Manuel Barusco

Fabrizio Genilotti, Arianna Stropeni, Gionata Grotto et al.

The reliability of a machine vision system for autonomous driving depends heavily on its training data distribution. When a vehicle encounters significantly different conditions, such as atypical obstacles, its perceptual capabilities can degrade substantially. Unlike many domains where errors carry limited consequences, failures in autonomous driving translate directly into physical risk for passengers, pedestrians, and other road users. To address this challenge, we explore Visual Anomaly Detection (VAD) as a solution. VAD enables the identification of anomalous objects not present during training, allowing the system to alert the driver when an unfamiliar situation is detected. Crucially, VAD models produce pixel-level anomaly maps that can guide driver attention to specific regions of concern without requiring any prior assumptions about the nature or form of the hazard. We benchmark eight state-of-the-art VAD methods on AnoVox, the largest synthetic dataset for anomaly detection in autonomous driving. In particular, we evaluate performance across four backbone architectures spanning from large networks to lightweight ones such as MobileNet and DeiT-Tiny. Our results demonstrate that VAD transfers effectively to road scenes. Notably, Tiny-Dinomaly achieves the best accuracy-efficiency trade-off for edge deployment, matching full-scale localization performance at a fraction of the memory cost. This study represents a concrete step toward safer, more responsible deployment of autonomous vehicles, ultimately improving protection for passengers, pedestrians, and all road users.

Manuel Barusco, Francesco Borsatti, David Petrovic et al.

Visual Anomaly Detection (VAD) is a critical task for many applications including industrial inspection and healthcare. While VAD has been extensively studied, two key challenges remain largely unaddressed in conjunction: edge deployment, where computational resources are severely constrained, and continual learning, where models must adapt to evolving data distributions without forgetting previously acquired knowledge. Our benchmark provides guidance for the selection of the optimal backbone and VAD method under joint efficiency and adaptability constraints, characterizing the trade-offs between memory footprint, inference cost, and detection performance. Studying these challenges in isolation is insufficient, as methods designed for one setting make assumptions that break down when the other constraint is simultaneously imposed. In this work, we propose the first comprehensive benchmark for VAD on the edge in the continual learning scenario, evaluating seven VAD models across three lightweight backbone architectures. Furthermore, we propose Tiny-Dinomaly, a lightweight adaptation of the Dinomaly model built on the DINO foundation model that achieves 13x smaller memory footprint and 20x lower computational cost while improving Pixel F1 by 5 percentage points. Finally, we introduce targeted modifications to PatchCore and PaDiM to improve their efficiency in the continual learning setting.

Arianna Stropeni, Fabrizio Genilotti, Francesco Borsatti et al.

Visual Anomaly Detection (VAD) is essential for industrial quality control, enabling automatic defect detection in manufacturing. In real production lines, VAD systems must satisfy strict real-time and privacy requirements, necessitating a shift from cloud-based processing to local edge deployment. However, processing data locally on edge devices introduces new challenges because edge hardware has limited memory and computational resources. To overcome these limitations, we propose two efficient VAD methods designed for edge deployment: PatchCore-Lite and Padim-Lite, based on the popular PatchCore and PaDiM models. PatchCore-Lite runs first a coarse search on a product-quantized memory bank, then an exact search on a decoded subset. Padim-Lite is sped up using diagonal covariance, turning Mahalanobis distance into efficient element-wise computation. We evaluate our methods on the MVTec AD and VisA benchmarks and show their suitability for edge environments. PatchCore-Lite achieves a remarkable 79% reduction in total memory footprint, while PaDiM-Lite achieves substantial efficiency gains with a 77% reduction in total memory and a 31% decrease in inference time. These results show that VAD can be effectively deployed on edge devices, enabling real-time, private, and cost-efficient industrial inspection.

Davide Frizzo, Fabrizio Genilotti, David Petrovic et al.

Virtual Reality (VR) applications require robust user identification systems to ensure secure access to equipment and protect worker identities. Motion tracking data from VR headsets and controllers has emerged as a powerful behavioral biometric, with recent studies demonstrating identification accuracies exceeding 94% across a large user base. However, the application of modern deep learning architectures, particularly State Space Models (SSM), to VR scenarios remains largely unexplored. In this work, we benchmark user identification performance across the large-scale Who is Alyx VR dataset, gathering data from 71 users playing the popular Half-Life:Alyx game. We evaluate both established architectures (Long Short-Term Memory (LSTM), Gated Recurrent Unit (GRU), Convolutional Neural Network (CNN), Temporal Convolutional Network (TCN), Transformer) and the emerging SSMs on time series motion data. Our results provide the first comprehensive benchmark of state-of-the-art and novel architectures for VR user identification, establishing baseline performance metrics for future privacy preserving authentication systems in manufacturing environments.

Manuel Barusco, Davide Dalle Pezze, Francesco Borsatti et al.

Visual Anomaly Detection (VAD) is crucial for industrial inspection, yet most existing methods are limited to single-category scenarios, failing to address the multi-class and continual learning demands of real-world environments. While Teacher-Student (TS) architectures are efficient, they remain unexplored for the Continual Setting. To bridge this gap, we propose AdapTS, a unified TS framework designed for multi-class and continual settings, optimized for edge deployment. AdapTS eliminates the need for two different architectures by utilizing a single shared frozen backbone and injecting lightweight trainable adapters into the student pathway. Training is enhanced via a segmentation-guided objective and synthetic Perlin noise, while a prototype-based task identification mechanism dynamically selects adapters at inference with 99\% accuracy. Experiments on MVTec AD and VisA demonstrate that AdapTS matches the performance of existing TS methods across multi-class and continual learning scenarios, while drastically reducing memory overhead. Our lightest variant, AdapTS-S, requires only 8 MB of additional memory, 13x less than STFPM (95 MB), 48x less than RD4AD (360 MB), and 149x less than DeSTSeg (1120 MB), making it a highly scalable solution for edge deployment in complex industrial environments.

Fabrizio Genilotti, Arianna Stropeni, Francesco Borsatti et al.

Space missions generate massive volumes of high-resolution orbital and surface imagery that far exceed the capacity for manual inspection. Detecting rare phenomena is scientifically critical, yet traditional supervised learning struggles due to scarce labeled examples and closed-world assumptions that prevent discovery of genuinely novel observations. In this work, we investigate Visual Anomaly Detection (VAD) as a framework for automated discovery in planetary exploration. We present the first empirical evaluation of state-of-the-art feature-based VAD methods on real planetary imagery, encompassing both orbital lunar data and Mars rover surface imagery. To support this evaluation, we introduce two benchmarks: (i) a lunar dataset derived from Lunar Reconnaissance Orbiter Camera Narrow Angle imagery, comprising of fresh and degraded craters as anomalies alongside normal terrain; and (ii) a Mars surface dataset designed to reflect the characteristics of rover-acquired imagery. We evaluate multiple VAD approaches with a focus on computationally efficient, edge-oriented solutions suitable for onboard deployment, applicable to both orbital platforms surveying the lunar surface and surface rovers operating on Mars. Our results demonstrate that feature-based VAD methods can effectively identify rare planetary surface phenomena while remaining feasible for resource-constrained environments. By grounding anomaly detection in planetary science, this work establishes practical benchmarks and highlights the potential of open-world perception systems to support a range of mission-critical applications, including tactical planning, landing site selection, hazard detection, bandwidth-aware data prioritization, and the discovery of unanticipated geological processes.

Jinwei Hu, Francesco Borsatti, Arianna Stropeni et al.

Industrial visual anomaly detection (VAD) methods are typically trained on normal samples only, yet performance improves substantially when even limited anomalous data is available. Existing anomaly generation approaches either require real anomalous examples, demand expensive hardware, or produce synthetic defects that lack realism. We present MIRAGE (Model-agnostic Industrial Realistic Anomaly Generation and Evaluation), a fully automated pipeline for realistic anomalous image generation and pixel-level mask creation that requires no training and no anomalous images. Our pipeline accesses any generative model as a black box via API calls, uses a VLM for automatic defect prompt generation, and includes a CLIP-based quality filter to retain only well-aligned generated images. For mask generation at scale, we introduce a lightweight, training-free dual-branch semantic change detection module combining text-conditioned Grounding DINO features with fine-grained YOLOv26-Seg structural features. We benchmark four generation methods using Gemini 2.5 Flash Image (Nano Banana) as the generative backbone, evaluating performance on MVTec AD and VisA across two distinct tasks: (i) downstream anomaly segmentation and (ii) visual quality of the generated images, assessed via standard metrics (IS, IC-LPIPS) and a human perceptual study involving 31 participants and 1,550 pairwise votes. The results demonstrate that MIRAGE offers a scalable, accessible foundation for anomaly-aware industrial inspection that requires no real defect data. As a final contribution, we publicly release a large-scale dataset comprising 500 image-mask pairs per category for every MVTec AD and VisA class, over 13,000 pairs in total, alongside all generation prompts and pipeline code.

Manuel Barusco, Francesco Borsatti, Davide Dalle Pezze et al.

Visual Anomaly Detection (VAD) has gained significant research attention for its ability to identify anomalous images and pinpoint the specific areas responsible for the anomaly. A key advantage of VAD is its unsupervised nature, which eliminates the need for costly and time-consuming labeled data collection. However, despite its potential for real-world applications, the literature has given limited focus to resource-efficient VAD, particularly for deployment on edge devices. This work addresses this gap by leveraging lightweight neural networks to reduce memory and computation requirements, enabling VAD deployment on resource-constrained edge devices. We benchmark the major VAD algorithms within this framework and demonstrate the feasibility of edge-based VAD using the well-known MVTec dataset. Furthermore, we introduce a novel algorithm, Partially Shared Teacher-student (PaSTe), designed to address the high resource demands of the existing Student Teacher Feature Pyramid Matching (STFPM) approach. Our results show that PaSTe decreases the inference time by 25%, while reducing the training time by 33% and peak RAM usage during training by 76%. These improvements make the VAD process significantly more efficient, laying a solid foundation for real-world deployment on edge devices.

Manuel Barusco, Lorenzo D'Antoni, Davide Dalle Pezze et al.

Visual Anomaly Detection (VAD) is a critical task in computer vision with numerous real-world applications. However, deploying these models on edge devices presents significant challenges, such as constrained computational and memory resources. Additionally, dynamic data distributions in real-world settings necessitate continuous model adaptation, further complicating deployment under limited resources. To address these challenges, we present a novel investigation into the problem of Continual Learning for Visual Anomaly Detection (CLAD) on edge devices. We evaluate the STFPM approach, given its low memory footprint on edge devices, which demonstrates good performance when combined with the Replay approach. Furthermore, we propose to study the behavior of a recently proposed approach, PaSTe, specifically designed for the edge but not yet explored in the Continual Learning context. Our results show that PaSTe is not only a lighter version of STPFM, but it also achieves superior anomaly detection performance, improving the f1 pixel performance by 10% with the Replay technique. In particular, the structure of PaSTe allows us to test it using a series of Compressed Replay techniques, reducing memory overhead by a maximum of 91.5% compared to the traditional Replay for STFPM. Our study proves the feasibility of deploying VAD models that adapt and learn incrementally on CLAD scenarios on resource-constrained edge devices.

Arianna Stropeni, Francesco Borsatti, Manuel Barusco et al.

Visual Anomaly Detection (VAD) is a key task in industrial settings, where minimizing operational costs is essential. Deploying deep learning models within Internet of Things (IoT) environments introduces specific challenges due to limited computational power and bandwidth of edge devices. This study investigates how to perform VAD effectively under such constraints by leveraging compact, efficient processing strategies. We evaluate several data compression techniques, examining the tradeoff between system latency and detection accuracy. Experiments on the MVTec AD benchmark demonstrate that significant compression can be achieved with minimal loss in anomaly detection performance compared to uncompressed data. Current results show up to 80% reduction in end-to-end inference time, including edge processing, transmission, and server computation.

Manuel Barusco, Francesco Borsatti, Davide Dalle Pezze et al.

Recent advances in Visual Anomaly Detection (VAD) have introduced sophisticated algorithms leveraging embeddings generated by pre-trained feature extractors. Inspired by these developments, we investigate the adaptation of such algorithms to the audio domain to address the problem of Audio Anomaly Detection (AAD). Unlike most existing AAD methods, which primarily classify anomalous samples, our approach introduces fine-grained temporal-frequency localization of anomalies within the spectrogram, significantly improving explainability. This capability enables a more precise understanding of where and when anomalies occur, making the results more actionable for end users. We evaluate our approach on industrial and environmental benchmarks, demonstrating the effectiveness of VAD techniques in detecting anomalies in audio signals. Moreover, they improve explainability by enabling localized anomaly identification, making audio anomaly detection systems more interpretable and practical.

Arianna Stropeni, Valentina Zaccaria, Francesco Borsatti et al.

In recent years, Visual Anomaly Detection (VAD) has gained significant attention due to its ability to identify anomalous images using only normal images during training. Many VAD models work without supervision but are still able to provide visual explanations by highlighting the anomalous regions within an image. However, although these visual explanations can be helpful, they lack a direct and semantically meaningful interpretation for users. To address this limitation, we propose extending Concept Bottleneck Models (CBMs) to the VAD setting. By learning meaningful concepts, the network can provide human-interpretable descriptions of anomalies, offering a novel and more insightful way to explain them. Our contributions are threefold: (i) we develop a Concept Dataset to support research on CBMs for VAD; (ii) we improve the CBM architecture to generate both concept-based and visual explanations, bridging semantic and localization interpretability; and (iii) we introduce a pipeline for synthesizing artificial anomalies, preserving the VAD paradigm of minimizing dependence on rare anomalous samples. Our approach, Concept-Aware Visual Anomaly Detection (CONVAD), achieves performance comparable to classic VAD methods while providing richer, concept-driven explanations that enhance interpretability and trust in VAD systems.

Manuel Barusco, Francesco Borsatti, Nicola Beda et al.

Visual Anomaly Detection (VAD) seeks to identify abnormal images and precisely localize the corresponding anomalous regions, relying solely on normal data during training. This approach has proven essential in domains such as manufacturing and, more recently, in the medical field, where accurate and explainable detection is critical. Despite its importance, the impact of evolving input data distributions over time has received limited attention, even though such changes can significantly degrade model performance. In particular, given the dynamic and evolving nature of medical imaging data, Continual Learning (CL) provides a natural and effective framework to incrementally adapt models while preserving previously acquired knowledge. This study explores for the first time the application of VAD models in a CL scenario for the medical field. In this work, we utilize a CL version of the well-established PatchCore model, called PatchCoreCL, and evaluate its performance using BMAD, a real-world medical imaging dataset with both image-level and pixel-level annotations. Our results demonstrate that PatchCoreCL is an effective solution, achieving performance comparable to the task-specific models, with a forgetting value less than a 1%, highlighting the feasibility and potential of CL for adaptive VAD in medical imaging.

Manuel Barusco, Francesco Borsatti, Arianna Stropeni et al.

VAD is a critical field in machine learning focused on identifying deviations from normal patterns in images, often challenged by the scarcity of anomalous data and the need for unsupervised training. To accelerate research and deployment in this domain, we introduce MoViAD, a comprehensive and highly modular library designed to provide fast and easy access to state-of-the-art VAD models, trainers, datasets, and VAD utilities. MoViAD supports a wide array of scenarios, including continual, semi-supervised, few-shots, noisy, and many more. In addition, it addresses practical deployment challenges through dedicated Edge and IoT settings, offering optimized models and backbones, along with quantization and compression utilities for efficient on-device execution and distributed inference. MoViAD integrates a selection of backbones, robust evaluation VAD metrics (pixel-level and image-level) and useful profiling tools for efficiency analysis. The library is designed for fast, effortless deployment, enabling machine learning engineers to easily use it for their specific setup with custom models, datasets, and backbones. At the same time, it offers the flexibility and extensibility researchers need to develop and experiment with new methods.

Adrian Poniatowski, Natalie Gentner, Manuel Barusco et al.

In the semiconductor sector, due to high demand but also strong and increasing competition, time to market and quality are key factors in securing significant market share in various application areas. Thanks to the success of deep learning methods in recent years in the computer vision domain, Industry 4.0 and 5.0 applications, such as defect classification, have achieved remarkable success. In particular, Domain Adaptation (DA) has proven highly effective since it focuses on using the knowledge learned on a (source) domain to adapt and perform effectively on a different but related (target) domain. By improving robustness and scalability, DA minimizes the need for extensive manual re-labeling or re-training of models. This not only reduces computational and resource costs but also allows human experts to focus on high-value tasks. Therefore, we tested the efficacy of DA techniques in semi-supervised and unsupervised settings within the context of the semiconductor field. Moreover, we propose the DBACS approach, a CycleGAN-inspired model enhanced with additional loss terms to improve performance. All the approaches are studied and validated on real-world Electron Microscope images considering the unsupervised and semi-supervised settings, proving the usefulness of our method in advancing DA techniques for the semiconductor field.

Manuel Barusco, Francesco Borsatti, Youssef Ben Khalifa et al.

Semiconductor manufacturing is a complex, multistage process. Automated visual inspection of Scanning Electron Microscope (SEM) images is indispensable for minimizing equipment downtime and containing costs. Most previous research considers supervised approaches, assuming a sufficient number of anomalously labeled samples. On the contrary, Visual Anomaly Detection (VAD), an emerging research domain, focuses on unsupervised learning, avoiding the costly defect collection phase while providing explanations of the predictions. We introduce a benchmark for VAD in the semiconductor domain by leveraging the MIIC dataset. Our results demonstrate the efficacy of modern VAD approaches in this field.

Nikola Bugarin, Jovana Bugaric, Manuel Barusco et al.

Anomaly Detection is a relevant problem in numerous real-world applications, especially when dealing with images. However, little attention has been paid to the issue of changes over time in the input data distribution, which may cause a significant decrease in performance. In this study, we investigate the problem of Pixel-Level Anomaly Detection in the Continual Learning setting, where new data arrives over time and the goal is to perform well on new and old data. We implement several state-of-the-art techniques to solve the Anomaly Detection problem in the classic setting and adapt them to work in the Continual Learning setting. To validate the approaches, we use a real-world dataset of images with pixel-based anomalies to provide a reliable benchmark and serve as a foundation for further advancements in the field. We provide a comprehensive analysis, discussing which Anomaly Detection methods and which families of approaches seem more suitable for the Continual Learning setting.