Markku Juntti

Van-Dinh Nguyen, Thang X. Vu, Nhan Thanh Nguyen et al.

To enable an intelligent, programmable and multi-vendor radio access network (RAN) for 6G networks, considerable efforts have been made in standardization and development of open RAN (O-RAN). So far, however, the applicability of O-RAN in controlling and optimizing RAN functions has not been widely investigated. In this paper, we jointly optimize the flow-split distribution, congestion control and scheduling (JFCS) to enable an intelligent traffic steering application in O-RAN. Combining tools from network utility maximization and stochastic optimization, we introduce a multi-layer optimization framework that provides fast convergence, long-term utility-optimality and significant delay reduction compared to the state-of-the-art and baseline RAN approaches. Our main contributions are three-fold: i) we propose the novel JFCS framework to efficiently and adaptively direct traffic to appropriate radio units; ii) we develop low-complexity algorithms based on the reinforcement learning, inner approximation and bisection search methods to effectively solve the JFCS problem in different time scales; and iii) the rigorous theoretical performance results are analyzed to show that there exists a scaling factor to improve the tradeoff between delay and utility-optimization. Collectively, the insights in this work will open the door towards fully automated networks with enhanced control and flexibility. Numerical results are provided to demonstrate the effectiveness of the proposed algorithms in terms of the convergence rate, long-term utility-optimality and delay reduction.

Nir Shlezinger, Mengyuan Ma, Ortal Lavi et al.

Hybrid multiple-input multiple-output (MIMO) is an attractive technology for realizing extreme massive MIMO systems envisioned for future wireless communications in a scalable and power-efficient manner. However, the fact that hybrid MIMO systems implement part of their beamforming in analog and part in digital makes the optimization of their beampattern notably more challenging compared with conventional fully digital MIMO. Consequently, recent years have witnessed a growing interest in using data-aided artificial intelligence (AI) tools for hybrid beamforming design. This article reviews candidate strategies to leverage data to improve real-time hybrid beamforming design. We discuss the architectural constraints and characterize the core challenges associated with hybrid beamforming optimization. We then present how these challenges are treated via conventional optimization, and identify different AI-aided design approaches. These can be roughly divided into purely data-driven deep learning models and different forms of deep unfolding techniques for combining AI with classical optimization.We provide a systematic comparative study between existing approaches including both numerical evaluations and qualitative measures. We conclude by presenting future research opportunities associated with the incorporation of AI in hybrid MIMO systems.

Sina Tavakolian, Nhan Thanh Nguyen, Ahmed Alkhateeb et al.

Beamforming in millimeter-wave (mmWave) high-mobility environments typically incurs substantial training overhead. While prior studies suggest that sub-6 GHz channels can be exploited to predict optimal mmWave beams, existing methods depend on large deep learning (DL) models with prohibitive computational and memory requirements. In this paper, we propose a computationally efficient framework for sub-6 GHz channel-mmWave beam mapping based on the knowledge distillation (KD) technique. We develop two compact student DL architectures based on individual and relational distillation strategies, which retain only a few hidden layers yet closely mimic the performance of large teacher DL models. Extensive simulations demonstrate that the proposed student models achieve the teacher's beam prediction accuracy and spectral efficiency while reducing trainable parameters and computational complexity by 99%.

Elaheh Ataeebojd, Nhan Thanh Nguyen, Seonghoon Yoo et al.

Stacked intelligent metasurfaces (SIMs) provide wave-domain degrees of freedom that can empower integrated sensing and communication (ISAC) through flexible beampattern synthesis and interference management, while reducing hardware cost. In this paper, we investigate energy-efficient resource allocation for a downlink SIM-aided multi-user ISAC system that supports the coexistence of enhanced mobile broadband (eMBB) and ultra-reliable and low-latency communication (URLLC) via puncturing, while simultaneously illuminating sensing targets. We formulate an energy efficiency (EE) maximization problem that jointly optimizes resource block (RB) allocation, transmit power control, and SIM phase shifts. The formulated problem is highly challenging due to the large number of variables optimized on different time scales. To overcome this, we leverage the intrinsic two-timescale structure induced by the puncturing approach to decompose the original problem into two tractable subproblems: EE maximization for eMBB users in each time slot and EE maximization for URLLC users and sensing targets in each mini-slot. To address each subproblem, we develop an iterative algorithm that transforms the original non-convex formulation into a sequence of tractable subproblems, yielding convex updates for RB allocation and power control, along with low-complexity updates for SIM phase shifts. Simulation results show that the proposed design achieves up to 230% improvement in EE over a No-SIM baseline. In addition, it requires significantly fewer transmit antennas than conventional BS architectures, while preserving the EE achieved and satisfying the communication and sensing quality of service (QoS) requirements. Moreover, the results reveal fundamental trade-offs between EE and heterogeneous QoS requirements across communication and sensing functionalities.

Jiguang He, Fan Jiang, Kamran Keykhosravi et al.

Upcoming beyond fifth generation (5G) communications systems aim at further enhancing key performance indicators and fully supporting brand new use cases by embracing emerging techniques, e.g., reconfigurable intelligent surface (RIS), integrated communication, localization, and sensing, and mmWave/THz communications. The wireless intelligence empowered by state-of-the-art artificial intelligence techniques has been widely considered at the transceivers, and now the paradigm is deemed to be shifted to the smart control of radio propagation environment by virtue of RISs. In this article, we argue that to harness the full potential of RISs, localization and communication must be tightly coupled. This is in sharp contrast to 5G and earlier generations, where localization was a minor additional service. To support this, we first introduce the fundamentals of RIS mmWave channel modeling, followed by RIS channel state information acquisition and link establishment. Then, we deal with the connection between localization and communications, from a separate and joint perspective.

Jiguang He, Henk Wymeersch, Marco Di Renzo et al.

Inspired by the remarkable learning and prediction performance of deep neural networks (DNNs), we apply one special type of DNN framework, known as model-driven deep unfolding neural network, to reconfigurable intelligent surface (RIS)-aided millimeter wave (mmWave) single-input multiple-output (SIMO) systems. We focus on uplink cascaded channel estimation, where known and fixed base station combining and RIS phase control matrices are considered for collecting observations. To boost the estimation performance and reduce the training overhead, the inherent channel sparsity of mmWave channels is leveraged in the deep unfolding method. It is verified that the proposed deep unfolding network architecture can outperform the least squares (LS) method with a relatively smaller training overhead and online computational complexity.

Jiguang He, Nhan Thanh Nguyen, Rafaela Schroeder et al.

Reconfigurable intelligent surfaces (RISs) are considered as potential technologies for the upcoming sixth-generation (6G) wireless communication system. Various benefits brought by deploying one or multiple RISs include increased spectrum and energy efficiency, enhanced connectivity, extended communication coverage, reduced complexity at transceivers, and even improved localization accuracy. However, to unleash their full potential, fundamentals related to RISs, ranging from physical-layer (PHY) modelling to RIS phase control, need to be addressed thoroughly. In this paper, we provide an overview of some timely research problems related to the RIS technology, i.e., PHY modelling (including also physics), channel estimation, potential RIS architectures, and RIS phase control (via both model-based and data-driven approaches), along with recent numerical results. We envision that more efforts will be devoted towards intelligent wireless environments, enabled by RISs.

Ijaz Ahmad, Shahriar Shahabuddin, Tanesh Kumar et al.

The Internet of Things (IoT), hailed as the enabler of the next industrial revolution, will require ubiquitous connectivity, context-aware and dynamic service mobility, and extreme security through the wireless network infrastructure. Artificial Intelligence (AI), thus, will play a major role in the underlying network infrastructure. However, a number of challenges will surface while using the concepts, tools and algorithms of AI in wireless networks used by IoT. In this article, the main challenges in using AI in the wireless network infrastructure that facilitate end-to-end IoT communication are highlighted with potential generalized solution and future research directions.