Alexis A. Dowhuszko

Boxuan Xie, Lauri Mela, Alexis A. Dowhuszko et al.

In next-generation wireless systems, providing location-based mobile computing services for energy-neutral devices has become a crucial objective for the provision of sustainable Internet of Things (IoT). Visible light positioning (VLP) has gained great research attention as a complementary method to radio frequency (RF) solutions since it can leverage ubiquitous lighting infrastructure. However, conventional VLP receivers often rely on photodetectors or cameras that are power-hungry, complex, and expensive. To address this challenge, we propose a hybrid indoor asset tracking system that integrates visible light communication (VLC) and backscatter communication (BC) within a simultaneous lightwave information and power transfer (SLIPT) framework. We design a low-complexity and energy-neutral IoT node, namely backscatter device (BD) which harvests energy from light-emitting diode (LED) access points, and then modulates and reflects ambient RF carriers to indicate its location within particular VLC cells. We present a multi-cell VLC deployment with frequency division multiplexing (FDM) method that mitigates interference among LED access points by assigning them distinct frequency pairs based on a four-color map scheduling principle. We develop a lightweight particle filter (PF) tracking algorithm at an edge RF reader, where the fusion of proximity reports and the received backscatter signal strength are employed to track the BD. Experimental results show that this approach achieves the positioning error of 0.318 m at 50th percentile and 0.634 m at 90th percentile, while avoiding the use of complex photodetectors and active RF synthesizing components at the energy-neutral IoT node. By demonstrating robust performance in multiple indoor trajectories, the proposed solution enables scalable, cost-effective, and energy-neutral indoor tracking for pervasive and edge-assisted IoT applications.

Boxuan Xie, Yifan Zhang, Kalle Koskinen et al.

The rapid growth of the Internet of Things (IoT) devices in the sixth generation (6G) wireless networks raises significant sustainability and scalability challenges due to energy consumption, deployment complexity, and environmental impact. Ambient IoT (A-IoT), leveraging ambient energy harvesting (EH) for batteryless device operation, has emerged as a promising solution to address these challenges. Among various EH and communication techniques, visible light communication (VLC) integrated with ambient backscatter communication (AmBC) offers remarkable advantages, including energy neutrality, high reliability, and enhanced security. In this article, we propose a joint VLC-AmBC architecture, emphasizing fundamental concepts, system designs, and practical implementations. We explore potential applications in environmental monitoring, healthcare, smart logistics, and secure communications. We present proof-of-concept demonstrations for three distinct types of ambient backscatter devices (AmBDs): EH-Only, VLC-Relay, and VLC-Control. Experimental results demonstrate the feasibility of implementing joint VLC-AmBC systems, highlighting their practical viability across various deployment scenarios. Finally, we outline future research directions, including integrated sensing and communication, as well as optimized energy-efficient deployment. Open issues, such as large-scale deployment challenges, are also discussed, thereby providing a clear roadmap for future developments in joint VLC-AmBC-enabled A-IoT ecosystems.

Mehmet C. Ilter, Alexis A. Dowhuszko, Jyri Hämäläinen et al.

Visible Light Communication~(VLC) systems provide not only illumination and data communication, but also indoor monitoring services if the effect that different events create on the received optical signal is properly tracked. For this purpose, the Channel State Information that a VLC receiver computes to equalize the subcarriers of the OFDM signal can be also reused to train an Unsupervised Learning classifier. This way, different clusters can be created on the collected CSI data, which could be then mapped into relevant events to-be-monitored in the indoor environments, such as the presence of a new object in a given position or the change of the position of a given object. When compared to supervised learning algorithms, the proposed approach does not need to add tags in the training data, simplifying notably the implementation of the machine learning classifier. The practical validation the monitoring approach was done with the aid of a software-defined VLC link based on OFDM, in which a copy of the intensity modulated signal coming from a Phosphor-converted LED was captured by a pair of Photodetectors~(PDs). The performance evaluation of the experimental VLC-based monitoring demo achieved a positioning accuracy in the few-centimeter-range, without the necessity of deploying a large number of sensors and/or adding a VLC-enabled sensor on the object to-be-tracked.