Dongyuan Shi

Zhengding Luo, Dongyuan Shi, Woon-Seng Gan

The selective fixed-filter active noise control (SFANC) method selecting the best pre-trained control filters for various types of noise can achieve a fast response time. However, it may lead to large steady-state errors due to inaccurate filter selection and the lack of adaptability. In comparison, the filtered-X normalized least-mean-square (FxNLMS) algorithm can obtain lower steady-state errors through adaptive optimization. Nonetheless, its slow convergence has a detrimental effect on dynamic noise attenuation. Therefore, this paper proposes a hybrid SFANC-FxNLMS approach to overcome the adaptive algorithm's slow convergence and provide a better noise reduction level than the SFANC method. A lightweight one-dimensional convolutional neural network (1D CNN) is designed to automatically select the most suitable pre-trained control filter for each frame of the primary noise. Meanwhile, the FxNLMS algorithm continues to update the coefficients of the chosen pre-trained control filter at the sampling rate. Owing to the effective combination of the two algorithms, experimental results show that the hybrid SFANC-FxNLMS algorithm can achieve a rapid response time, a low noise reduction error, and a high degree of robustness.

Zhengding Luo, Dongyuan Shi, Xiaoyi Shen et al.

Due to the slow convergence and poor tracking ability, conventional LMS-based adaptive algorithms are less capable of handling dynamic noises. Selective fixed-filter active noise control (SFANC) can significantly reduce response time by selecting appropriate pre-trained control filters for different noises. Nonetheless, the limited number of pre-trained control filters may affect noise reduction performance, especially when the incoming noise differs much from the initial noises during pre-training. Therefore, a generative fixed-filter active noise control (GFANC) method is proposed in this paper to overcome the limitation. Based on deep learning and a perfect-reconstruction filter bank, the GFANC method only requires a few prior data (one pre-trained broadband control filter) to automatically generate suitable control filters for various noises. The efficacy of the GFANC method is demonstrated by numerical simulations on real-recorded noises.

Zhengding Luo, Dongyuan Shi, Woon-Seng Gan

Due to its rapid response time and a high degree of robustness, the selective fixed-filter active noise control (SFANC) method appears to be a viable candidate for widespread use in a variety of practical active noise control (ANC) systems. In comparison to conventional fixed-filter ANC methods, SFANC can select the pre-trained control filters for different types of noise. Deep learning technologies, thus, can be used in SFANC methods to enable a more flexible selection of the most appropriate control filters for attenuating various noises. Furthermore, with the assistance of a deep neural network, the selecting strategy can be learned automatically from noise data rather than through trial and error, which significantly simplifies and improves the practicability of ANC design. Therefore, this paper investigates the performance of SFANC based on different one-dimensional and two-dimensional convolutional neural networks. Additionally, we conducted comparative analyses of several network training strategies and discovered that fine-tuning could improve selection performance.

Ziyi Yang, Li Rao, Zhengding Luo et al.

Active noise control (ANC) must adapt quickly when the acoustic environment changes, yet early performance is largely dictated by initialization. We address this with a Model-Agnostic Meta-Learning (MAML) co-initialization that jointly sets the control filter and the secondary-path model for FxLMS-based ANC while keeping the runtime algorithm unchanged. The initializer is pre-trained on a small set of measured paths using short two-phase inner loops that mimic identification followed by residual-noise reduction, and is applied by simply setting the learned initial coefficients. In an online secondary path modeling FxLMS testbed, it yields lower early-stage error, shorter time-to-target, reduced auxiliary-noise energy, and faster recovery after path changes than a baseline without re-initialization. The method provides a simple fast start for feedforward ANC under environment changes, requiring a small set of paths to pre-train.

Zhengding Luo, Haozhe Ma, Boxiang Wang et al.

The Filtered-x Normalized Least Mean Square (FxNLMS) algorithm suffers from slow convergence and a risk of divergence, although it can achieve low steady-state errors after sufficient adaptation. In contrast, the Generative Fixed-Filter Active Noise Control (GFANC) method offers fast response speed, but its lack of adaptability may lead to large steady-state errors. This paper proposes a hybrid GFANC-FxNLMS algorithm to leverage the complementary advantages of both approaches. In the hybrid GFANC-FxNLMS algorithm, GFANC provides a frame-level control filter as an initialization for FxNLMS, while FxNLMS performs continuous adaptation at the sampling rate. Small variations in the GFANC-generated filter may repeatedly reinitialize FxNLMS, interrupting its adaptation process and destabilizing the system. An online clustering module is introduced to avoid unnecessary re-initializations and improve system stability. Simulation results show that the proposed algorithm achieves fast response, very low steady-state error, and high stability, requiring only one pre-trained broadband filter.

Haowen Li, Zhengding Luo, Dongyuan Shi et al.

Direction-of-Arrival (DOA) estimation is critical in spatial audio and acoustic signal processing, with wide-ranging applications in real-world. Most existing DOA models are trained on synthetic data by convolving clean speech with room impulse responses (RIRs), which limits their generalizability due to constrained acoustic diversity. In this paper, we revisit DOA estimation using a recently introduced dataset constructed with the assistance of large language models (LLMs), which provides more realistic and diverse spatial audio scenes. We benchmark several representative neural-based DOA methods on this dataset and propose LightDOA, a lightweight DOA estimation model based on depthwise separable convolutions, specifically designed for mutil-channel input in varying environments. Experimental results show that LightDOA achieves satisfactory accuracy and robustness across various acoustic scenes while maintaining low computational complexity. This study not only highlights the potential of spatial audio synthesized with the assistance of LLMs in advancing robust and efficient DOA estimation research, but also highlights LightDOA as efficient solution for resource-constrained applications.

Shengyang Wu, Jingyu Wang, Dongyuan Shi

False Data Injection Attack (FDIA) has become a growing concern in modern cyber-physical power systems. Most existing FDIA detection techniques project the raw measurement data into a high-dimensional latent space to separate normal and attacked samples. These approaches focus more on the statistical correlations of data values and are therefore susceptible to data distribution drifts induced by changes in system operating points or changes in FDIA types and strengths, especially for FDIA localization tasks. Causal inference, on the other hand, extracts the causality behind the coordinated fluctuations of different measurements. The causality patterns are determined by fundamental physical laws such as Ohm's Law and Kirchhoff's Law. They are sensitive to the violation of physical laws caused by FDIA, but tend to remain stable with the drift of system operating points. Leveraging this advantage, this paper proposes a joint FDIA detection and localization framework based on causal inference and the Graph Attention Network (GAT) to identify the attacked system nodes. The proposed framework consists of two levels. The lower level uses the X-learner algorithm to estimate the causality strength between measurements and generate Measurement Causality Graphs (MCGs). The upper level then applies a GAT to identify the anomaly patterns in the MCGs. Since the extracted causality patterns are intrinsically related to the measurements, it is easier for the upper level to figure out the attacked nodes than the existing FDIA localization approaches. The performance of the proposed framework is evaluated on the IEEE 39-bus system. Experimental results show that the causality-based FDIA detection and localization mechanism is highly interpretable and robust.

Jisheng Bai, Mou Wang, Haohe Liu et al.

Acoustic scene classification (ASC) is a crucial research problem in computational auditory scene analysis, and it aims to recognize the unique acoustic characteristics of an environment. One of the challenges of the ASC task is the domain shift between training and testing data. Since 2018, ASC challenges have focused on the generalization of ASC models across different recording devices. Although this task, in recent years, has achieved substantial progress in device generalization, the challenge of domain shift between different geographical regions, involving discrepancies such as time, space, culture, and language, remains insufficiently explored at present. In addition, considering the abundance of unlabeled acoustic scene data in the real world, it is important to study the possible ways to utilize these unlabelled data. Therefore, we introduce the task Semi-supervised Acoustic Scene Classification under Domain Shift in the ICME 2024 Grand Challenge. We encourage participants to innovate with semi-supervised learning techniques, aiming to develop more robust ASC models under domain shift.

Jianhua Pei, Jingyu Wang, Dongyuan Shi et al.

Power system cyber-physical uncertainties, including measurement ambiguities stemming from cyber attacks and data losses, along with system uncertainties introduced by massive renewables and complex dynamics, reduce the likelihood of enhancing the quality of measurements. Fortunately, denoising diffusion models exhibit powerful learning and generation abilities for the complex underlying physics of the real world. To this end, this paper proposes an improved detection and imputation based two-stage denoising diffusion model (TSDM) to identify and reconstruct the measurements with various cyber-physical uncertainties. The first stage of the model comprises a classifier-guided conditional anomaly detection component, while the second stage involves diffusion-based measurement imputation component. Moreover, the proposed TSDM adopts optimal variance to accelerate the diffusion generation process with subsequence sampling. Extensive numerical case studies demonstrate that the proposed TSDM can accurately recover power system measurements despite renewables-induced strong randomness and highly nonlinear dynamics. Additionally, the proposed TSDM has stronger robustness compared to existing reconstruction networks and exhibits lower computational complexity than general denoising diffusion models.

Zhengding Luo, Dongyuan Shi, Xiaoyi Shen et al.

Delayless noise control is achieved by our earlier generative fixed-filter active noise control (GFANC) framework through efficient coordination between the co-processor and real-time controller. However, the one-dimensional convolutional neural network (1D CNN) in the co-processor requires initial training using labelled noise datasets. Labelling noise data can be resource-intensive and may introduce some biases. In this paper, we propose an unsupervised-GFANC approach to simplify the 1D CNN training process and enhance its practicality. During training, the co-processor and real-time controller are integrated into an end-to-end differentiable ANC system. This enables us to use the accumulated squared error signal as the loss for training the 1D CNN. With this unsupervised learning paradigm, the unsupervised-GFANC method not only omits the labelling process but also exhibits better noise reduction performance compared to the supervised GFANC method in real noise experiments.

Lvyang Yang, Jiankang Zhang, Huaiqiang Li et al.

The digitization of engineering drawings is crucial for efficient reuse, distribution, and archiving. Existing computer vision approaches for digitizing engineering drawings typically assume the input drawings have high quality. However, in reality, engineering drawings are often blurred and distorted due to improper scanning, storage, and transmission, which may jeopardize the effectiveness of existing approaches. This paper focuses on restoring and recognizing low-quality engineering drawings, where an end-to-end framework is proposed to improve the quality of the drawings and identify the graphical symbols on them. The framework uses K-means clustering to classify different engineering drawing patches into simple and complex texture patches based on their gray level co-occurrence matrix statistics. Computer vision operations and a modified Enhanced Super-Resolution Generative Adversarial Network (ESRGAN) model are then used to improve the quality of the two types of patches, respectively. A modified Faster Region-based Convolutional Neural Network (Faster R-CNN) model is used to recognize the quality-enhanced graphical symbols. Additionally, a multi-stage task-driven collaborative learning strategy is proposed to train the modified ESRGAN and Faster R-CNN models to improve the resolution of engineering drawings in the direction that facilitates graphical symbol recognition, rather than human visual perception. A synthetic data generation method is also proposed to construct quality-degraded samples for training the framework. Experiments on real-world electrical diagrams show that the proposed framework achieves an accuracy of 98.98% and a recall of 99.33%, demonstrating its superiority over previous approaches. Moreover, the framework is integrated into a widely-used power system software application to showcase its practicality.

Yan Li, Zengli Yang, Youhuai Wang et al.

The Extreme Operating Conditions Search (EOCS) problem is one of the key problems in relay setting calculation, which is used to ensure that the setting values of protection relays can adapt to the changing operating conditions of power systems over a period of time after deployment. The high penetration of renewable energy and the wide application of inverter-based resources make the operating conditions of renewable power systems more volatile, which urges the adoption of the online relay setting calculation strategy. However, the computation speed of existing EOCS methods based on local enumeration, heuristic algorithms, and mathematical programming cannot meet the efficiency requirement of online relay setting calculation. To reduce the time overhead, this paper, for the first time, proposes an efficient deep learning-based EOCS method suitable for online relay setting calculation. First, the power system information is formulated as four layers, i.e., a component parameter layer, a topological connection layer, an electrical distance layer, and a graph distance layer, which are fed into a parallel graph neural network (PGNN) model for feature extraction. Then, the four feature layers corresponding to each node are spliced and stretched, and then fed into the decision network to predict the extreme operating condition of the system. Finally, the proposed PGNN method is validated on the modified IEEE 39-bus and 118-bus test systems, where some of the synchronous generators are replaced by renewable generation units. The nonlinear fault characteristics of renewables are fully considered when computing fault currents. The experiment results show that the proposed PGNN method achieves higher accuracy than the existing methods in solving the EOCS problem. Meanwhile, it also provides greater improvements in online computation time.

Yan Li, Jingyu Wang, Jiankang Zhang et al.

Searching for the Extreme Operating Conditions (EOCs) is one of the core problems of power system relay protection setting calculation. The current methods based on brute-force search, heuristic algorithms, and mathematical programming can hardly meet the requirements of today's power systems in terms of computation speed due to the drastic changes in operating conditions induced by renewables and power electronics. This paper proposes an EOC fast search method, named Graph Dueling Double Deep Q Network (Graph D3QN), which combines graph neural network and deep reinforcement learning to address this challenge. First, the EOC search problem is modeled as a Markov decision process, where the information of the underlying power system is extracted using graph neural networks, so that the EOC of the system can be found via deep reinforcement learning. Then, a two-stage Guided Learning and Free Exploration (GLFE) training framework is constructed to accelerate the convergence speed of reinforcement learning. Finally, the proposed Graph D3QN method is validated through case studies of searching maximum fault current for relay protection setting calculation on the IEEE 39-bus and 118-bus systems. The experimental results demonstrate that Graph D3QN can reduce the computation time by 10 to 1000 times while guaranteeing the accuracy of the selected EOCs.

Jianhua Pei, Cheng Feng, Ping Wang et al.

Deep learning (DL)-based Semantic Communications (SemCom) is becoming critical to maximize overall efficiency of communication networks. Nevertheless, SemCom is sensitive to wireless channel uncertainties, source outliers, and suffer from poor generalization bottlenecks. To address the mentioned challenges, this paper develops a latent diffusion model-enabled SemCom system with three key contributions, i.e., i) to handle potential outliers in the source data, semantic errors obtained by projected gradient descent based on the vulnerabilities of DL models, are utilized to update the parameters and obtain an outlier-robust encoder, ii) a lightweight single-layer latent space transformation adapter completes one-shot learning at the transmitter and is placed before the decoder at the receiver, enabling adaptation for out-of-distribution data and enhancing human-perceptual quality, and iii) an end-to-end consistency distillation (EECD) strategy is used to distill the diffusion models trained in latent space, enabling deterministic single or few-step low-latency denoising in various noisy channels while maintaining high semantic quality. Extensive numerical experiments across different datasets demonstrate the superiority of the proposed SemCom system, consistently proving its robustness to outliers, the capability to transmit data with unknown distributions, and the ability to perform real-time channel denoising tasks while preserving high human perceptual quality, outperforming the existing denoising approaches in semantic metrics such as multi-scale structural similarity index measure (MS-SSIM) and learned perceptual image path similarity (LPIPS).