Michaël Wiertlewski

Mostafa A. Atalla, Daan van Bemmel, Jack Cummings et al.

Friction is the essential mediator of terrestrial locomotion, yet in robotic systems it is almost always treated as a passive property fixed by surface materials and conditions. Here, we introduce ultrasonic lubrication as a method to actively control friction in robotic locomotion. By exciting resonant structures at ultrasonic frequencies, contact interfaces can dynamically switch between "grip" and "slip" states, enabling locomotion. We developed two friction control modules, a cylindrical design for lumen-like environments and a flat-plate design for external surfaces, and integrated them into bio-inspired systems modeled after inchworm and wasp ovipositor locomotion. Both systems achieved bidirectional locomotion with nearly perfect locomotion efficiencies that exceeded 90%. Friction characterization experiments further demonstrated substantial friction reduction across various surfaces, including rigid, soft, granular, and biological tissue interfaces, under dry and wet conditions, and on surfaces with different levels of roughness, confirming the broad applicability of ultrasonic lubrication to locomotion tasks. These findings establish ultrasonic lubrication as a viable active friction control mechanism for robotic locomotion, with the potential to reduce design complexity and improve efficiency of robotic locomotion systems.

Rob B. N. Scharff, Dirk-Jan Boonstra, Laurence Willemet et al.

Tactile sensing can provide access to information about the contact (i.e. slippage, surface feature, friction), which is out of reach of vision but crucial for manipulation. To access this information, a dense measurement of the deformation of soft fingertips is necessary. Recently, tactile sensors that rely on a camera looking at a deformable membrane have demonstrated that a dense measurement of the contact is possible. However, their manufacturing can be time-consuming and labor-intensive. Here, we show a new design method that uses multi-color additive manufacturing and silicone casting to efficiently manufacture soft marker-based tactile sensors that are able to capture with high-resolution the three-dimensional deformation field at the interface. Each marker is composed of two superimposed color filters. The subtractive color mixing encodes the normal deformation of the membrane, and the lateral deformation is found by centroid detection. With this manufacturing method, we can reach a density of 400 markers on a 21 mm radius hemisphere, allowing for regular and dense measurement of the deformation. We calibrated and validated the approach by finding the curvature of objects with a threefold increase in accuracy as compared to previous implementations. The results demonstrate a simple yet effective approach to manufacturing artificial fingertips for capturing a rich image of the tactile interaction at the location of contact.