Diego Rodríguez

Grzegorz Ficht, Hafez Farazi, André Brandenburger et al.

Humanoid robotics research depends on capable robot platforms, but recently developed advanced platforms are often not available to other research groups, expensive, dangerous to operate, or closed-source. The lack of available platforms forces researchers to work with smaller robots, which have less strict dynamic constraints or with simulations, which lack many real-world effects. We developed NimbRo-OP2X to address this need. At a height of 135 cm our robot is large enough to interact in a human environment. Its low weight of only 19 kg makes the operation of the robot safe and easy, as no special operational equipment is necessary. Our robot is equipped with a fast onboard computer and a GPU to accelerate parallel computations. We extend our already open-source software by a deep-learning based vision system and gait parameter optimisation. The NimbRo-OP2X was evaluated during RoboCup 2018 in Montréal, Canada, where it won all possible awards in the Humanoid AdultSize class.

Diego Rodriguez, Sven Behnke

Bipedal walking is one of the most difficult but exciting challenges in robotics. The difficulties arise from the complexity of high-dimensional dynamics, sensing and actuation limitations combined with real-time and computational constraints. Deep Reinforcement Learning (DRL) holds the promise to address these issues by fully exploiting the robot dynamics with minimal craftsmanship. In this paper, we propose a novel DRL approach that enables an agent to learn omnidirectional locomotion for humanoid (bipedal) robots. Notably, the locomotion behaviors are accomplished by a single control policy (a single neural network). We achieve this by introducing a new curriculum learning method that gradually increases the task difficulty by scheduling target velocities. In addition, our method does not require reference motions which facilities its application to robots with different kinematics, and reduces the overall complexity. Finally, different strategies for sim-to-real transfer are presented which allow us to transfer the learned policy to a real humanoid robot.

Diego Rodriguez, Florian Huber, Sven Behnke

In this paper, we propose a novel approach to solve the 3D non-rigid registration problem from RGB images using Convolutional Neural Networks (CNNs). Our objective is to find a deformation field (typically used for transferring knowledge between instances, e.g., grasping skills) that warps a given 3D canonical model into a novel instance observed by a single-view RGB image. This is done by training a CNN that infers a deformation field for the visible parts of the canonical model and by employing a learned shape (latent) space for inferring the deformations of the occluded parts. As result of the registration, the observed model is reconstructed. Because our method does not need depth information, it can register objects that are typically hard to perceive with RGB-D sensors, e.g. with transparent or shiny surfaces. Even without depth data, our approach outperforms the Coherent Point Drift (CPD) registration method for the evaluated object categories.

Hafez Farazi, Grzegorz Ficht, Philipp Allgeuer et al.

Over the past few years, the Humanoid League rules have changed towards more realistic and challenging game environments, which encourage teams to advance their robot soccer performances. In this paper, we present the software and hardware designs that led our team NimbRo to win the competitions in the AdultSize league -- including the soccer tournament, the drop-in games, and the technical challenges at RoboCup 2018 in Montreal. Altogether, this resulted in NimbRo winning the Best Humanoid Award. In particular, we describe our deep-learning approaches for visual perception and our new fully 3D printed robot NimbRo-OP2X.

Dmytro Pavlichenko, Diego Rodriguez, Max Schwarz et al.

Autonomous dual-arm manipulation is an essential skill to deploy robots in unstructured scenarios. However, this is a challenging undertaking, particularly in terms of perception and planning. Unstructured scenarios are full of objects with different shapes and appearances that have to be grasped in a very specific manner so they can be functionally used. In this paper we present an integrated approach to perform dual-arm pick tasks autonomously. Our method consists of semantic segmentation, object pose estimation, deformable model registration, grasp planning and arm trajectory optimization. The entire pipeline can be executed on-board and is suitable for on-line grasping scenarios. For this, our approach makes use of accumulated knowledge expressed as convolutional neural network models and low-dimensional latent shape spaces. For manipulating objects, we propose a stochastic trajectory optimization that includes a kinematic chain closure constraint. Evaluation in simulation and on the real robot corroborates the feasibility and applicability of the proposed methods on a task of picking up unknown watering cans and drills using both arms.

Diego Rodriguez, Antonio Di Guardo, Antonio Frisoli et al.

Every time a person encounters an object with a given degree of familiarity, he/she immediately knows how to grasp it. Adaptation of the movement of the hand according to the object geometry happens effortlessly because of the accumulated knowledge of previous experiences grasping similar objects. In this paper, we present a novel method for inferring grasp configurations based on the object shape. Grasping knowledge is gathered in a synergy space of the robotic hand built by following a human grasping taxonomy. The synergy space is constructed through human demonstrations employing a exoskeleton that provides force feedback, which provides the advantage of evaluating the quality of the grasp. The shape descriptor is obtained by means of a categorical non-rigid registration that encodes typical intra-class variations. This approach is especially suitable for on-line scenarios where only a portion of the object's surface is observable. This method is demonstrated through simulation and real robot experiments by grasping objects never seen before by the robot.

Max Schwarz, David Droeschel, Christian Lenz et al.

The Mohamed Bin Zayed International Robotics Challenge (MBZIRC) 2017 has defined ambitious new benchmarks to advance the state-of-the-art in autonomous operation of ground-based and flying robots. In this article, we describe our winning entry to MBZIRC Challenge 2: the mobile manipulation robot Mario. It is capable of autonomously solving a valve manipulation task using a wrench tool detected, grasped, and finally employed to turn a valve stem. Mario's omnidirectional base allows both fast locomotion and precise close approach to the manipulation panel. We describe an efficient detector for medium-sized objects in 3D laser scans and apply it to detect the manipulation panel. An object detection architecture based on deep neural networks is used to find and select the correct tool from grayscale images. Parametrized motion primitives are adapted online to percepts of the tool and valve stem in order to turn the stem. We report in detail on our winning performance at the challenge and discuss lessons learned.

Diego Rodriguez, Hafez Farazi, Philipp Allgeuer et al.

In order to pursue the vision of the RoboCup Humanoid League of beating the soccer world champion by 2050, new rules and competitions are added or modified each year fostering novel technological advances. In 2017, the number of players in the TeenSize class soccer games was increase to 3 vs. 3, which allowed for more team play strategies. Improvements in individual skills were also demanded through a set of technical challenges. This paper presents the latest individual skills and team play developments used in RoboCup 2017 that lead our team Nimbro winning the 2017 TeenSize soccer tournament, the technical challenges, and the drop-in games.

Diego Rodriguez, Corbin Cogswell, Seongyong Koo et al.

Robots acting in open environments need to be able to handle novel objects. Based on the observation that objects within a category are often similar in their shapes and usage, we propose an approach for transferring grasping skills from known instances to novel instances of an object category. Correspondences between the instances are established by means of a non-rigid registration method that combines the Coherent Point Drift approach with subspace methods. The known object instances are modeled using a canonical shape and a transformation which deforms it to match the instance shape. The principle axes of variation of these deformations define a low-dimensional latent space. New instances can be generated through interpolation and extrapolation in this shape space. For inferring the shape parameters of an unknown instance, an energy function expressed in terms of the latent variables is minimized. Due to the class-level knowledge of the object, our method is able to complete novel shapes from partial views. Control poses for generating grasping motions are transferred efficiently to novel instances by the estimated non-rigid transformation.

Grzegorz Ficht, Dmytro Pavlichenko, Philipp Allgeuer et al.

The ongoing evolution of the RoboCup Humanoid League led in 2017 to the introduction of one vs. one soccer games for the AdultSize robots, which motived our team NimbRo to enter this category. In this paper, we present the mechatronic design of our upgraded robot Copedo and the newly developed NimbRo-OP2, which received the RoboCup Design Award. We also describe improved approaches to visual perception of the game situation, including compassless localization on a soccer field with symmetric appearance, and the generation of soccer behaviors. At RoboCup 2017 in Nagoya, our robots played very well, winning the AdultSize soccer tournament with high scores. Our robots also won the technical challenges and we present the developed solutions.