Yili Ren

Yili Ren, Jie Yang

This paper presents GoPose, a 3D skeleton-based human pose estimation system that uses WiFi devices at home. Our system leverages the WiFi signals reflected off the human body for 3D pose estimation. In contrast to prior systems that need specialized hardware or dedicated sensors, our system does not require a user to wear or carry any sensors and can reuse the WiFi devices that already exist in a home environment for mass adoption. To realize such a system, we leverage the 2D AoA spectrum of the signals reflected from the human body and the deep learning techniques. In particular, the 2D AoA spectrum is proposed to locate different parts of the human body as well as to enable environment-independent pose estimation. Deep learning is incorporated to model the complex relationship between the 2D AoA spectrums and the 3D skeletons of the human body for pose tracking. Our evaluation results show GoPose achieves around 4.7cm of accuracy under various scenarios including tracking unseen activities and under NLoS scenarios.

Yili Ren, Shiqi Wen, Li Hou et al.

Grain-edge segmentation (GES) and lithology semantic segmentation (LSS) are two pivotal tasks for quantifying rock fabric and composition. However, these two tasks are often treated separately, and the segmentation quality is implausible albeit expensive, time-consuming, and expert-annotated datasets have been used. Recently, foundation models, especially the Segment Anything Model (SAM), have demonstrated impressive robustness for boundary alignment. However, directly adapting SAM to joint GES and LSS is nontrivial due to 1) severe domain gap induced by extinction-dependent color variations and ultra-fine grain boundaries, and 2) lacking novel modules for joint learning on multi-angle petrographic image stacks. In this paper, we propose Petro-SAM, a novel two-stage, multi-task framework that can achieve high-quality joint GES and LSS on petrographic images. Specifically, based on SAM, we introduce a Merge Block to integrate seven polarized views, effectively solving the extinction issue. Moreover, we introduce multi-scale feature fusion and color-entropy priors to refine the detection.

Yili Ren, Jie Yang

Person re-identification (Re-ID) has become increasingly important as it supports a wide range of security applications. Traditional person Re-ID mainly relies on optical camera-based systems, which incur several limitations due to the changes in the appearance of people, occlusions, and human poses. In this work, we propose a WiFi vision-based system, 3D-ID, for person Re-ID in 3D space. Our system leverages the advances of WiFi and deep learning to help WiFi devices see, identify, and recognize people. In particular, we leverage multiple antennas on next-generation WiFi devices and 2D AoA estimation of the signal reflections to enable WiFi to visualize a person in the physical environment. We then leverage deep learning to digitize the visualization of the person into 3D body representation and extract both the static body shape and dynamic walking patterns for person Re-ID. Our evaluation results under various indoor environments show that the 3D-ID system achieves an overall rank-1 accuracy of 85.3%. Results also show that our system is resistant to various attacks. The proposed 3D-ID is thus very promising as it could augment or complement camera-based systems.

Haotang Li, Yili Ren, Zhenyu Qi et al.

Body fat percentage and its spatial distribution are clinically important health indicators. However, existing measurement methods often impose a tradeoff between accuracy and accessibility. Clinical-grade techniques, such as Dual-Energy X-ray Absorptiometry (DEXA) and hydrostatic weighing, provide accurate measurements but require specialized equipment and trained operators, making them difficult to access and unsuitable for everyday use. In contrast, consumer-level methods, such as Bioelectrical Impedance Analysis (BIA) smart scales and skinfold calipers, are more accessible but typically provide only coarse-grained estimates, are prone to user error, or require intrusive physical contact. In this work, we present UWB-Fat, the first system that leverages commodity ultra-wideband (UWB) radar to enable non-intrusive, accessible, and accurate caliper-equivalent skinfold thickness estimation, serving as a convenient replacement for the skinfold caliper. UWB-Fat collects UWB signal at specified body sites non-intrusively without operator assistance. It extracts body-composition-related features from UWB signals by exploiting dielectric contrasts among skin, fat, and muscle tissues. Then, it uses a physics-inspired model to estimate site-specific skinfold thickness. We evaluate UWB-Fat on 15 participants, achieving a root mean square error of 0.63~mm for pooled-site subcutaneous fat thickness. These results highlight the potential of UWB-Fat to support low-cost, self-administered, and everyday body fat monitoring.

Haopeng Zhang, Yili Ren, Haohan Yuan et al.

Recent advancements in Large Language Models (LLMs) have demonstrated remarkable capabilities across diverse tasks. However, their potential to integrate physical model knowledge for real-world signal interpretation remains largely unexplored. In this work, we introduce Wi-Chat, the first LLM-powered Wi-Fi-based human activity recognition system. We demonstrate that LLMs can process raw Wi-Fi signals and infer human activities by incorporating Wi-Fi sensing principles into prompts. Our approach leverages physical model insights to guide LLMs in interpreting Channel State Information (CSI) data without traditional signal processing techniques. Through experiments on real-world Wi-Fi datasets, we show that LLMs exhibit strong reasoning capabilities, achieving zero-shot activity recognition. These findings highlight a new paradigm for Wi-Fi sensing, expanding LLM applications beyond conventional language tasks and enhancing the accessibility of wireless sensing for real-world deployments.

Jingzhe Zhang, Yitong Shen, Ning Wang et al.

With the rapid evolution of wireless technologies, Wi-Fi has expanded beyond its original role in data transmission to support various emerging applications, particularly in physical-layer security, including device authentication, user authentication, and secret key generation. Despite extensive research on Wi-Fi Channel State Information (CSI)-based physical-layer security, its vulnerabilities remain largely unexplored. In this work, we propose BFIAttack, a novel attack that exploits Beamforming Feedback Information (BFI) to reconstruct the CSI of a legitimate user or device, thereby compromising Wi-Fi-based physical-layer security. We realize the attack by leveraging a closed-form CSI reconstruction method for the single-antenna station scenario and a maximum likelihood estimation-based CSI reconstruction for the multi-antenna station scenario. Moreover, we exploit spatial similarities among antenna pairs to refine the reconstructed CSI and enhance attack effectiveness. Experimental results show that BFIAttack achieves an average attack success rate of $73\%$ in multi-antenna station scenarios with no more than five attack attempts, and over $93\%$ in single-antenna station scenarios with only a single attempt. BFIAttack reveals critical vulnerabilities in existing Wi-Fi-based physical-layer security.

Haotang Li, Zhenyu Qi, Sen He et al.

Improper sitting posture during prolonged computer use has become a significant public health concern. Traditional posture monitoring solutions face substantial barriers, including privacy concerns with camera-based systems and user discomfort with wearable sensors. This paper presents UWB-PostureGuard, a privacy-preserving ultra-wideband (UWB) sensing system that advances mobile technologies for preventive health management through continuous, contactless monitoring of ergonomic sitting posture. Our system leverages commercial UWB devices, utilizing comprehensive feature engineering to extract multiple ergonomic sitting posture features. We develop PoseGBDT to effectively capture temporal dependencies in posture patterns, addressing limitations of traditional frame-wise classification approaches. Extensive real-world evaluation across 10 participants and 19 distinct postures demonstrates exceptional performance, achieving 99.11% accuracy while maintaining robustness against environmental variables such as clothing thickness, additional devices, and furniture configurations. Our system provides a scalable, privacy-preserving mobile health solution on existing platforms for proactive ergonomic management, improving quality of life at low costs.

Yili Ren, Jie Yang

WiFi human sensing has become increasingly attractive in enabling emerging human-computer interaction applications. The corresponding technique has gradually evolved from the classification of multiple activity types to more fine-grained tracking of 3D human poses. However, existing WiFi-based 3D human pose tracking is limited to a set of predefined activities. In this work, we present Winect, a 3D human pose tracking system for free-form activity using commodity WiFi devices. Our system tracks free-form activity by estimating a 3D skeleton pose that consists of a set of joints of the human body. In particular, we combine signal separation and joint movement modeling to achieve free-form activity tracking. Our system first identifies the moving limbs by leveraging the two-dimensional angle of arrival of the signals reflected off the human body and separates the entangled signals for each limb. Then, it tracks each limb and constructs a 3D skeleton of the body by modeling the inherent relationship between the movements of the limb and the corresponding joints. Our evaluation results show that Winect is environment-independent and achieves centimeter-level accuracy for free-form activity tracking under various challenging environments including the none-line-of-sight (NLoS) scenarios.

Yili Ren, Jie Yang

The popularity of Internet-of-Things (IoT) has provided us with unprecedented opportunities to enable a variety of emerging services in a smart home environment. Among those services, sensing the liquid level in a container is critical to building many smart home and mobile healthcare applications that improve the quality of life. This paper presents LiquidSense, a liquid-level sensing system that is low-cost, high accuracy, widely applicable to different daily liquids and containers, and can be easily integrated with existing smart home networks. LiquidSense uses an existing home WiFi network and a low-cost transducer that attached to the container to sense the resonance of the container for liquid level detection. In particular, our system mounts a low-cost transducer on the surface of the container and emits a well-designed chirp signal to make the container resonant, which introduces subtle changes to the home WiFi signals. By analyzing the subtle phase changes of the WiFi signals, LiquidSense extracts the resonance frequency as a feature for liquid level detection. Our system constructs prediction models for both continuous and discrete predictions using curve fitting and SVM respectively. We evaluate LiquidSense in home environments with containers of three different materials and six types of liquids. Results show that LiquidSense achieves an overall accuracy of 97% for continuous prediction and an overall F-score of 0.968 for discrete prediction. Results also show that our system has a large coverage in a home environment and works well under non-line-of-sight (NLOS) scenarios.