Po-Heng Chou

Po-Heng Chou, Da-Chih Lin, Hung-Yu Wei et al.

In this paper, a measurement-driven framework is proposed for early radio link failure (RLF) prediction in 5G non-standalone (NSA) railway environments. Using 10 Hz metro-train traces with serving and neighbor-cell indicators, we benchmark six models, namely CNN, LSTM, XGBoost, Anomaly Transformer, PatchTST, and TimesNet, under varied observation windows and prediction horizons. When the observation window is three seconds, TimesNet attains the highest F1 score with a three-second prediction horizon, while CNN provides a favorable accuracy-latency tradeoff with a two-second horizon, enabling proactive actions such as redundancy and adaptive handovers. The results indicate that deep temporal models can anticipate reliability degradations several seconds in advance using lightweight features available on commercial devices, offering a practical path to early-warning control in 5G-based railway systems.

Po-Heng Chou, Chiapin Wang, Shou-Yu Chen et al.

In this paper, we propose a spatial-temporal learning-based distributed routing framework for dynamic Low Earth Orbit (LEO) satellite networks, where graph attention networks (GAT) and long short-term memory (LSTM) are integrated within a deep Q-network (DQN)-based architecture to enable distributed and adaptive routing decisions based on local observations. The routing problem is formulated as a partially observable Markov decision process (POMDP) to address partial observability under dynamic topology and time-varying traffic. Simulation results show that the proposed method significantly outperforms conventional and learning-based routing schemes in terms of throughput, packet loss, queue length, and end-to-end delay, while achieving proactive congestion avoidance with up to 23.26% queue reduction. In addition, the proposed approach maintains low computational overhead with negligible carbon emissions, demonstrating its efficiency from a Green AI perspective.

Po-Heng Chou, Jia-Qing Lin, Wan-Jen Huang et al.

In this paper, we propose a feedback-efficient hybrid precoding framework for wideband millimeter-wave (mmWave) multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) systems. To mitigate the high cost of radio frequency (RF) chains and channel state information (CSI) feedback in large-scale antenna arrays, we first construct frequency-flat analog precoders by extracting dominant angle-of-arrival (AoA) and angle-of-departure (AoD) directions from sparse frequency-domain channels. For digital precoding, we design a quantized codebook using the Lloyd algorithm and develop a binary-search-based hierarchical interpolation algorithm that adaptively assigns codewords according to subcarrier correlation. The proposed method achieves sub-linear feedback scaling by reducing the feedback overhead from O(K) to O(K/M + log M), where K is the number of subcarriers and M is the pilot spacing. Simulation results demonstrate that the proposed method achieves comparable or superior spectral efficiency and bit error rate (BER) performance to existing clustering and interpolation schemes, while significantly reducing computational complexity and exhibiting robustness under imperfect CSI.

Po-Heng Chou, Chiapin Wang, Chung-Chi Huang et al.

In this paper, we propose a dueling double deep Q-network (DDQN)-based adaptive multi-objective handover framework for LEO satellite networks. The proposed method enables dynamic trade-off learning among throughput, blocking probability, and switching cost under time-varying network conditions. Simulation results demonstrate that the proposed approach consistently outperforms conventional baselines, achieving up to 10.3% throughput improvement and near-zero blocking under typical operating conditions.

Po-Heng Chou, Yi-Fang Yu, Shou-Yu Chen et al.

The coexistence of NR-U and Wi-Fi in unlicensed spectrum introduces a system-level resource coordination problem, where heterogeneous channel access mechanisms lead to a significant imbalance in spectrum utilization and degraded Wi-Fi performance. To address this challenge, we propose a policy-driven deep reinforcement learning (DRL) framework for adaptive TXOP control, in which the coexistence process is formulated as a Markov decision process (MDP) and a deep Q-network (DQN) learns control policies through online interaction. A key contribution is the introduction of a policy layer via reward design, enabling explicit control of system-level tradeoffs among fairness, throughput, and quality of service (QoS). Three policies, namely absolute fairness, moderate fairness, and utility-based fairness, are developed to achieve different operating points. Simulation results show that the proposed framework achieves a Jain fairness index above 0.9 under strict fairness control. Compared to absolute fairness, moderate fairness improves aggregate throughput by 68.22%, while the utility-based policy further enhances utility by 177.6%. These results demonstrate that policy-driven control provides a flexible and effective solution for managing tradeoffs in heterogeneous coexistence networks.

Wei-Lung Mao, Chun-Chi Wang, Po-Heng Chou et al.

Since the defect detection of conventional industry components is time-consuming and labor-intensive, it leads to a significant burden on quality inspection personnel and makes it difficult to manage product quality. In this paper, we propose an automated defect detection system for the dual in-line package (DIP) that is widely used in industry, using digital camera optics and a deep learning (DL)-based model. The two most common defect categories of DIP are examined: (1) surface defects, and (2) pin-leg defects. However, the lack of defective component images leads to a challenge for detection tasks. To solve this problem, the ConSinGAN is used to generate a suitable-sized dataset for training and testing. Four varieties of the YOLO model are investigated (v3, v4, v7, and v9), both in isolation and with the ConSinGAN augmentation. The proposed YOLOv7 with ConSinGAN is superior to the other YOLO versions in accuracy of 95.50\%, detection time of 285 ms, and is far superior to threshold-based approaches. In addition, the supervisory control and data acquisition (SCADA) system is developed, and the associated sensor architecture is described. The proposed automated defect detection can be easily established with numerous types of defects or insufficient defect data.

Ying-Ren Chien, Po-Heng Chou, You-Jie Peng et al.

To effectively process impulse noise for narrowband powerline communications (NB-PLCs) transceivers, capturing comprehensive statistics of nonperiodic asynchronous impulsive noise (APIN) is a critical task. However, existing mathematical noise generative models only capture part of the characteristics of noise. In this study, we propose a novel generative adversarial network (GAN) called noise generation GAN (NGGAN) that learns the complicated characteristics of practically measured noise samples for data synthesis. To closely match the statistics of complicated noise over the NB-PLC systems, we measured the NB-PLC noise via the analog coupling and bandpass filtering circuits of a commercial NB-PLC modem to build a realistic dataset. To train NGGAN, we adhere to the following principles: 1) we design the length of input signals that the NGGAN model can fit to facilitate cyclostationary noise generation; 2) the Wasserstein distance is used as a loss function to enhance the similarity between the generated noise and training data; and 3) to measure the similarity performances of GAN-based models based on the mathematical and practically measured datasets, we conduct both quantitative and qualitative analyses. The training datasets include: 1) a piecewise spectral cyclostationary Gaussian model (PSCGM); 2) a frequency-shift (FRESH) filter; and 3) practical measurements from NB-PLC systems. Simulation results demonstrate that the generated noise samples from the proposed NGGAN are highly close to the real noise samples. The principal component analysis (PCA) scatter plots and Fréchet inception distance (FID) analysis have shown that NGGAN outperforms other GAN-based models by generating noise samples with superior fidelity and higher diversity.

Po-Heng Chou, Chiapin Wang, Kuan-Hao Chen et al.

In this paper, we propose a reinforcement learning based beam weighting framework that couples a policy network with an augmented weighted least squares (WLS) estimator for accurate and low-complexity positioning in multi-beam LEO constellations. Unlike conventional geometry or CSI-dependent approaches, the policy learns directly from uplink pilot responses and geometry features, enabling robust localization without explicit CSI estimation. An augmented WLS jointly estimates position and receiver clock bias, improving numerical stability under dynamic beam geometry. Across representative scenarios, the proposed method reduces the mean positioning error by 99.3% compared with the geometry-based baseline, achieving 0.395 m RMSE with near real-time inference.

Po-Heng Chou, Bo-Ren Zheng, Wan-Jen Huang et al.

This study considers multiple reconfigurable intelligent surfaces (RISs)-aided multiuser downlink systems with the goal of jointly optimizing the transmitter precoding and RIS phase shift matrix to maximize spectrum efficiency. Unlike prior work that assumed ideal RIS reflectivity, a practical coupling effect is considered between reflecting amplitude and phase shift for the RIS elements. This makes the optimization problem non-convex. To address this challenge, we propose a deep deterministic policy gradient (DDPG)-based deep reinforcement learning (DRL) framework. The proposed model is evaluated under both fixed and random numbers of users in practical mmWave channel settings. Simulation results demonstrate that, despite its complexity, the proposed DDPG approach significantly outperforms optimization-based algorithms and double deep Q-learning, particularly in scenarios with random user distributions.

Po-Heng Chou, Chun-Chi Wang, Wei-Lung Mao

In this paper, we propose a YOLO-based deep learning (DL) model for automatic defect detection to solve the time-consuming and labor-intensive tasks in industrial manufacturing. In our experiments, the images of metal sheets are used as the dataset for training the YOLO model to detect the defects on the surfaces and in the holes of metal sheets. However, the lack of metal sheet images significantly degrades the performance of detection accuracy. To address this issue, the ConSinGAN is used to generate a considerable amount of data. Four versions of the YOLO model (i.e., YOLOv3, v4, v7, and v9) are combined with the ConSinGAN for data augmentation. The proposed YOLOv9 model with ConSinGAN outperforms the other YOLO models with an accuracy of 91.3%, and a detection time of 146 ms. The proposed YOLOv9 model is integrated into manufacturing hardware and a supervisory control and data acquisition (SCADA) system to establish a practical automated optical inspection (AOI) system. Additionally, the proposed automated defect detection is easily applied to other components in industrial manufacturing.

Wei-Lung Mao, Chun-Chi Wang, Po-Heng Chou et al.

The rising aging population has increased the importance of fall detection (FD) systems as an assistive technology, where deep learning techniques are widely applied to enhance accuracy. FD systems typically use edge devices (EDs) worn by individuals to collect real-time data, which are transmitted to a cloud center (CC) or processed locally. However, this architecture faces challenges such as a limited ED model size and data transmission latency to the CC. Mobile edge computing (MEC), which allows computations at MEC servers deployed between EDs and CC, has been explored to address these challenges. We propose a multilayer MEC (MLMEC) framework to balance accuracy and latency. The MLMEC splits the architecture into stations, each with a neural network model. If front-end equipment cannot detect falls reliably, data are transmitted to a station with more robust back-end computing. The knowledge distillation (KD) approach was employed to improve front-end detection accuracy by allowing high-power back-end stations to provide additional learning experiences, enhancing precision while reducing latency and processing loads. Simulation results demonstrate that the KD approach improved accuracy by 11.65% on the SisFall dataset and 2.78% on the FallAllD dataset. The MLMEC with KD also reduced the data latency rate by 54.15% on the FallAllD dataset and 46.67% on the SisFall dataset compared to the MLMEC without KD. In summary, the MLMEC FD system exhibits improved accuracy and reduced latency.

Chun-Yuan Huang, Po-Heng Chou, Wan-Jen Huang et al.

In this paper, we propose Capacity-Net, a novel unsupervised learning approach aimed at maximizing the achievable rate in reflecting intelligent surface (RIS)-aided millimeter-wave (mmWave) multiple input multiple output (MIMO) systems. To combat severe channel fading of the mmWave spectrum, we optimize the phase-shifting factors of the reflective elements in the RIS to enhance the achievable rate. However, most optimization algorithms rely heavily on complete and accurate channel state information (CSI), which is often challenging to acquire since the RIS is mostly composed of passive components. To circumvent this challenge, we leverage unsupervised learning techniques with implicit CSI provided by the received pilot signals. Specifically, it usually requires perfect CSI to evaluate the achievable rate as a performance metric of the current optimization result of the unsupervised learning method. Instead of channel estimation, the Capacity-Net is proposed to establish a mapping among the received pilot signals, optimized RIS phase shifts, and the resultant achievable rates. Simulation results demonstrate the superiority of the proposed Capacity-Net-based unsupervised learning approach over learning methods based on traditional channel estimation.

Po-Heng Chou, Ching-Wen Chen, Wan-Jen Huang et al.

In this paper, the precoding design is investigated for maximizing the throughput of millimeter wave (mmWave) multiple-input multiple-output (MIMO) systems with obstructed direct communication paths. In particular, a reconfigurable intelligent surface (RIS) is employed to enhance MIMO transmissions, considering mmWave characteristics related to line-of-sight (LoS) and multipath effects. The traditional exhaustive search (ES) for optimal codewords in the continuous phase shift is computationally intensive and time-consuming. To reduce computational complexity, permuted discrete Fourier transform (DFT) vectors are used for finding codebook design, incorporating amplitude responses for practical or ideal RIS systems. However, even if the discrete phase shift is adopted in the ES, it results in significant computation and is time-consuming. Instead, the trained deep neural network (DNN) is developed to facilitate faster codeword selection. Simulation results show that the DNN maintains sub-optimal spectral efficiency even as the distance between the end-user and the RIS has variations in the testing phase. These results highlight the potential of DNN in advancing RIS-aided systems.

Po-Heng Chou, Jiun-Jia Wu, Wan-Jen Huang et al.

In this paper, we propose a sustainable long short-term memory (LSTM)-based precoding framework for reconfigurable intelligent surface (RIS)-assisted millimeter-wave (mmWave) MIMO systems. Instead of explicit channel state information (CSI) estimation, the framework exploits uplink pilot sequences to implicitly learn channel characteristics, reducing both pilot overhead and inference complexity. Practical hardware constraints are addressed by incorporating the phase-dependent amplitude model of RIS elements, while a multi-label training strategy improves robustness when multiple near-optimal codewords yield comparable performance. Simulations show that the proposed design achieves over 90% of the spectral efficiency of exhaustive search (ES) with only 2.2% of its computation time, cutting energy consumption by nearly two orders of magnitude. The method also demonstrates resilience under distribution mismatch and scalability to larger RIS arrays, making it a practical and energy-efficient solution for sustainable 6G wireless networks.

Yu-Hsiang Huang, Po-Heng Chou, Wan-Jen Huang et al.

In this paper, a green learning (GL)-based precoding framework is proposed for simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS)-aided millimeter-wave (mmWave) MIMO broadcasting systems. Motivated by the growing emphasis on environmental sustainability in future 6G networks, this work adopts a broadcasting transmission architecture for scenarios where multiple users share identical information, improving spectral efficiency and reducing redundant transmissions and power consumption. Different from conventional optimization methods, such as block coordinate descent (BCD) that require perfect channel state information (CSI) and iterative computation, the proposed GL framework operates directly on received uplink pilot signals without explicit CSI estimation. Unlike deep learning (DL) approaches that require CSI-based labels for training, the proposed GL approach also avoids deep neural networks and backpropagation, leading to a more lightweight design. Although the proposed GL framework is trained with supervision generated by BCD under full CSI, inference is performed in a fully CSI-free manner. The proposed GL integrates subspace approximation with adjusted bias (Saab), relevant feature test (RFT)-based supervised feature selection, and eXtreme gradient boosting (XGBoost)-based decision learning to jointly predict the STAR-RIS coefficients and transmit precoder. Simulation results show that the proposed GL approach achieves competitive spectral efficiency compared to BCD and DL-based models, while reducing floating-point operations (FLOPs) by over four orders of magnitude. These advantages make the proposed GL approach highly suitable for real-time deployment in energy- and hardware-constrained broadcasting scenarios.

Po-Heng Chou, Pin-Qi Fu, Walid Saad et al.

In this paper, we present an agentic double deep Q-network (DDQN) scheduler for licensed/unlicensed band allocation in New Radio (NR) sidelink (SL) networks. Beyond conventional reward-seeking reinforcement learning (RL), the agent perceives and reasons over a multi-dimensional context that jointly captures queueing delay, link quality, coexistence intensity, and switching stability. A capacity-aware, quality of service (QoS)-constrained reward aligns the agent with goal-oriented scheduling rather than static thresholding. Under constrained bandwidth, the proposed design reduces blocking by up to 87.5% versus threshold policies while preserving throughput, highlighting the value of context-driven decisions in coexistence-limited NR SL networks. The proposed scheduler is an embodied agent (E-agent) tailored for task-specific, resource-efficient operation at the network edge.

Po-Heng Chou, Wei-Lung Mao, Ru-Ping Lin

This letter proposes a YOLO-based framework for spatial bearing fault diagnosis using time-frequency spectrograms derived from continuous wavelet transform (CWT). One-dimensional vibration signals are first transformed into time-frequency spectrograms using Morlet wavelets to capture transient fault signatures. These spectrograms are then processed by YOLOv9, v10, and v11 models to classify fault types. Evaluated on three benchmark datasets, including Case Western Reserve University (CWRU), Paderborn University (PU), and Intelligent Maintenance System (IMS), the proposed CWT-YOLO pipeline achieves significantly higher accuracy and generalizability than the baseline MCNN-LSTM model. Notably, YOLOv11 reaches mAP scores of 99.4% (CWRU), 97.8% (PU), and 99.5% (IMS). In addition, its region-aware detection mechanism enables direct visualization of fault locations in spectrograms, offering a practical solution for condition monitoring in rotating machinery.