. Hence, the ideal communication environment for mmWave is line of sight (LOS) channel. To improve the efficiency and capacity of mmWave system, and to better build the Internet of Everything (IoE) service network, this paper focuses on the channel identification technique in line-of- sight (LOS) and non-LOS (NLOS) environments. Considering the limited computing ability of user equipments (UEs), this paper proposes a novel channel identification architecture based on eigen features, i.e. eigenmatrix and eigenvector (EMEV) of channel state information (CSI). Furthermore, this paper explores clustered delay line (CDL) channel identification with mmWave, which is defined by the 3rd generation partnership project (3GPP). Ther experimental results show that the EMEV based scheme can achieve identification accuracy of 99.88% assuming perfect CSI. In the robustness test, the maximum noise can be tolerated is SNR= 16 dB, with the threshold acc \geq 95%. What is more, the novel architecture based on EMEV feature will reduce the comprehensive overhead by about 90%.

Chen Ye, Guan Gui, Li Xu et al.

In next-generation wireless communications systems, accurate sparse channel estimation (SCE) is required for coherent detection. This paper studies SCE in terms of adaptive filtering theory, which is often termed as adaptive channel estimation (ACE). Theoretically, estimation accuracy could be improved by either exploiting sparsity or adopting suitable error criterion. It motivates us to develop effective adaptive sparse channel estimation (ASCE) methods to improve estimation performance. In our previous research, two ASCE methods have been proposed by combining forth-order error criterion based normalized least mean fourth (NLMF) and L1-norm penalized functions, i.e., zero-attracting NLMF (ZA-NLMF) algorithm and reweighted ZA-NLMF (RZA-NLMF) algorithm. Motivated by compressive sensing theory, an improved ASCE method is proposed by using reweighted L1-norm NLMF (RL1-NLMF) algorithm where RL1 can exploit more sparsity information than ZA and RZA. Specifically, we construct the cost function of RL1-NLMF and hereafter derive its update equation. In addition, intuitive figure is also given to verify that RL1 is more efficient than conventional two sparsity constraints. Finally, simulation results are provided to confirm this study.

Yao Lu, Tengfei Ma, Zeyu Wang et al.

With the rapid development of wireless communications and the growing complexity of digital modulation schemes, traditional manual modulation recognition methods struggle to extract reliable signal features and meet real-time requirements in modern scenarios. Recently, deep learning based Automatic Modulation Recognition (AMR) approaches have greatly improved classification accuracy. However, their large model sizes and high computational demands hinder deployment on resource-constrained devices. Model pruning provides a general approach to reduce model complexity, but existing weight, channel, and layer pruning techniques each present a trade-off between compression rate, hardware acceleration, and accuracy preservation. To this end, in this paper, we introduce FCOS, a novel Fine-to-COarse two-Stage pruning framework that combines channel-level pruning with layer-level collapse diagnosis to achieve extreme compression, high performance and efficient inference. In the first stage of FCOS, hierarchical clustering and parameter fusion are applied to channel weights to achieve channel-level pruning. Then a Layer Collapse Diagnosis (LaCD) module uses linear probing to identify layer collapse and removes the collapsed layers due to high channel compression ratio. Experiments on multiple AMR benchmarks demonstrate that FCOS outperforms existing channel and layer pruning methods. Specifically, FCOS achieves 95.51% FLOPs reduction and 95.31% parameter reduction while still maintaining performance close to the original ResNet56, with only a 0.46% drop in accuracy on Sig2019-12. Code is available at https://github.com/yaolu-zjut/FCOS.

Guan Gui, Peter Zandi, Jacob Taylor et al.

Psychiatric intake is a sequential, high-stakes information-gathering process in which clinicians must decide what to ask, in what order, and how to interpret incomplete or ambiguous responses under limited time. Despite growing interest in conversational AI for healthcare, there is still limited infrastructure for conversational AI in this application. Accordingly, we formulate this task as a question-selection problem with clinically grounded questions, known target information, and controllable patient difficulty. We also introduce a task-specific question-selection benchmark based on a bank of 655 clinician-authored intake questions and corresponding synthetic patient vignettes with 5 different behavioral conditions. In our evaluation, we compare random questioning, a clinical psychiatric intake form baseline, and an LLM-guided adaptive policy across 300 interview sessions spanning four patients and five behavioral conditions. Across the benchmark, the clinically ordered fixed form substantially outperforms random questioning, and the LLM-guided policy achieves the strongest overall recovery. The advantage of adaptation grows sharply under patient behavior that is less amenable to field recovery, especially under guarded-concise conditions. These findings suggest that performance in conversational clinical systems depends not only on language understanding after information is disclosed, but also on whether the system reaches the right topics within a limited interaction budget. More broadly, the benchmark provides a controlled framework for studying how clinical structure and adaptive follow-up contribute to information recovery in interactive clinical machine learning.

Guan Gui, Bin-Bin Gao, Jun Liu et al.

Anomaly detection is a practical and challenging task due to the scarcity of anomaly samples in industrial inspection. Some existing anomaly detection methods address this issue by synthesizing anomalies with noise or external data. However, there is always a large semantic gap between synthetic and real-world anomalies, resulting in weak performance in anomaly detection. To solve the problem, we propose a few-shot Anomaly-driven Generation (AnoGen) method, which guides the diffusion model to generate realistic and diverse anomalies with only a few real anomalies, thereby benefiting training anomaly detection models. Specifically, our work is divided into three stages. In the first stage, we learn the anomaly distribution based on a few given real anomalies and inject the learned knowledge into an embedding. In the second stage, we use the embedding and given bounding boxes to guide the diffusion model to generate realistic and diverse anomalies on specific objects (or textures). In the final stage, we propose a weakly-supervised anomaly detection method to train a more powerful model with generated anomalies. Our method builds upon DRAEM and DesTSeg as the foundation model and conducts experiments on the commonly used industrial anomaly detection dataset, MVTec. The experiments demonstrate that our generated anomalies effectively improve the model performance of both anomaly classification and segmentation tasks simultaneously, \eg, DRAEM and DseTSeg achieved a 5.8\% and 1.5\% improvement in AU-PR metric on segmentation task, respectively. The code and generated anomalous data are available at https://github.com/gaobb/AnoGen.

Yao Lu, Hongyu Gao, Zhuangzhi Chen et al.

Although deep neural networks have made remarkable achievements in the field of automatic modulation recognition (AMR), these models often require a large amount of labeled data for training. However, in many practical scenarios, the available target domain data is scarce and difficult to meet the needs of model training. The most direct way is to collect data manually and perform expert annotation, but the high time and labor costs are unbearable. Another common method is data augmentation. Although it can enrich training samples to a certain extent, it does not introduce new data and therefore cannot fundamentally solve the problem of data scarcity. To address these challenges, we introduce a data expansion framework called Dynamic Uncertainty-driven Sample Expansion (DUSE). Specifically, DUSE uses an uncertainty scoring function to filter out useful samples from relevant AMR datasets and employs an active learning strategy to continuously refine the scorer. Extensive experiments demonstrate that DUSE consistently outperforms 8 coreset selection baselines in both class-balance and class-imbalance settings. Besides, DUSE exhibits strong cross-architecture generalization for unseen models.

Maoyu Wang, Yao Lu, Bo Zhou et al.

With the rapid development of Unmanned Aerial Vehicles (UAVs) and the increasing complexity of low-altitude security threats, traditional UAV identification methods struggle to extract reliable signal features and meet real-time requirements in complex environments. Recently, deep learning based Radio Frequency Fingerprint Identification (RFFI) approaches have greatly improved recognition accuracy. However, their large model sizes and high computational demands hinder deployment on resource-constrained edge devices. While model pruning offers a general solution for complexity reduction, existing weight, channel, and layer pruning techniques struggle to concurrently optimize compression rate, hardware acceleration, and recognition accuracy. To this end, in this paper, we introduce HSCP, a Hierarchical Spectral Clustering Pruning framework that combines layer pruning with channel pruning to achieve extreme compression, high performance, and efficient inference. In the first stage, HSCP employs spectral clustering guided by Centered Kernel Alignment (CKA) to identify and remove redundant layers. Subsequently, the same strategy is applied to the channel dimension to eliminate a finer redundancy. To ensure robustness, we further employ a noise-robust fine-tuning strategy. Experiments on the UAV-M100 benchmark demonstrate that HSCP outperforms existing channel and layer pruning methods. Specifically, HSCP achieves $86.39\%$ parameter reduction and $84.44\%$ FLOPs reduction on ResNet18 while improving accuracy by $1.49\%$ compared to the unpruned baseline, and maintains superior robustness even in low signal-to-noise ratio environments.

Yao Lu, Chunfeng Sun, Dongwei Xu et al.

Deep learning-based Automatic Modulation Recognition (AMR) model has made significant progress with the support of large-scale labeled data. However, when developing new models or performing hyperparameter tuning, the time and energy consumption associated with repeated training using massive amounts of data are often unbearable. To address the above challenges, we propose \emph{FoQuS}, which approximates the effect of full training by selecting a coreset from the original dataset, thereby significantly reducing training overhead. Specifically, \emph{FoQuS} records the prediction trajectory of each sample during full-dataset training and constructs three importance metrics based on training dynamics. Experiments show that \emph{FoQuS} can maintain high recognition accuracy and good cross-architecture generalization on multiple AMR datasets using only 1\%-30\% of the original data.

Maoyu Wang, Yao Lu, Jiaqi Nie et al.

With the rapid development of deep learning, a growing number of pre-trained models have been publicly available. However, deploying these fixed models in real-world IoT applications is challenging because different devices possess heterogeneous computational and memory resources, making it impossible to deploy a single model across all platforms. Although traditional compression methods, such as pruning, quantization, and knowledge distillation, can improve efficiency, they become inflexible once applied and cannot adapt to changing resource constraints. To address these issues, we propose ReStNet, a Reusable and Stitchable Network that dynamically constructs a hybrid network by stitching two pre-trained models together. Implementing ReStNet requires addressing several key challenges, including how to select the optimal stitching points, determine the stitching order of the two pre-trained models, and choose an effective fine-tuning strategy. To systematically address these challenges and adapt to varying resource constraints, ReStNet determines the stitching point by calculating layer-wise similarity via Centered Kernel Alignment (CKA). It then constructs the hybrid model by retaining early layers from a larger-capacity model and appending deeper layers from a smaller one. To facilitate efficient deployment, only the stitching layer is fine-tuned. This design enables rapid adaptation to changing budgets while fully leveraging available resources. Moreover, ReStNet supports both homogeneous (CNN-CNN, Transformer-Transformer) and heterogeneous (CNN-Transformer) stitching, allowing to combine different model families flexibly. Extensive experiments on multiple benchmarks demonstrate that ReStNet achieve flexible accuracy-efficiency trade-offs at runtime while significantly reducing training cost.

Yunyi Li, Yiqiu Jiang, Hengmin Zhang et al.

Compressive sensing (CS) based computed tomography (CT) image reconstruction aims at reducing the radiation risk through sparse-view projection data. It is usually challenging to achieve satisfying image quality from incomplete projections. Recently, the nonconvex ${L_ {1/2}} $-norm has achieved promising performance in sparse recovery, while the applications on imaging are unsatisfactory due to its nonconvexity. In this paper, we develop a ${L_ {1/2}} $-regularized nonlocal self-similarity (NSS) denoiser for CT reconstruction problem, which integrates low-rank approximation with group sparse coding (GSC) framework. Concretely, we first split the CT reconstruction problem into two subproblems, and then improve the CT image quality furtherly using our ${L_ {1/2}} $-regularized NSS denoiser. Instead of optimizing the nonconvex problem under the perspective of GSC, we particularly reconstruct CT image via low-rank minimization based on two simple yet essential schemes, which build the equivalent relationship between GSC based denoiser and low-rank minimization. Furtherly, the weighted singular value thresholding (WSVT) operator is utilized to optimize the resulting nonconvex ${L_ {1/2}} $ minimization problem. Following this, our proposed denoiser is integrated with the CT reconstruction problem by alternating direction method of multipliers (ADMM) framework. Extensive experimental results on typical clinical CT images have demonstrated that our approach can further achieve better performance than popular approaches.

Yunyi Li, Li Liu, Yu Zhao et al.

Group sparse representation (GSR) based method has led to great successes in various image recovery tasks, which can be converted into a low-rank matrix minimization problem. As a widely used surrogate function of low-rank, the nuclear norm based convex surrogate usually leads to over-shrinking problem, since the standard soft-thresholding operator shrinks all singular values equally. To improve traditional sparse representation based image compressive sensing (CS) performance, we propose a generalized CS framework based on GSR model, which leads to a nonconvex nonsmooth low-rank minimization problem. The popular L_2-norm and M-estimator are employed for standard image CS and robust CS problem to fit the data respectively. For the better approximation of the rank of group-matrix, a family of nuclear norms are employed to address the over-shrinking problem. Moreover, we also propose a flexible and effective iteratively-weighting strategy to control the weighting and contribution of each singular value. Then we develop an iteratively reweighted nuclear norm algorithm for our generalized framework via an alternating direction method of multipliers framework, namely, GSR-AIR. Experimental results demonstrate that our proposed CS framework can achieve favorable reconstruction performance compared with current state-of-the-art methods and the robust CS framework can suppress the outliers effectively.

Yunyi Li, Guan Gui, Xiefeng Cheng

Recently, low-rank matrix recovery theory has been emerging as a significant progress for various image processing problems. Meanwhile, the group sparse coding (GSC) theory has led to great successes in image restoration (IR) problem with each group contains low-rank property. In this paper, we propose a novel low-rank minimization based denoising model for IR tasks under the perspective of GSC, an important connection between our denoising model and rank minimization problem has been put forward. To overcome the bias problem caused by convex nuclear norm minimization (NNM) for rank approximation, a more generalized and flexible rank relaxation function is employed, namely weighted nonconvex relaxation. Accordingly, an efficient iteratively-reweighted algorithm is proposed to handle the resulting minimization problem combing with the popular L_(1/2) and L_(2/3) thresholding operators. Finally, our proposed denoising model is applied to IR problems via an alternating direction method of multipliers (ADMM) strategy. Typical IR experiments on image compressive sensing (CS), inpainting, deblurring and impulsive noise removal demonstrate that our proposed method can achieve significantly higher PSNR/FSIM values than many relevant state-of-the-art methods.

Hongji Huang, Song Guo, Guan Gui et al.

The new demands for high-reliability and ultra-high capacity wireless communication have led to extensive research into 5G communications. However, the current communication systems, which were designed on the basis of conventional communication theories, signficantly restrict further performance improvements and lead to severe limitations. Recently, the emerging deep learning techniques have been recognized as a promising tool for handling the complicated communication systems, and their potential for optimizing wireless communications has been demonstrated. In this article, we first review the development of deep learning solutions for 5G communication, and then propose efficient schemes for deep learning-based 5G scenarios. Specifically, the key ideas for several important deep learningbased communication methods are presented along with the research opportunities and challenges. In particular, novel communication frameworks of non-orthogonal multiple access (NOMA), massive multiple-input multiple-output (MIMO), and millimeter wave (mmWave) are investigated, and their superior performances are demonstrated. We vision that the appealing deep learning-based wireless physical layer frameworks will bring a new direction in communication theories and that this work will move us forward along this road.

Simin Wan, Feng Shu, Jinhui Lu et al.

In this paper, given the beamforming vector of confidential messages and artificial noise (AN) projection matrix and total power constraint, a power allocation (PA) strategy of maximizing secrecy rate (Max-SR) is proposed for secure directional modulation (DM) networks. By the method of Lagrange multiplier, the analytic expression of the proposed PA strategy is derived. To confirm the benefit from the Max-SR-based PA strategy, we take the null-space projection (NSP) beamforming scheme as an example and derive its closed-form expression of optimal PA strategy. From simulation results, we find the following facts: in the medium and high signal-to-noise-ratio (SNR) regions, compared with three typical PA parameters such $β=0.1, 0.5$, and $0.9$, the optimal PA shows a substantial SR performance gain with maximum gain percent up to more than $60\%$. Additionally, as the PA factor increases from 0 to 1, the achievable SR increases accordingly in the low SNR region whereas it first increases and then decreases in the medium and high SNR regions, where the SR can be approximately viewed as a convex function of the PA factor. Finally, as the number of antennas increases, the optimal PA factor becomes large and tends to one in the medium and high SNR region. In other words, the contribution of AN to SR can be trivial in such a situation.

Beiyi Liu, Guan Gui, Li Xu

Least mean square (LMS) type adaptive algorithms have attracted much attention due to their low computational complexity. In the scenarios of sparse channel estimation, zero-attracting LMS (ZA-LMS), reweighted ZA-LMS (RZA-LMS) and reweighted -norm LMS (RL1-LMS) have been proposed to exploit channel sparsity. However, these proposed algorithms may hard to make tradeoff between convergence speed and estimation performance with only one step-size. To solve this problem, we propose three sparse iterative-promoting variable step-size LMS (IP-VSS-LMS) algorithms with sparse constraints, i.e. ZA, RZA and RL1. These proposed algorithms are termed as ZA-IPVSS-LMS, RZA-IPVSS-LMS and RL1-IPVSS-LMS respectively. Simulation results are provided to confirm effectiveness of the proposed sparse channel estimation algorithms.