J. Andrew Zhang

Dianhao Zheng, Hongbin Zhang, J. Andrew Zhang et al.

This note investigates the stability of both linear and nonlinear switched systems with average dwell time. Two new analysis methods are proposed. Different from existing approaches, the proposed methods take into account the sequence in which the subsystems are switched. Depending on the predecessor or successor subsystems to be considered, sequence-based average preceding dwell time (SBAPDT) and sequence-based average subsequence dwell time (SBASDT) approaches are proposed and discussed for both continuous and discrete time systems. These proposed methods, when considering the switch sequence, have the potential to further reduce the conservativeness of the existing approaches. A comparative numerical example is also given to demonstrate the advantages of the proposed approaches.

Yanmo Hu, Weifeng Zhu, Chenshu Wu et al.

This paper considers a networked tracking architecture in 6G integrated sensing and communication (ISAC) systems, where multiple base stations (BSs) cooperatively transmit radio signals and process received echo signals to track multiple moving targets. Compared to the single-BS counterpart, networked tracking allows the moving targets to be associated with different BSs over time such that the wireless resources can be dynamically allocated among BSs based on target locations. However, networked tracking imposes new challenges for algorithm design and resource allocation. In this paper, we first design the networked Kalman Filter (NKF) that is suitable for multi-BS based tracking, then characterize the posterior Cramer-Rao bound (PCRB) under this NKF, and last design the beamforming vectors of all the BSs to minimize the tracking PCRB. Numerical results show that our dynamic beamforming design can properly associate the targets to the suitable BSs at various sensing blocks and reduce the tracking mean-squared error (MSE).

Zhongqin Wang, J. Andrew Zhang, Kai Wu et al.

Integrated Sensing and Communication (ISAC) is a key enabler for next-generation wireless systems. However, real-world deployment is often limited to low-cost, single-antenna transceivers. In such bistatic Single-Input Single-Output (SISO) setup, clock asynchrony introduces random phase offsets in Channel State Information (CSI), which cannot be mitigated using conventional multi-antenna methods. This work proposes WiDFS 3.0, a lightweight bistatic SISO sensing framework that enables accurate delay and Doppler estimation from distorted CSI by effectively suppressing Doppler mirroring ambiguity. It operates with only a single antenna at both the transmitter and receiver, making it suitable for low-complexity deployments. We propose a self-referencing cross-correlation (SRCC) method for SISO random phase removal and employ delay-domain beamforming to resolve Doppler ambiguity. The resulting unambiguous delay-Doppler-time features enable robust sensing with compact neural networks. Extensive experiments show that WiDFS 3.0 achieves accurate parameter estimation, with performance comparable to or even surpassing that of prior multi-antenna methods, especially in delay estimation. Validated under single- and multi-target scenarios, the extracted ambiguity-resolved features show strong sensing accuracy and generalization. For example, when deployed on the embedded-friendly MobileViT-XXS with only 1.3M parameters, WiDFS 3.0 consistently outperforms conventional features such as CSI amplitude, mirrored Doppler, and multi-receiver aggregated Doppler.

Jie Lei, Ruofan Jia, J. Andrew Zhang et al.

In wireless communication systems, stringent requirements such as ultra-low latency and power consumption have significantly increased the demand for efficient algorithm-to-hardware deployment. However, a persistent and substantial gap remains between algorithm design and hardware implementation. Bridging this gap traditionally requires extensive domain expertise and time-consuming manual development, due to fundamental mismatches between high-level programming languages like MATLAB and hardware description languages (HDLs) such as Verilog-in terms of memory access patterns, data processing manners, and datatype representations. To address this challenge, we propose A2HCoder: a Hierarchical Algorithm-to-HDL Coding Agent, powered by large language models (LLMs), designed to enable agile and reliable algorithm-to-hardware translation. A2HCoder introduces a hierarchical framework that enhances both robustness and interpretability while suppressing common hallucination issues in LLM-generated code. In the horizontal dimension, A2HCoder decomposes complex algorithms into modular functional blocks, simplifying code generation and improving consistency. In the vertical dimension, instead of relying on end-to-end generation, A2HCoder performs step-by-step, fine-grained translation, leveraging external toolchains such as MATLAB and Vitis HLS for debugging and circuit-level synthesis. This structured process significantly mitigates hallucinations and ensures hardware-level correctness. We validate A2HCoder through a real-world deployment case in the 5G wireless communication domain, demonstrating its practicality, reliability, and deployment efficiency.

Bai Yan, Qi Zhao, Jin Zhang et al.

Reconfigurable Intelligent Surface (RIS) is a revolutionizing approach to provide cost-effective yet energy-efficient communications. The transmit beamforming of the base station (BS) and discrete phase shifts of the RIS are jointly optimized to provide high quality of service. However, existing works ignore the high dependence between the large number of phase shifts and estimate them separately, consequently, easily getting trapped into local optima. To investigate the number and distribution of local optima, we conduct a fitness landscape analysis on the sum rate maximization problems. Two landscape features, the fitness distribution correlation and autocorrelation, are employed to investigate the ruggedness of landscape. The investigation results indicate that the landscape exhibits a rugged, multi-modal structure, i.e., has many local peaks, particularly in the cases with large-scale RISs. To handle the multi-modal landscape structure, we propose a novel niching genetic algorithm to solve the sum rate maximization problem. Particularly, a niching technique, nearest-better clustering, is incorporated to partition the population into several neighborhood species, thereby locating multiple local optima and enhance the global search ability. We also present a minimum species size to further improve the convergence speed. Simulation results demonstrate that our method achieves significant capacity gains compared to existing algorithms, particularly in the cases with large-scale RISs.

Zhongqin Wang, J. Andrew Zhang, Min Xu et al.

Device-free human tracking is an essential ingredient for ubiquitous wireless sensing. Recent passive WiFi tracking systems face the challenges of inaccurate separation of dynamic human components and time-consuming estimation of multi-dimensional signal parameters. In this work, we present a scheme named WiFi Doppler Frequency Shift (WiDFS), which can achieve single-target real-time passive tracking using channel state information (CSI) collected from commercial-off-the-shelf (COTS) WiFi devices. We consider the typical system setup including a transmitter with a single antenna and a receiver with three antennas; while our scheme can be readily extended to another setup. To remove the impact of transceiver asynchronization, we first apply CSI cross-correlation between each RX antenna pair. We then combine them to estimate a Doppler frequency shift (DFS) in a short-time window. After that, we leverage the DFS estimate to separate dynamic human components from CSI self-correlation terms of each antenna, thereby separately calculating angle-of-arrival (AoA) and human reflection distance for tracking. In addition, a hardware calibration algorithm is presented to refine the spacing between RX antennas and eliminate the hardware-related phase differences between them. A prototype demonstrates that WiDFS can achieve real-time tracking with a median position error of 72.32 cm in multipath-rich environments.

Bai Yan, Qi Zhao, Jin Zhang et al.

Gridless methods show great superiority in line spectral estimation. These methods need to solve an atomic $l_0$ norm (i.e., the continuous analog of $l_0$ norm) minimization problem to estimate frequencies and model order. Since this problem is NP-hard to compute, relaxations of atomic $l_0$ norm, such as nuclear norm and reweighted atomic norm, have been employed for promoting sparsity. However, the relaxations give rise to a resolution limit, subsequently leading to biased model order and convergence error. To overcome the above shortcomings of relaxation, we propose a novel idea of simultaneously estimating the frequencies and model order by means of the atomic $l_0$ norm. To accomplish this idea, we build a multiobjective optimization model. The measurment error and the atomic $l_0$ norm are taken as the two optimization objectives. The proposed model directly exploits the model order via the atomic $l_0$ norm, thus breaking the resolution limit. We further design a variable-length evolutionary algorithm to solve the proposed model, which includes two innovations. One is a variable-length coding and search strategy. It flexibly codes and interactively searches diverse solutions with different model orders. These solutions act as steppingstones that help fully exploring the variable and open-ended frequency search space and provide extensive potentials towards the optima. Another innovation is a model order pruning mechanism, which heuristically prunes less contributive frequencies within the solutions, thus significantly enhancing convergence and diversity. Simulation results confirm the superiority of our approach in both frequency estimation and model order selection.

Bai Yan, Qi Zhao, Jin Zhang et al.

The source number identification is an essential step in direction-of-arrival (DOA) estimation. Existing methods may provide a wrong source number due to inferior statistical properties (in low SNR or limited snapshots) or modeling errors (caused by relaxing sparse penalties), especially in impulsive noise. To address this issue, we propose a novel idea of simultaneous source number identification and DOA estimation. We formulate a multiobjective off-grid DOA estimation model to realize this idea, by which the source number can be automatically identified together with DOA estimation. In particular, the source number is properly exploited by the $l_0$ norm of impinging signals without relaxations, guaranteeing accuracy. Furthermore, we design a multiobjective bilevel evolutionary algorithm to solve the proposed model. The source number identification and sparse recovery are simultaneously optimized at the on-grid (lower) level. A forward search strategy is developed to further refine the grid at the off-grid (upper) level. This strategy does not need linear approximations and can eliminate the off-grid gap with low computational complexity. Simulation results demonstrate the outperformance of our method in terms of source number and root mean square error.