Zhihong Ma

Ruiming Du, Zhihong Ma, Pengyao Xie et al.

Segmentation of plant point clouds to obtain high-precise morphological traits is essential for plant phenotyping. Although the fast development of deep learning has boosted much research on segmentation of plant point clouds, previous studies mainly focus on the hard voxelization-based or down-sampling-based methods, which are limited to segmenting simple plant organs. Segmentation of complex plant point clouds with a high spatial resolution still remains challenging. In this study, we proposed a deep learning network plant segmentation transformer (PST) to achieve the semantic and instance segmentation of rapeseed plants point clouds acquired by handheld laser scanning (HLS) with the high spatial resolution, which can characterize the tiny siliques as the main traits targeted. PST is composed of: (i) a dynamic voxel feature encoder (DVFE) to aggregate the point features with the raw spatial resolution; (ii) the dual window sets attention blocks to capture the contextual information; and (iii) a dense feature propagation module to obtain the final dense point feature map. The results proved that PST and PST-PointGroup (PG) achieved superior performance in semantic and instance segmentation tasks. For the semantic segmentation, the mean IoU, mean Precision, mean Recall, mean F1-score, and overall accuracy of PST were 93.96%, 97.29%, 96.52%, 96.88%, and 97.07%, achieving an improvement of 7.62%, 3.28%, 4.8%, 4.25%, and 3.88% compared to the second-best state-of-the-art network PAConv. For instance segmentation, PST-PG reached 89.51%, 89.85%, 88.83% and 82.53% in mCov, mWCov, mPerc90, and mRec90, achieving an improvement of 2.93%, 2.21%, 1.99%, and 5.9% compared to the original PG. This study proves that the deep-learning-based point cloud segmentation method has a great potential for resolving dense plant point clouds with complex morphological traits.

Yang Liu, Yi Chen, Yongwei Zhao et al.

The rapid advancement of Large Language Models (LLMs) has established language as a core general-purpose cognitive substrate, driving the demand for specialized Language Processing Units (LPUs) tailored for LLM inference. To overcome the growing energy consumption of LLM inference systems, this paper proposes a Hardwired-Neurons Language Processing Unit (HNLPU), which physically hardwires LLM weight parameters into the computational fabric, achieving several orders of magnitude computational efficiency improvement by extreme specialization. However, a significant challenge still lies in the scale of modern LLMs. An ideal estimation on hardwiring gpt-oss 120 B requires fabricating at least 6 billion dollars of photomask sets, rendering the straightforward solution economically impractical. Addressing this challenge, we propose the novel Metal-Embedding methodology. Instead of embedding weights in a 2D grid of silicon device cells, Metal-Embedding embeds weight parameters into the 3D topology of metal wires. This brings two benefits: (1) a 15x increase in density, and (2) 60 out of 70 layers of photomasks are made homogeneous across chips, including all EUV photomasks. In total, Metal-Embedding reduced the photomask cost by 112x, bringing the Non-Recurring Engineering (NRE) cost of HNLPU into an economically viable range. Experimental results show that HNLPU achieved 249,960 tokens/s (5,555x/85x of GPU/WSE), 36 tokens/J (1,047x/283x of GPU/WSE), 13,232 mm2 total die area (29% inscribed rectangular area in a 300 mm wafer), \$184M estimated NRE at 5 nm technology. Analysis shows that HNLPU achieved 8.57x cost-effectiveness and 230x carbon footprint reduction compared to H100 clusters, under an annual weight updating assumption.

Pengyao Xie, Zhihong Ma, Ruiming Du et al.

Fusion of 3D and MS imaging data has a great potential for high-throughput plant phenotyping of structural and biochemical as well as physiological traits simultaneously, which is important for decision support in agriculture and for crop breeders in selecting the best genotypes. However, lacking of 3D data integrity of various plant canopy structures and low-quality of MS images caused by the complex illumination effects make a great challenge, especially at the proximal imaging scale. Therefore, this study proposed a novel approach for adaptive data acquisition and radiometric calibration to generate high-quality 3DMPCs of plants. An efficient NBV planning method based on an UGV plant phenotyping system with a multi-sensor-equipped robotic arm was proposed to achieve adaptive data acquisition. The NeREF was employed to predict the DN values of the hemispherical reference for radiometric calibration. For NBV planning, the average total time for single plant at a joint speed of 1.55 rad/s was about 62.8 s, with an average reduction of 18.0% compared to the unplanned. The integrity of the whole-plant data was improved by an average of 23.6% compared to the fixed viewpoints alone. Compared with the ASD measurements, the RMSE of the reflectance spectra obtained from 3DMPCs at different regions of interest was 0.08 with an average decrease of 58.93% compared to the results obtained from the single-frame of MS images without 3D radiometric calibration. The 3D-calibrated plant 3DMPCs improved the predictive accuracy of PLSR for chlorophyll content, with an average increase of 0.07 in R2 and an average decrease of 21.25% in RMSE. Our approach introduced a fresh perspective on generating high-quality 3DMPCs of plants under the natural light condition, enabling more precise analysis of plant morphological and physiological parameters.