Girish Krishnan

Shivani Kamtikar, Kendall Koe, Justin Wasserman et al.

As robotic systems increasingly operate in unstructured, cluttered, and previously unseen environments, there is a growing need for manipulators that combine compliance, adaptability, and precise control. This work presents a real-time hybrid rigid-soft continuum manipulator system designed for robust open-world object reaching in such challenging environments. The system integrates vision-based perception and 3D scene reconstruction with shape-aware motion planning to generate safe trajectories. A learning-based controller drives the hybrid arm to arbitrary target poses, leveraging the flexibility of the soft segment while maintaining the precision of the rigid segment. The system operates without environment-specific retraining, enabling direct generalization to new scenes. Extensive real-world experiments demonstrate consistent reaching performance with errors below 2 cm across diverse cluttered setups, highlighting the potential of hybrid manipulators for adaptive and reliable operation in unstructured environments.

Sabyasachi Dash, John Golden, Girish Krishnan

In tendon driven continuum manipulators (TDCMs), reconfiguring the tendon routing enables tailored spatial deformation of the backbone. This work presents a design in which tendons can be rerouted either prior to or after actuation by actively rotating the individual spacer disks. Each disk rotation thus adds a degree of freedom to the actuation space, complicating the mapping from a desired backbone curve to the corresponding actuator inputs. However, when the backbone shape is projected into an intermediate space defined by curvature and torsion (C-T), patterns emerge that highlight which disks are most influential in achieving a global shape. This insight enables a simplified, sequential shape-matching strategy: first, the proximal and intermediate disks are rotated to approximate the global shape; then, the distal disks are adjusted to fine-tune the end-effector position with minimal impact on the overall shape. The proposed actuation framework offers a model-free alternative to conventional control approaches, bypassing the complexities of modeling reconfigurable TDCMs.

Hsin-Jung Yang, Mahsa Khosravi, Benjamin Walt et al.

Soft continuum arms (SCAs) soft and deformable nature presents challenges in modeling and control due to their infinite degrees of freedom and non-linear behavior. This work introduces a reinforcement learning (RL)-based framework for visual servoing tasks on SCAs with zero-shot sim-to-real transfer capabilities, demonstrated on a single section pneumatic manipulator capable of bending and twisting. The framework decouples kinematics from mechanical properties using an RL kinematic controller for motion planning and a local controller for actuation refinement, leveraging minimal sensing with visual feedback. Trained entirely in simulation, the RL controller achieved a 99.8% success rate. When deployed on hardware, it achieved a 67% success rate in zero-shot sim-to-real transfer, demonstrating robustness and adaptability. This approach offers a scalable solution for SCAs in 3D visual servoing, with potential for further refinement and expanded applications.

Keito Suzuki, Bang Du, Girish Krishnan et al.

3D part segmentation is still an open problem in the field of 3D vision and AR/VR. Due to limited 3D labeled data, traditional supervised segmentation methods fall short in generalizing to unseen shapes and categories. Recently, the advancement in vision-language models' zero-shot abilities has brought a surge in open-world 3D segmentation methods. While these methods show promising results for 3D scenes or objects, they do not generalize well to 3D humans. In this paper, we present the first open-vocabulary segmentation method capable of handling 3D human. Our framework can segment the human category into desired fine-grained parts based on the textual prompt. We design a simple segmentation pipeline, leveraging SAM to generate multi-view proposals in 2D and proposing a novel HumanCLIP model to create unified embeddings for visual and textual inputs. Compared with existing pre-trained CLIP models, the HumanCLIP model yields more accurate embeddings for human-centric contents. We also design a simple-yet-effective MaskFusion module, which classifies and fuses multi-view features into 3D semantic masks without complex voting and grouping mechanisms. The design of decoupling mask proposals and text input also significantly boosts the efficiency of per-prompt inference. Experimental results on various 3D human datasets show that our method outperforms current state-of-the-art open-vocabulary 3D segmentation methods by a large margin. In addition, we show that our method can be directly applied to various 3D representations including meshes, point clouds, and 3D Gaussian Splatting.

Benjamin Walt, Jordan Westphal, Girish Krishnan

Effective and efficient agricultural manipulation and harvesting depend on accurately understanding the current state of the grasp. The agricultural environment presents unique challenges due to its complexity, clutter, and occlusion. Additionally, fruit is physically attached to the plant, requiring precise separation during harvesting. Selecting appropriate sensors and modeling techniques is critical for obtaining reliable feedback and correctly identifying grasp states. This work investigates a set of key sensors, namely inertial measurement units (IMUs), infrared (IR) reflectance, tension, tactile sensors, and RGB cameras, integrated into a compliant gripper to classify grasp states. We evaluate the individual contribution of each sensor and compare the performance of two widely used classification models: Random Forest and Long Short-Term Memory (LSTM) networks. Our results demonstrate that a Random Forest classifier, trained in a controlled lab environment and tested on real cherry tomato plants, achieved 100% accuracy in identifying slip, grasp failure, and successful picks, marking a substantial improvement over baseline performance. Furthermore, we identify a minimal viable sensor combination, namely IMU and tension sensors that effectively classifies grasp states. This classifier enables the planning of corrective actions based on real-time feedback, thereby enhancing the efficiency and reliability of fruit harvesting operations.

Shivani Kamtikar, Samhita Marri, Benjamin Walt et al.

For soft continuum arms, visual servoing is a popular control strategy that relies on visual feedback to close the control loop. However, robust visual servoing is challenging as it requires reliable feature extraction from the image, accurate control models and sensors to perceive the shape of the arm, both of which can be hard to implement in a soft robot. This letter circumvents these challenges by presenting a deep neural network-based method to perform smooth and robust 3D positioning tasks on a soft arm by visual servoing using a camera mounted at the distal end of the arm. A convolutional neural network is trained to predict the actuations required to achieve the desired pose in a structured environment. Integrated and modular approaches for estimating the actuations from the image are proposed and are experimentally compared. A proportional control law is implemented to reduce the error between the desired and current image as seen by the camera. The model together with the proportional feedback control makes the described approach robust to several variations such as new targets, lighting, loads, and diminution of the soft arm. Furthermore, the model lends itself to be transferred to a new environment with minimal effort.

Seung Hyun Kim, Heng-Sheng Chang, Chia-Hsien Shih et al.

This paper is concerned with the problem of estimating (interpolating and smoothing) the shape (pose and the six modes of deformation) of a slender flexible body from multiple camera measurements. This problem is important in both biology, where slender, soft, and elastic structures are ubiquitously encountered across species, and in engineering, particularly in the area of soft robotics. The proposed mathematical formulation for shape estimation is physics-informed, based on the use of the special Cosserat rod theory whose equations encode slender body mechanics in the presence of bending, shearing, twisting and stretching. The approach is used to derive numerical algorithms which are experimentally demonstrated for fiber reinforced and cable-driven soft robot arms. These experimental demonstrations show that the methodology is accurate (<5 mm error, three times less than the arm diameter) and robust to noise and uncertainties.

Ali AlBeladi, Girish Krishnan, Mohamed-Ali Belabbas et al.

Interest in soft continuum arms has increased as their inherent material elasticity enables safe and adaptive interactions with the environment. However to achieve full autonomy in these arms, accurate three-dimensional shape sensing is needed. Vision-based solutions have been found to be effective in estimating the shape of soft continuum arms. In this paper, a vision-based shape estimator that utilizes a geometric strain based representation for the soft continuum arm's shape, is proposed. This representation reduces the dimension of the curved shape to a finite set of strain basis functions, thereby allowing for efficient optimization for the shape that best fits the observed image. Experimental results demonstrate the effectiveness of the proposed approach in estimating the end effector with accuracy less than the soft arm's radius. Multiple basis functions are also analyzed and compared for the specific soft continuum arm in use.