Giovanni Pollo

Lorenzo Ruotolo, Giovanni Pollo, Mohamed Amine Hamdi et al.

The growing complexity of cyber-physical systems (CPSs) calls for early prototyping tools that combine accuracy, speed, and usability. Virtual Platforms (VPs) provide fast functional simulation, but hybrid co-emulation solutions, in which key digital components are deployed on FPGA, become necessary when accurate timing modelling is required and RTL simulation is too costly. However, existing hybrid emulation tools are mostly proprietary, and rely on vendor-specific FPGA features. To address this gap, we introduce an open-source framework that connects SystemC-based VPs with FPGA emulation, enabling full-system co-emulation of digital and non-digital components. The FPGA accelerates the execution of main digital subsystems, while a wrapper coordinates timing and communication with the VP through JTAG, maintaining synchronization with simulated peripherals. Evaluations using a RISC-V SoC, with an example in the biosignals processing domain, show up to 2500x speedup compared to RTL simulation, while maintaining less than 2x total simulation time relative to pure FPGA emulation.

Alessio Burrello, Francesco Carlucci, Giovanni Pollo et al.

PPG-based Blood Pressure (BP) estimation is a challenging biosignal processing task for low-power devices such as wearables. State-of-the-art Deep Neural Networks (DNNs) trained for this task implement either a PPG-to-BP signal-to-signal reconstruction or a scalar BP value regression and have been shown to outperform classic methods on the largest and most complex public datasets. However, these models often require excessive parameter storage or computational effort for wearable deployment, exceeding the available memory or incurring too high latency and energy consumption. In this work, we describe a fully-automated DNN design pipeline, encompassing HW-aware Neural Architecture Search (NAS) and Quantization, thanks to which we derive accurate yet lightweight models, that can be deployed on an ultra-low-power multicore System-on-Chip (SoC), GAP8. Starting from both regression and signal-to-signal state-of-the-art models on four public datasets, we obtain optimized versions that achieve up to 4.99% lower error or 73.36% lower size at iso-error. Noteworthy, while the most accurate SoA network on the largest dataset can not fit the GAP8 memory, all our optimized models can; our most accurate DNN consumes as little as 0.37 mJ while reaching the lowest MAE of 8.08 on Diastolic BP estimation.

Francesco Carlucci, Giovanni Pollo, Xiaying Wang et al.

Photoplethysmography (PPG)-based blood pressure (BP) estimation is a challenging task, particularly on resource-constrained wearable devices. However, fully on-board processing is desirable to ensure user data confidentiality. Recent deep neural networks (DNNs) have achieved high BP estimation accuracy by reconstructing BP waveforms or directly regressing BP values, but their large memory, computation, and energy requirements hinder deployment on wearables. This work introduces a fully automated DNN design pipeline that combines hardware-aware neural architecture search (NAS), pruning, and mixed-precision search (MPS) to generate accurate yet compact BP prediction models optimized for ultra-low-power multicore systems-on-chip (SoCs). Starting from state-of-the-art baseline models on four public datasets, our optimized networks achieve up to 7.99% lower error with a 7.5x parameter reduction, or up to 83x fewer parameters with negligible accuracy loss. All models fit within 512 kB of memory on our target SoC (GreenWaves' GAP8), requiring less than 55 kB and achieving an average inference latency of 142 ms and energy consumption of 7.25 mJ. Patient-specific fine-tuning further improves accuracy by up to 64%, enabling fully autonomous, low-cost BP monitoring on wearables.

Andrei Mihai Albu, Giovanni Pollo, Alessio Burrello et al.

The growing complexity of cyber-physical systems, particularly in automotive applications, has increased the demand for efficient modeling and cross-domain co-simulation techniques. While SystemC Transaction-Level Modeling (TLM) enables effective hardware/software co-design, its limited interoperability with models from other engineering domains poses integration challenges. This paper presents a fully open-source methodology for integrating SystemC TLM models into Functional Mock-up Interface (FMI)-based co-simulation workflows. By encapsulating SystemC TLM components as FMI 3.0 Co Simulation Functional Mock-up Units (FMUs), the proposed approach facilitates seamless, standardized integration across heterogeneous simulation environments. We introduce a lightweight open-source toolchain, address key technical challenges such as time synchronization and data exchange, and demonstrate the feasibility and effectiveness of the integration through representative case studies.

Giovanni Pollo, Andrei Mihai Albu, Alessio Burrello et al.

The recent advancements of the automotive sector demand robust co-simulation methodologies that enable early validation and seamless integration across hardware and software domains. However, the lack of standardized interfaces and the dominance of proprietary simulation platforms pose significant challenges to collaboration, scalability, and IP protection. To address these limitations, this paper presents an approach for automatically wrapping SystemC models by using the Functional Mock-up Interface (FMI) standard. This method combines the modeling accuracy and fast time-to-market of SystemC with the interoperability and encapsulation benefits of FMI, enabling secure and portable integration of embedded components into co-simulation workflows. We validate the proposed methodology on real-world case studies, demonstrating its effectiveness with complex designs.

Giovanni Pollo, Alessio Burrello, Enrico Macii et al.

Estimating the evolution of the battery's State of Charge (SoC) in response to its usage is critical for implementing effective power management policies and for ultimately improving the system's lifetime. Most existing estimation methods are either physics-based digital twins of the battery or data-driven models such as Neural Networks (NNs). In this work, we propose two new contributions in this domain. First, we introduce a novel NN architecture formed by two cascaded branches: one to predict the current SoC based on sensor readings, and one to estimate the SoC at a future time as a function of the load behavior. Second, we integrate battery dynamics equations into the training of our NN, merging the physics-based and data-driven approaches, to improve the models' generalization over variable prediction horizons. We validate our approach on two publicly accessible datasets, showing that our Physics-Informed Neural Networks (PINNs) outperform purely data-driven ones while also obtaining superior prediction accuracy with a smaller architecture with respect to the state-of-the-art.