Francesco Linsalata

Lorenzo Cazzella, Francesco Linsalata, Maurizio Magarini et al.

Digital Twins (DTs) for physical wireless environments have been recently proposed as accurate virtual representations of the propagation environment that can enable multi-layer decisions at the physical communication equipment. At high-frequency bands, DTs can help to overcome the challenges emerging in high mobility conditions featuring vehicular environments. In this paper, we propose a novel data-driven workflow for the creation of the DT of a Vehicle-to-Everything (V2X) communication scenario and a multi-modal simulation framework for the generation of realistic sensor data and accurate mmWave/sub-THz wireless channels. The proposed method leverages an automotive simulation and testing framework and an accurate ray-tracing channel simulator. Simulations over an urban scenario show the achievable realistic sensor and channel modelling both at the infrastructure and at ego-vehicles. We showcase the proposed framework on the DT-aided blockage handover task for V2X link restoration, leveraging the framework's dynamic channel generation capabilities for realistic vehicular blockage simulation.

Roberto Pegurri, Diego Gasco, Francesco Linsalata et al.

This paper presents VaN3Twin-the first open-source, full-stack Network Digital Twin (NDT) framework for simulating the coexistence of multiple Vehicle-to-Everything (V2X) communication technologies with accurate physical-layer modeling via ray tracing. VaN3Twin extends the ms-van3t simulator by integrating Sionna Ray Tracer (RT) in the loop, enabling high-fidelity representation of wireless propagation, including diverse Line-of-Sight (LoS) conditions with focus on LoS blockage due to other vehicles' meshes, Doppler effect, and site-dependent effects-e.g., scattering and diffraction. Unlike conventional simulation tools, the proposed framework supports realistic coexistence analysis across DSRC and C-V2X technologies operating over shared spectrum. A dedicated interference tracking module captures cross-technology interference at the time-frequency resource block level and enhances signal-to-interference-plus-noise ratio (SINR) estimation by eliminating artifacts such as the bimodal behavior induced by separate LoS/NLoS propagation models. Compared to field measurements, VaN3Twin reduces application-layer disagreement by 50% in rural and over 70% in urban environments with respect to current state-of-the-art simulation tools, demonstrating its value for scalable and accurate digital twin-based V2X coexistence simulation.

Roberto Pegurri, Habu Shintaro, Francesco Linsalata et al.

Emerging safety-critical Vehicle-to-Everything (V2X) applications require networks to proactively adapt to rapid environmental changes rather than merely reacting to them. While Network Digital Twins (NDTs) offer a pathway to such predictive capabilities, existing solutions typically struggle to reconcile high-fidelity physical modeling with strict real-time constraints. This paper presents a novel, end-to-end real-time V2X Digital Twin framework that integrates live mobility tracking with deterministic channel simulation. By coupling the Tokyo Mobility Digital Twin-which provides live sensing and trajectory forecasting-with VaN3Twin-a full-stack simulator with ray tracing-we enable the prediction of network performance before physical events occur. We validate this approach through an experimental proof-of-concept deployed in Tokyo, Japan, featuring connected vehicles operating on 60 GHz links. Our results demonstrate the system's ability to predict Received Signal Strength (RSSI) with a maximum average error of 1.01 dB and reliably forecast Line-of-Sight (LoS) transitions within a maximum average end-to-end system latency of 250 ms, depending on the ray tracing level of detail. Furthermore, we quantify the fundamental trade-offs between digital model fidelity, computational latency, and trajectory prediction horizons, proving that high-fidelity and predictive digital twins are feasible in real-world urban environments.

Antonio Coviello, Francesco Linsalata, Umberto Spagnolini et al.

Neuropathies are gaining higher relevance in clinical settings, as they risk permanently jeopardizing a person's life. To support the recovery of patients, the use of fully implanted devices is emerging as one of the most promising solutions. However, these devices, even if becoming an integral part of a fully complex neural nanonetwork system, pose numerous challenges. In this article, we address one of them, which consists of the classification of motor/sensory stimuli. The task is performed by exploring four different types of artificial neural networks (ANNs) to extract various sensory stimuli from the electroneurographic (ENG) signal measured in the sciatic nerve of rats. Different sizes of the data sets are considered to analyze the feasibility of the investigated ANNs for real-time classification through a comparison of their performance in terms of accuracy, F1-score, and prediction time. The design of the ANNs takes advantage of the modelling of the ENG signal as a multiple-input multiple-output (MIMO) system to describe the measures taken by state-of-the-art implanted nerve interfaces. These are based on the use of multi-contact cuff electrodes to achieve nanoscale spatial discrimination of the nerve activity. The MIMO ENG signal model is another contribution of this paper. Our results show that some ANNs are more suitable for real-time applications, being capable of achieving accuracies over $90\%$ for signal windows of $100$ and $200\,$ms with a low enough processing time to be effective for pathology recovery.

Lorenzo Cazzella, Francesco Linsalata, Mahdi Maleki et al.

Wireless communication systems can significantly benefit from the availability of spatially consistent representations of the wireless channel to efficiently perform a wide range of communication tasks. Towards this purpose, channel charting has been introduced as an effective unsupervised learning technique to achieve both locally and globally consistent radio maps. In this letter, we propose Chartwin, a case study on the integration of localization-oriented channel charting with dynamic Digital Network Twins (DNTs). Numerical results showcase the significant performance of semi-supervised channel charting in constructing a spatially consistent chart of the considered extended urban environment. The considered method results in $\approx$ 4.5 m localization error for the static DNT and $\approx$ 6 m in the dynamic DNT, fostering DNT-aided channel charting and localization.