Nikos G. Tsagarakis

Spandan Roy, Indra Narayan Kar, Jinoh Lee et al.

In this paper, the tracking control problem of an Euler-Lagrange system is addressed with regard to parametric uncertainties, and an adaptive-robust control strategy, christened Time-Delayed Adaptive Robust Control (TARC), is presented. TARC approximates the unknown dynamics through the time-delayed estimation, and the adaptive-robust control provides robustness against the approximation error. The novel adaptation law of TARC, in contrast to the conventional adaptive-robust control methodologies, requires neither complete model of the system nor any knowledge of predefined uncertainty bounds to compute the switching gain, and circumvents the over- and underestimation problems of the switching gain. Moreover, TARC only utilizes position feedback and approximates the velocity and acceleration terms from the past position data. The adopted state-derivatives estimation method in TARC avoids any explicit requirement of external low pass filters for the removal of measurement noise. A new stability notion in continuous-time domain is proposed considering the time delay, adaptive law, and state-derivatives estimation which in turn provides a selection criterion for gains and sampling interval of the controller.

Jin Wang, Arturo Laurenzi, Nikos Tsagarakis

Enabling humanoid robots to perform autonomously loco-manipulation in unstructured environments is crucial and highly challenging for achieving embodied intelligence. This involves robots being able to plan their actions and behaviors in long-horizon tasks while using multi-modality to perceive deviations between task execution and high-level planning. Recently, large language models (LLMs) have demonstrated powerful planning and reasoning capabilities for comprehension and processing of semantic information through robot control tasks, as well as the usability of analytical judgment and decision-making for multi-modal inputs. To leverage the power of LLMs towards humanoid loco-manipulation, we propose a novel language-model based framework that enables robots to autonomously plan behaviors and low-level execution under given textual instructions, while observing and correcting failures that may occur during task execution. To systematically evaluate this framework in grounding LLMs, we created the robot 'action' and 'sensing' behavior library for task planning, and conducted mobile manipulation tasks and experiments in both simulated and real environments using the CENTAURO robot, and verified the effectiveness and application of this approach in robotic tasks with autonomous behavioral planning.

Andrea Patrizi, Carlo Rizzardo, Arturo Laurenzi et al.

We propose a contact-explicit hierarchical architecture coupling Reinforcement Learning (RL) and Model Predictive Control (MPC), where a high-level RL agent provides gait and navigation commands to a low-level locomotion MPC. This offloads the combinatorial burden of contact timing from the MPC by learning acyclic gaits through trial and error in simulation. We show that only a minimal set of rewards and limited tuning are required to obtain effective policies. We validate the architecture in simulation across robotic platforms spanning 50 kg to 120 kg and different MPC implementations, observing the emergence of acyclic gaits and timing adaptations in flat-terrain legged and hybrid locomotion, and further demonstrating extensibility to non-flat terrains. Across all platforms, we achieve zero-shot sim-to-sim transfer without domain randomization, and we further demonstrate zero-shot sim-to-real transfer without domain randomization on Centauro, our 120 kg wheeled-legged humanoid robot. We make our software framework and evaluation results publicly available at https://github.com/AndrePatri/AugMPC.

Jin Wang, Kim Tien Ly, Jacques Cloete et al.

Bridging the gap between natural language commands and autonomous execution in unstructured environments remains an open challenge for robotics. This requires robots to perceive and reason over the current task scene through multiple modalities, and to plan their behaviors to achieve their intended goals. Traditional robotic task-planning approaches often struggle to bridge low-level execution with high-level task reasoning, and cannot dynamically update task strategies when instructions change during execution, which ultimately limits their versatility and adaptability to new tasks. In this work, we propose a novel language model-based framework for dynamic robot task planning. Our Vision-Language-Policy (VLP) model, based on a vision-language model fine-tuned on real-world data, can interpret semantic instructions and integrate reasoning over the current task scene to generate behavior policies that control the robot to accomplish the task. Moreover, it can dynamically adjust the task strategy in response to changes in the task, enabling flexible adaptation to evolving task requirements. Experiments conducted with different robots and a variety of real-world tasks show that the trained model can efficiently adapt to novel scenarios and dynamically update its policy, demonstrating strong planning autonomy and cross-embodiment generalization. Videos: https://robovlp.github.io/

Jin Wang, Nikos Tsagarakis

Humanoid robots with behavioral autonomy have consistently been regarded as ideal collaborators in our daily lives and promising representations of embodied intelligence. Compared to fixed-based robotic arms, humanoid robots offer a larger operational space while significantly increasing the difficulty of control and planning. Despite the rapid progress towards general-purpose humanoid robots, most studies remain focused on locomotion ability with few investigations into whole-body coordination and tasks planning, thus limiting the potential to demonstrate long-horizon tasks involving both mobility and manipulation under open-ended verbal instructions. In this work, we propose a novel framework that learns, selects, and plans behaviors based on tasks in different scenarios. We combine reinforcement learning (RL) with whole-body optimization to generate robot motions and store them into a motion library. We further leverage the planning and reasoning features of the large language model (LLM), constructing a hierarchical task graph that comprises a series of motion primitives to bridge lower-level execution with higher-level planning. Experiments in simulation and real-world using the CENTAURO robot show that the language model based planner can efficiently adapt to new loco-manipulation tasks, demonstrating high autonomy from free-text commands in unstructured scenes.

Ioannis Dadiotis, Mayank Mittal, Nikos Tsagarakis et al.

Non-prehensile pushing to move and reorient objects to a goal is a versatile loco-manipulation skill. In the real world, the object's physical properties and friction with the floor contain significant uncertainties, which makes the task challenging for a mobile manipulator. In this paper, we develop a learning-based controller for a mobile manipulator to move an unknown object to a desired position and yaw orientation through a sequence of pushing actions. The proposed controller for the robotic arm and the mobile base motion is trained using a constrained Reinforcement Learning (RL) formulation. We demonstrate its capability in experiments with a quadrupedal robot equipped with an arm. The learned policy achieves a success rate of 91.35% in simulation and at least 80% on hardware in challenging scenarios. Through our extensive hardware experiments, we show that the approach demonstrates high robustness against unknown objects of different masses, materials, sizes, and shapes. It reactively discovers the pushing location and direction, thus achieving contact-rich behavior while observing only the pose of the object. Additionally, we demonstrate the adaptive behavior of the learned policy towards preventing the object from toppling.

Edoardo Del Bianco, Davide Torielli, Federico Rollo et al.

Modern humanoid robots have shown their promising potential for executing various tasks involving the grasping and manipulation of objects using their end-effectors. Nevertheless, in the most of the cases, the grasping and manipulation actions involve low to moderate payload and interaction forces. This is due to limitations often presented by the end-effectors, which can not match their arm-reachable payload, and hence limit the payload that can be grasped and manipulated. In addition, grippers usually do not embed adequate perception in their hardware, and grasping actions are mainly driven by perception sensors installed in the rest of the robot body, frequently affected by occlusions due to the arm motions during the execution of the grasping and manipulation tasks. To address the above, we developed a modular high grasping force gripper equipped with embedded multi-modal perception functionalities. The proposed gripper can generate a grasping force of 110 N in a compact implementation. The high grasping force capability is combined with embedded multi-modal sensing, which includes an eye-in-hand camera, a Time-of-Flight (ToF) distance sensor, an Inertial Measurement Unit (IMU) and an omnidirectional microphone, permitting the implementation of perception-driven grasping functionalities. We extensively evaluated the grasping force capacity of the gripper by introducing novel payload evaluation metrics that are a function of the robot arm's dynamic motion and gripper thermal states. We also evaluated the embedded multi-modal sensing by performing perception-guided enhanced grasping operations.

Jin Wang, Rui Dai, Weijie Wang et al.

Enabling robots to autonomously perform hybrid motions in diverse environments can be beneficial for long-horizon tasks such as material handling, household chores, and work assistance. This requires extensive exploitation of intrinsic motion capabilities, extraction of affordances from rich environmental information, and planning of physical interaction behaviors. Despite recent progress has demonstrated impressive humanoid whole-body control abilities, they struggle to achieve versatility and adaptability for new tasks. In this work, we propose HYPERmotion, a framework that learns, selects and plans behaviors based on tasks in different scenarios. We combine reinforcement learning with whole-body optimization to generate motion for 38 actuated joints and create a motion library to store the learned skills. We apply the planning and reasoning features of the large language models (LLMs) to complex loco-manipulation tasks, constructing a hierarchical task graph that comprises a series of primitive behaviors to bridge lower-level execution with higher-level planning. By leveraging the interaction of distilled spatial geometry and 2D observation with a visual language model (VLM) to ground knowledge into a robotic morphology selector to choose appropriate actions in single- or dual-arm, legged or wheeled locomotion. Experiments in simulation and real-world show that learned motions can efficiently adapt to new tasks, demonstrating high autonomy from free-text commands in unstructured scenes. Videos and website: hy-motion.github.io/

Italo Belli, Matteo Parigi Polverini, Arturo Laurenzi et al.

Hybrid wheeled-legged locomotion is a navigation paradigm only recently opened up by novel robotic designs,e.g. the centaur-type humanoid CENTAURO [1] or the quadruped ANYmal [2] in its configuration featuring non-steerable wheels. The term Hybrid Locomotion is hereafter used to indicate a particular type of locomotion, achieved with simultaneous and coordinate use of legs and wheels,see Fig. 1. Such choice stems at the intersection between legged locomotion and the simpler wheeled navigation, in order to get the best from both techniques: agility and ability to traverse uneven terrains from the first, speed and stability from the second. As a consequence, the problem of planning feasible trajectories for a hybrid robot shares many similarities with the legged locomotion problem: also in the hybrid case the motion of the base is reached through contact of the feet with the environment, taking into account that the wheeled feet can just push on the ground and not pull it. Forces compatible with friction cones have to be considered, while the contacts can slide just along the direction prescribed by the orientation of the wheels.

Matteo Parigi Polverini, Enrico Mingo Hoffman, Arturo Laurenzi et al.

The kinematic features of a centaur-type humanoid platform, combined with a powerful actuation, enable the experimentation of a variety of agile and dynamic motions. However, the higher number of degrees-of-freedom and the increased weight of the system, compared to the bipedal and quadrupedal counterparts, pose significant research challenges in terms of computational load and real implementation. To this end, this work presents a control architecture to perform agile actions, conceived for torque-controlled platforms, which decouples for computational purposes offline optimal control planning of lower-body primitives, based on a template kinematic model, and online control of the upper-body motion to maintain balance. Three stabilizing strategies are presented, whose performance is compared in two types of simulated jumps, while experimental validation is performed on a half-squat jump using the CENTAURO robot.

Dimitrios Kanoulas, Nikos G. Tsagarakis, Marsette Vona

Legged robots need to make contact with irregular surfaces, when operating in unstructured natural terrains. Representing and perceiving these areas to reason about potential contact between a robot and its surrounding environment, is still largely an open problem. This paper introduces a new framework to model and map local rough terrain surfaces, for tasks such as bipedal robot foot placement. The system operates in real-time, on data from an RGB-D and an IMU sensor. We introduce a set of parametrized patch models and an algorithm to fit them in the environment. Potential contacts are identified as bounded curved patches of approximately the same size as the robot's foot sole. This includes sparse seed point sampling, point cloud neighborhood search, and patch fitting and validation. We also present a mapping and tracking system, where patches are maintained in a local spatial map around the robot as it moves. A bio-inspired sampling algorithm is introduced for finding salient contacts. We include a dense volumetric fusion layer for spatiotemporally tracking, using multiple depth data to reconstruct a local point cloud. We present experimental results on a mini-biped robot that performs foot placements on rocks, implementing a 3D foothold perception system, that uses the developed patch mapping and tracking framework.

Tobias Klamt, Diego Rodriguez, Lorenzo Baccelliere et al.

Mobile manipulation robots have high potential to support rescue forces in disaster-response missions. Despite the difficulties imposed by real-world scenarios, robots are promising to perform mission tasks from a safe distance. In the CENTAURO project, we developed a disaster-response system which consists of the highly flexible Centauro robot and suitable control interfaces including an immersive tele-presence suit and support-operator controls on different levels of autonomy. In this article, we give an overview of the final CENTAURO system. In particular, we explain several high-level design decisions and how those were derived from requirements and extensive experience of Kerntechnische Hilfsdienst GmbH, Karlsruhe, Germany (KHG). We focus on components which were recently integrated and report about a systematic evaluation which demonstrated system capabilities and revealed valuable insights.

Anh Nguyen, Thanh-Toan Do, Ian Reid et al.

We propose V2CNet, a new deep learning framework to automatically translate the demonstration videos to commands that can be directly used in robotic applications. Our V2CNet has two branches and aims at understanding the demonstration video in a fine-grained manner. The first branch has the encoder-decoder architecture to encode the visual features and sequentially generate the output words as a command, while the second branch uses a Temporal Convolutional Network (TCN) to learn the fine-grained actions. By jointly training both branches, the network is able to model the sequential information of the command, while effectively encodes the fine-grained actions. The experimental results on our new large-scale dataset show that V2CNet outperforms recent state-of-the-art methods by a substantial margin, while its output can be applied in real robotic applications. The source code and trained models will be made available.

Jiatao Ding, Chengxu Zhou, Songyan Xin et al.

Human beings can utilize multiple balance strategies, e.g. step location adjustment and angular momentum adaptation, to maintain balance when walking under dynamic disturbances. In this work, we propose a novel Nonlinear Model Predictive Control (NMPC) framework for robust locomotion, with the capabilities of step location adjustment, Center of Mass (CoM) height variation, and angular momentum adaptation. These features are realized by constraining the Zero Moment Point within the support polygon. By using the nonlinear inverted pendulum plus flywheel model, the effects of upper-body rotation and vertical height motion are considered. As a result, the NMPC is formulated as a quadratically constrained quadratic program problem, which is solved fast by sequential quadratic programming. Using this unified framework, robust walking patterns that exploit reactive stepping, body inclination, and CoM height variation are generated based on the state estimation. The adaptability for bipedal walking in multiple scenarios has been demonstrated through simulation studies.

Anh Nguyen, Thanh-Toan Do, Ian Reid et al.

We address the problem of jointly learning vision and language to understand the object in a fine-grained manner. The key idea of our approach is the use of object descriptions to provide the detailed understanding of an object. Based on this idea, we propose two new architectures to solve two related problems: object captioning and natural language-based object retrieval. The goal of the object captioning task is to simultaneously detect the object and generate its associated description, while in the object retrieval task, the goal is to localize an object given an input query. We demonstrate that both problems can be solved effectively using hybrid end-to-end CNN-LSTM networks. The experimental results on our new challenging dataset show that our methods outperform recent methods by a fair margin, while providing a detailed understanding of the object and having fast inference time. The source code will be made available.

Dimitrios Kanoulas, Jinoh Lee, Darwin G. Caldwell et al.

Lifting objects, whose mass may produce high wrist torques that exceed the hardware strength limits, could lead to unstable grasps or serious robot damage. This work introduces a new Center-of-Mass (CoM)-based grasp pose adaptation method, for picking up objects using a combination of exteroceptive 3D perception and proprioceptive force/torque sensor feedback. The method works in two iterative stages to provide reliable and wrist torque efficient grasps. Initially, a geometric object CoM is estimated from the input range data. In the first stage, a set of hand-size handle grasps are localized on the object and the closest to its CoM is selected for grasping. In the second stage, the object is lifted using a single arm, while the force and torque readings from the sensor on the wrist are monitored. Based on these readings, a displacement to the new CoM estimation is calculated. The object is released and the process is repeated until the wrist torque effort is minimized. The advantage of our method is the blending of both exteroceptive (3D range) and proprioceptive (force/torque) sensing for finding the grasp location that minimizes the wrist effort, potentially improving the reliability of the grasping and the subsequent manipulation task. We experimentally validate the proposed method by executing a number of tests on a set of objects that include handles, using the humanoid robot WALK-MAN.

Anh Nguyen, Thanh-Toan Do, Darwin G. Caldwell et al.

We present a new method to relocalize the 6DOF pose of an event camera solely based on the event stream. Our method first creates the event image from a list of events that occurs in a very short time interval, then a Stacked Spatial LSTM Network (SP-LSTM) is used to learn the camera pose. Our SP-LSTM is composed of a CNN to learn deep features from the event images and a stack of LSTM to learn spatial dependencies in the image feature space. We show that the spatial dependency plays an important role in the relocalization task and the SP-LSTM can effectively learn this information. The experimental results on a publicly available dataset show that our approach generalizes well and outperforms recent methods by a substantial margin. Overall, our proposed method reduces by approx. 6 times the position error and 3 times the orientation error compared to the current state of the art. The source code and trained models will be released.