2.6OCJan 17, 2018
Coupling Load-Following Control with OPFMohammadhafez Bazrafshan, Nikolaos Gatsis, Ahmad Taha et al.
In this paper, the optimal power flow (OPF) problem is augmented to account for the costs associated with the load-following control of a power network. Load-following control costs are expressed through the linear quadratic regulator (LQR). The power network is described by a set of nonlinear differential algebraic equations (DAEs). By linearizing the DAEs around a known equilibrium, a linearized OPF that accounts for steady-state operational constraints is formulated first. This linearized OPF is then augmented by a set of linear matrix inequalities that are algebraically equivalent to the implementation of an LQR controller. The resulting formulation, termed LQR-OPF, is a semidefinite program which furnishes optimal steady-state setpoints and an optimal feedback law to steer the system to the new steady state with minimum load-following control costs. Numerical tests demonstrate that the setpoints computed by LQR-OPF result in lower overall costs and frequency deviations compared to the setpoints of a scheme where OPF and load-following control are considered separately.
2.9CRDec 18, 2020
Effectiveness of SCADA System Security Used Within Critical InfrastructureJoshua Taylor
Since the 1960s Supervisory Control and Data Acquisition (SCADA) systems have been used within industry. Referred to as critical infrastructure (CI), key installations such as power stations, water treatment and energy grids are controlled using SCADA. Existing literature reveals inherent security risks to CI and suggests this stems from the rise of interconnected networks, leading to the hypothesis that the rise of interconnectivity between corporate networks and SCADA system networks pose security risks to CI. The results from studies into previous global attacks involving SCADA and CI, with focus on two highly serious incidents in Iran and Ukraine, reveal that although interconnectivity is a major factor, isolated CIs are still highly vulnerable to attack due to risks within the SCADA controllers and protocols.
8.0OCMay 5, 2020
Online Convex Optimization with Binary ConstraintsAntoine Lesage-Landry, Joshua A. Taylor, Duncan S. Callaway
We consider online optimization with binary decision variables and convex loss functions. We design a new algorithm, binary online gradient descent (bOGD) and bound its expected dynamic regret. We provide a regret bound that holds for any time horizon and a specialized bound for finite time horizons. First, we present the regret as the sum of the relaxed, continuous round optimum tracking error and the rounding error of our update in which the former asymptomatically decreases with time under certain conditions. Then, we derive a finite-time bound that is sublinear in time and linear in the cumulative variation of the relaxed, continuous round optima. We apply bOGD to demand response with thermostatically controlled loads, in which binary constraints model discrete on/off settings. We also model uncertainty and varying load availability, which depend on temperature deadbands, lockout of cooling units and manual overrides. We test the performance of bOGD in several simulations based on demand response. The simulations corroborate that the use of randomization in bOGD does not significantly degrade performance while making the problem more tractable.
8.7OCMay 15, 2019
Predictive Online Convex OptimizationAntoine Lesage-Landry, Iman Shames, Joshua A. Taylor
We incorporate future information in the form of the estimated value of future gradients in online convex optimization. This is motivated by demand response in power systems, where forecasts about the current round, e.g., the weather or the loads' behavior, can be used to improve on predictions made with only past observations. Specifically, we introduce an additional predictive step that follows the standard online convex optimization step when certain conditions on the estimated gradient and descent direction are met. We show that under these conditions and without any assumptions on the predictability of the environment, the predictive update strictly improves on the performance of the standard update. We give two types of predictive update for various family of loss functions. We provide a regret bound for each of our predictive online convex optimization algorithms. Finally, we apply our framework to an example based on demand response which demonstrates its superior performance to a standard online convex optimization algorithm.
11.6OCSep 12, 2017
Setpoint Tracking with Partially Observed LoadsAntoine Lesage-Landry, Joshua A. Taylor
We use online convex optimization (OCO) for setpoint tracking with uncertain, flexible loads. We consider full feedback from the loads, bandit feedback, and two intermediate types of feedback: partial bandit where a subset of the loads are individually observed and the rest are observed in aggregate, and Bernoulli feedback where in each round the aggregator receives either full or bandit feedback according to a known probability. We give sublinear regret bounds in all cases. We numerically evaluate our algorithms on examples with thermostatically controlled loads and electric vehicles.
1.2SYJun 15, 2015
Power Systems Without FuelJoshua Adam Taylor, Sairaj V. Dhople, Duncan S. Callaway
The finiteness of fossil fuels implies that future electric power systems may predominantly source energy from fuel-free renewable resources like wind and solar. Evidently, these power systems without fuel will be environmentally benign, sustainable, and subject to milder failure scenarios. Many of these advantages were projected decades ago with the definition of the soft energy path, which describes a future where all energy is provided by numerous small, simple, and diverse renewable sources. Here we provide a thorough investigation of power systems without fuel from technical and economic standpoints. The paper is organized by timescale and covers issues like the irrelevance of unit commitment in networks without large, fuel-based generators, the dubiousness of nodal pricing without fuel costs, and the need for new system-level models and control methods for semiconductor-based energy-conversion interfaces.