Andrea Carena

Metodi Plamenov Yankov, Francesco Da Ros, Uiara Celine de Moura et al.

The problem of Raman amplifier optimization is studied. A differentiable interpolation function is obtained for the Raman gain coefficient using machine learning (ML), which allows for the gradient descent optimization of forward-propagating Raman pumps. Both the frequency and power of an arbitrary number of pumps in a forward pumping configuration are then optimized for an arbitrary data channel load and span length. The forward propagation model is combined with an experimentally-trained ML model of a backward-pumping Raman amplifier to jointly optimize the frequency and power of the forward amplifier's pumps and the powers of the backward amplifier's pumps. The joint forward and backward amplifier optimization is demonstrated for an unrepeatered transmission of 250 km. A gain flatness of $<$ 1~dB over 4 THz is achieved. The optimized amplifiers are validated using a numerical simulator.

Mehran Soltani, Francesco Da Ros, Andrea Carena et al.

We experimentally validate a real-time machine learning framework, capable of controlling the pump power values of Raman amplifiers to shape the signal power evolution in two-dimensions (2D): frequency and fiber distance. In our setup, power values of four first-order counter-propagating pumps are optimized to achieve the desired 2D power profile. The pump power optimization framework includes a convolutional neural network (CNN) followed by differential evolution (DE) technique, applied online to the amplifier setup to automatically achieve the target 2D power profiles. The results on achievable 2D profiles show that the framework is able to guarantee very low maximum absolute error (MAE) (<0.5 dB) between the obtained and the target 2D profiles. Moreover, the framework is tested in a multi-objective design scenario where the goal is to achieve the 2D profiles with flat gain levels at the end of the span, jointly with minimum spectral excursion over the entire fiber length. In this case, the experimental results assert that for 2D profiles with the target flat gain levels, the DE obtains less than 1 dB maximum gain deviation, when the setup is not physically limited in the pump power values. The simulation results also prove that with enough pump power available, better gain deviation (less than 0.6 dB) for higher target gain levels is achievable.

Mehran Soltani, Francesco Da Ros, Andrea Carena et al.

We experimentally validate a machine learning-enabled Raman amplification framework, capable of jointly shaping the signal power evolution in two domains: frequency and fiber distance. The proposed experiment addresses the amplification in the whole C-band, by optimizing four first-order counter-propagating Raman pumps.

Metodi P. Yankov, Mehran Soltani, Andrea Carena et al.

Designing and optimizing optical amplifiers to maximize system performance is becoming increasingly important as optical communication systems strive to increase throughput. Offline optimization of optical amplifiers relies on models ranging from white-box models deeply rooted in physics to black-box data-driven and physics-agnostic models. Here, we compare the capabilities of white-, grey- and black-box models on the challenging test case of optimizing a bidirectional distributed Raman amplifier to achieve a target frequency-distance signal power profile. We show that any of the studied methods can achieve similar frequency and distance flatness of between 1 and 3.6 dB (depending on the definition of flatness) over the C-band in an 80-km span. Then, we discuss the models' applicability, advantages, and drawbacks based on the target application scenario, in particular in terms of flexibility, optimization speed, and access to training data.