Emre Sarıyıldız

Emre Sariyildiz, Roberto Oboe, Kouhei Ohnishi

Disturbance Observer has been one of the most widely used robust control tools since it was proposed in 1983. This paper introduces the origins of Disturbance Observer and presents a survey of the major results on Disturbance Observer-based robust control in the last thirty-five years. Furthermore, it explains the analysis and synthesis techniques of Disturbance Observer-based robust control for linear and nonlinear systems by using a unified framework. In the last section, this paper presents concluding remarks on Disturbance Observer-based robust control and its engineering applications.

Emre Sariyildiz, Rahim Mutlu, Chuanlin Zhang

This paper proposes a new Active Disturbance Rejection based robust trajectory tracking controller design method in state space. It can compensate not only matched but also mismatched disturbances. Robust state and control input references are generated in terms of a fictitious design variable, namely differentially flat output, and the estimations of disturbances by using Differential Flatness and Disturbance Observer. Two different robust controller design techniques are proposed by using Brunovsky canonical form and polynomial matrix form approaches. The robust position control problem of a two mass-spring-damper system is studied to verify the proposed robust controllers.

C. Beldek, A. Dunn, J. Cunningham et al.

This paper presents multi-vision-based localisation strategies for harvesting robots. Identifying picking points accurately is essential for robotic harvesting because insecure grasping can lead to economic loss through fruit damage and dropping. In this study, two multi-vision-based localisation methods, namely the analytical approach and model-based algorithms, were employed. The actual geometric centre points of fruits were collected using a motion capture system (mocap), and two different surface points Cfix and Ceih were extracted using two Red-Green-Blue-Depth (RGB-D) cameras. First, the picking points of the target fruit were detected using analytical methods. Second, various primary and ensemble learning methods were employed to predict the geometric centre of target fruits by taking surface points as input. Adaboost regression, the most successful model-based localisation algorithm, achieved 88.8% harvesting accuracy with a Mean Euclidean Distance (MED) of 4.40 mm, while the analytical approach reached 81.4% picking success with a MED of 14.25 mm, both demonstrating better performance than the single-camera, which had a picking success rate of 77.7% with a MED of 24.02 mm. To evaluate the effect of picking point accuracy in collecting fruits, a series of robotic harvesting experiments were performed utilising a collaborative robot (cobot). It is shown that multi-vision systems can improve picking point localisation, resulting in higher success rates of picking in robotic harvesting.

Caner Beldek, Emre Sariyildiz, Son Lam Phung et al.

Occlusion remains a critical challenge in robotic fruit harvesting, as undetected or inaccurately localised fruits often results in substantial crop losses. To mitigate this issue, we propose a harvesting framework using a new amodal segmentation model, GDA-YOLO11, which incorporates architectural improvements and an updated asymmetric mask loss. The proposed model is trained on a modified version of a public citrus dataset and evaluated on both the base dataset and occlusion-sensitive subsets with varying occlusion levels. Within the framework, full fruit masks, including invisible regions, are inferred by GDA-YOLO11, and picking points are subsequently estimated using the Euclidean distance transform. These points are then projected into 3D coordinates for robotic harvesting execution. Experiments were conducted using real citrus fruits in a controlled environment simulating occlusion scenarios. Notably, to the best of our knowledge, this study provides the first practical demonstration of amodal instance segmentation in robotic fruit harvesting. GDA-YOLO11 achieves a precision of 0.844, recall of 0.846, mAP@50 of 0.914, and mAP@50:95 of 0.636, outperforming YOLO11n by 5.1%, 1.3%, and 1.0% in precision, mAP@50, and mAP@50:95, respectively. The framework attains harvesting success rates of 92.59%, 85.18%, 48.14%, and 22.22% at zero to high occlusion levels, improving success by 3.5% under medium and high occlusion. These findings demonstrate that GDA-YOLO11 enhances occlusion robust segmentation and streamlines perception-to-action integration, paving the way for more reliable autonomous systems in agriculture.

Emre Sariyildiz

This paper proposes a unified robust motion controller for the position and force control problems of compliant robot manipulators driven by Series Elastic Actuators (SEAs). It is shown that the dynamic model of the compliant robot includes not only matched but also mismatched disturbances that act on the system through a different channel from the control input. To tackle this complex robust control problem, the unified robust motion controller is synthesised by employing a second-order Disturbance Observer (DOb), which allows us to estimate not only disturbances but also their first and second order derivatives, and a novel controller design approach in state space. By using the Brunovsky canonical form transformation and the estimations of disturbances and their first and second order derivatives, the dynamic model of the robot is reconstructed so that a new system model that includes only matched disturbances is obtained for compliant robots driven by SEAs. The robust position and force controllers are simply designed by eliminating the matched disturbances of the reconstructed system model via the conventional DOb-based robust control method. The stability and performance of the proposed robust motion controllers are verified by simulations.

Emre Sariyildiz, Satoshi Hangai, Tarik Uzunovic et al.

This paper analyses the robust stability and performance of the Disturbance Observer- (DOb-) based digital motion control systems in discrete-time domain. It is shown that the phase margin and the robustness of the digital motion controller can be directly adjusted by tuning the nominal plant model and the bandwidth of the observer. However, they have upper and lower bounds due to robust stability and performance constraints as well as noise-sensitivity. The constraints on the design parameters of the DOb change when the digital motion controller is synthesised by measuring different states of a servo system. For example, the bandwidth of the DOb is limited by noise-sensitivity and waterbed effect when velocity and position measurements are employed in the digital robust motion controller synthesis. The robustness constraint due to the waterbed effect is removed when the DOb is implemented by acceleration measurement. The design constraints on the nominal plant model and the bandwidth of the observer are analytically derived by employing the generalised Bode Integral Theorem in discrete-time. The proposed design constraints allow one to systematically synthesise a high-performance DOb-based digital robust motion controller. Experimental results are given to verify the proposed analysis and synthesis methods.

Emre Sariyildiz, Rahim Mutlu, Haoyong Yu

This paper deals with the robust force and position control problems of Series Elastic Actuators. It is shown that a Series Elastic Actuator's force control problem can be described by a second-order dynamic model which suffers from only matched disturbances. However, the position control dynamics of a Series Elastic Actuator is of fourth-order and includes matched and mismatched disturbances. In other words, a Series Elastic Actuator's position control is more complicated than its force control, particularly when disturbances are considered. A novel robust motion controller is proposed for Series Elastic Actuators by using Disturbance Observer and Sliding Mode Control. When the proposed robust motion controller is implemented, a Series Elastic Actuator can precisely track desired trajectories and safely contact with an unknown and dynamic environment. The proposed motion controller does not require precise dynamic models of the actuator and environment. Therefore, it can be applied to many different advanced robotic systems such as compliant humanoids and exoskeletons. The validity of the motion controller is experimentally verified.