Xiaqing Ding

Xiaqing Ding, Xuecheng Xu, Sha Lu et al.

Global point cloud registration is an essential module for localization, of which the main difficulty exists in estimating the rotation globally without initial value. With the aid of gravity alignment, the degree of freedom in point cloud registration could be reduced to 4DoF, in which only the heading angle is required for rotation estimation. In this paper, we propose a fast and accurate global heading angle estimation method for gravity-aligned point clouds. Our key idea is that we generate a translation invariant representation based on Radon Transform, allowing us to solve the decoupled heading angle globally with circular cross-correlation. Besides, for heading angle estimation between point clouds with different distributions, we implement this heading angle estimator as a differentiable module to train a feature extraction network end- to-end. The experimental results validate the effectiveness of the proposed method in heading angle estimation and show better performance compared with other methods.

Xuecheng Xu, Yanmei Jiao, Sha Lu et al.

This paper investigates the advantages of using Bird's Eye View (BEV) representation in 360-degree visual place recognition (VPR). We propose a novel network architecture that utilizes the BEV representation in feature extraction, feature aggregation, and vision-LiDAR fusion, which bridges visual cues and spatial awareness. Our method extracts image features using standard convolutional networks and combines the features according to pre-defined 3D grid spatial points. To alleviate the mechanical and time misalignments between cameras, we further introduce deformable attention to learn the compensation. Upon the BEV feature representation, we then employ the polar transform and the Discrete Fourier transform for aggregation, which is shown to be rotation-invariant. In addition, the image and point cloud cues can be easily stated in the same coordinates, which benefits sensor fusion for place recognition. The proposed BEV-based method is evaluated in ablation and comparative studies on two datasets, including on-the-road and off-the-road scenarios. The experimental results verify the hypothesis that BEV can benefit VPR by its superior performance compared to baseline methods. To the best of our knowledge, this is the first trial of employing BEV representation in this task.

Yanmei Jiao, Lilu Liu, Bo Fu et al.

Visual localization for planar moving robot is important to various indoor service robotic applications. To handle the textureless areas and frequent human activities in indoor environments, a novel robust visual localization algorithm which leverages dense correspondence and sparse depth for planar moving robot is proposed. The key component is a minimal solution which computes the absolute camera pose with one 3D-2D correspondence and one 2D-2D correspondence. The advantages are obvious in two aspects. First, the robustness is enhanced as the sample set for pose estimation is maximal by utilizing all correspondences with or without depth. Second, no extra effort for dense map construction is required to exploit dense correspondences for handling textureless and repetitive texture scenes. That is meaningful as building a dense map is computational expensive especially in large scale. Moreover, a probabilistic analysis among different solutions is presented and an automatic solution selection mechanism is designed to maximize the success rate by selecting appropriate solutions in different environmental characteristics. Finally, a complete visual localization pipeline considering situations from the perspective of correspondence and depth density is summarized and validated on both simulation and public real-world indoor localization dataset. The code is released on github.

Xiaqing Ding, Yue Wang, Li Tang et al.

Visual localization occupies an important position in many areas such as Augmented Reality, robotics and 3D reconstruction. The state-of-the-art visual localization methods perform pose estimation using geometry based solver within the RANSAC framework. However, these methods require accurate pixel-level matching at high image resolution, which is hard to satisfy under significant changes from appearance, dynamics or perspective of view. End-to-end learning based regression networks provide a solution to circumvent the requirement for precise pixel-level correspondences, but demonstrate poor performance towards cross-scene generalization. In this paper, we explicitly add a learnable matching layer within the network to isolate the pose regression solver from the absolute image feature values, and apply dimension regularization on both the correlation feature channel and the image scale to further improve performance towards generalization and large viewpoint change. We implement this dimension regularization strategy within a two-layer pyramid based framework to regress the localization results from coarse to fine. In addition, the depth information is fused for absolute translational scale recovery. Through experiments on real world RGBD datasets we validate the effectiveness of our design in terms of improving both generalization performance and robustness towards viewpoint change, and also show the potential of regression based visual localization networks towards challenging occasions that are difficult for geometry based visual localization methods.

Bo Fu, Yue Wang, Xiaqing Ding et al.

LiDAR-camera calibration is a precondition for many heterogeneous systems that fuse data from LiDAR and camera. However, the constraint from common field of view and the requirement for strict time synchronization make the calibration a challenging problem. In this paper, we propose a novel LiDAR-camera calibration method aiming to eliminate these two constraints. Specifically, we capture a scan of 3D LiDAR when both the environment and the sensors are stationary, then move the camera to reconstruct the 3D environment using the sequentially obtained images. Finally, we align 3D visual points to the laser scan based on tightly couple graph optimization method to calculate the extrinsic parameters between LiDAR and camera. Under this design, the configuration of these two sensors are free from the common field of view constraint owing to the extended view from the moving camera. And we also eliminate the requirement for strict time synchronization as we only use the single scan of laser data when the sensors are stationary. We theoretically derive the conditions of minimal observability for our method and prove that the accuracy of calibration is improved by collecting more observations from multiple scattered calibration targets. We validate our method on both simulation platform and real-world datasets. Experiments show that our method achieves higher accuracy than other comparable methods, which is in accordance with our theoretical analysis. In addition, the proposed method is beneficial to not only plane measurement error based chessboard, but also other point measurement error based calibration targets, such as boxes and polygonal boards.

Xiaqing Ding, Yue Wang, Li Tang et al.

Visual localization is one of the primary capabilities for mobile robots. Long-term visual localization in real time is particularly challenging, in which the robot is required to efficiently localize itself using visual data where appearance may change significantly over time. In this paper, we propose a cloud-based visual localization system targeting at long-term localization in real time. On the robot, we employ two estimators to achieve accurate and real-time performance. One is a sliding-window based visual inertial odometry, which integrates constraints from consecutive observations and self-motion measurements, as well as the constraints induced by localization on the cloud. This estimator builds a local visual submap as the virtual observation which is then sent to the cloud as new localization constraints. The other one is a delayed state Extended Kalman Filter to fuse the pose of the robot localized from the cloud, the local odometry and the high-frequency inertial measurements. On the cloud, we propose a longer sliding-window based localization method to aggregate the virtual observations for larger field of view, leading to more robust alignment between virtual observations and the map. Under this architecture, the robot can achieve drift-free and real-time localization using onboard resources even in a network with limited bandwidth, high latency and existence of package loss, which enables the autonomous navigation in real-world environment. We evaluate the effectiveness of our system on a dataset with challenging seasonal and illuminative variations. We further validate the robustness of the system under challenging network conditions.

Yanmei Jiao, Yue Wang, Bo Fu et al.

Visual localization has attracted considerable attention due to its low-cost and stable sensor, which is desired in many applications, such as autonomous driving, inspection robots and unmanned aerial vehicles. However, current visual localization methods still struggle with environmental changes across weathers and seasons, as there is significant appearance variation between the map and the query image. The crucial challenge in this situation is that the percentage of outliers, i.e. incorrect feature matches, is high. In this paper, we derive minimal closed form solutions for 3D-2D localization with the aid of inertial measurements, using only 2 pairs of point matches or 1 pair of point match and 1 pair of line match. These solutions are further utilized in the proposed 2-entity RANSAC, which is more robust to outliers as both line and point features can be used simultaneously and the number of matches required for pose calculation is reduced. Furthermore, we introduce three feature sampling strategies with different advantages, enabling an automatic selection mechanism. With the mechanism, our 2-entity RANSAC can be adaptive to the environments with different distribution of feature types in different segments. Finally, we evaluate the method on both synthetic and real-world datasets, validating its performance and effectiveness in inter-session scenarios.

Xiaqing Ding, Yue Wang, Huan Yin et al.

Map construction in large scale outdoor environment is of importance for robots to robustly fulfill their tasks. Massive sessions of data should be merged to distinguish low dynamics in the map, which otherwise might debase the performance of localization and navigation algorithms. In this paper we propose a method for multi-session map construction in large scale outdoor environment using 3D LiDAR. To efficiently align the maps from different sessions, a laser-based loop closure detection method is integrated and the sequential information within the submaps is utilized for higher robustness. Furthermore, a dynamic detection method is proposed to detect dynamics in the overlapping areas among sessions of maps. We test the method in the real-world environment with a VLP-16 Velodyne LiDAR and the experimental results prove the validity and robustness of the proposed method.

Xiaqing Ding, Yue Wang, Dongxuan Li et al.

Long-term visual localization in outdoor environment is a challenging problem, especially faced with the cross-seasonal, bi-directional tasks and changing environment. In this paper we propose a novel visual inertial localization framework that localizes against the LiDAR-built map. Based on the geometry information of the laser map, a hybrid bundle adjustment framework is proposed, which estimates the poses of the cameras with respect to the prior laser map as well as optimizes the state variables of the online visual inertial odometry system simultaneously. For more accurate cross-modal data association, the laser map is optimized using multi-session laser and visual data to extract the salient and stable subset for localization. To validate the efficiency of the proposed method, we collect data in south part of our campus in different seasons, along the same and opposite-direction route. In all sessions of localization data, our proposed method gives satisfactory results, and shows the superiority of the hybrid bundle adjustment and map optimization.

Huan Yin, Li Tang, Xiaqing Ding et al.

Global localization in 3D point clouds is a challenging problem of estimating the pose of vehicles without any prior knowledge. In this paper, a solution to this problem is presented by achieving place recognition and metric pose estimation in the global prior map. Specifically, we present a semi-handcrafted representation learning method for LiDAR point clouds using siamese LocNets, which states the place recognition problem to a similarity modeling problem. With the final learned representations by LocNet, a global localization framework with range-only observations is proposed. To demonstrate the performance and effectiveness of our global localization system, KITTI dataset is employed for comparison with other algorithms, and also on our long-time multi-session datasets for evaluation. The result shows that our system can achieve high accuracy.