Xingwei Wang

Enneng Yang, Li Shen, Guibing Guo et al.

Model merging is an efficient empowerment technique in the machine learning community that does not require the collection of raw training data and does not require expensive computation. As model merging becomes increasingly prevalent across various fields, it is crucial to understand the available model merging techniques comprehensively. However, there is a significant gap in the literature regarding a systematic and thorough review of these techniques. This survey provides a comprehensive overview of model merging methods and theories, their applications in various domains and settings, and future research directions. Specifically, we first propose a new taxonomic approach that exhaustively discusses existing model merging methods. Secondly, we discuss the application of model merging techniques in large language models, multimodal large language models, and more than ten machine learning subfields, including continual learning, multi-task learning, few-shot learning, etc. Finally, we highlight the remaining challenges of model merging and discuss future research directions. A comprehensive list of papers about model merging is available at https://github.com/EnnengYang/Awesome-Model-Merging-Methods-Theories-Applications.

Yizhou Dang, Enneng Yang, Guibing Guo et al.

Sequential recommendation is an important task to predict the next-item to access based on a sequence of interacted items. Most existing works learn user preference as the transition pattern from the previous item to the next one, ignoring the time interval between these two items. However, we observe that the time interval in a sequence may vary significantly different, and thus result in the ineffectiveness of user modeling due to the issue of \emph{preference drift}. In fact, we conducted an empirical study to validate this observation, and found that a sequence with uniformly distributed time interval (denoted as uniform sequence) is more beneficial for performance improvement than that with greatly varying time interval. Therefore, we propose to augment sequence data from the perspective of time interval, which is not studied in the literature. Specifically, we design five operators (Ti-Crop, Ti-Reorder, Ti-Mask, Ti-Substitute, Ti-Insert) to transform the original non-uniform sequence to uniform sequence with the consideration of variance of time intervals. Then, we devise a control strategy to execute data augmentation on item sequences in different lengths. Finally, we implement these improvements on a state-of-the-art model CoSeRec and validate our approach on four real datasets. The experimental results show that our approach reaches significantly better performance than the other 11 competing methods. Our implementation is available: https://github.com/KingGugu/TiCoSeRec.

Ying Li, Xingwei Wang, Rongfei Zeng et al.

Machine learning typically relies on the assumption that training and testing distributions are identical and that data is centrally stored for training and testing. However, in real-world scenarios, distributions may differ significantly and data is often distributed across different devices, organizations, or edge nodes. Consequently, it is imperative to develop models that can effectively generalize to unseen distributions where data is distributed across different domains. In response to this challenge, there has been a surge of interest in federated domain generalization (FDG) in recent years. FDG combines the strengths of federated learning (FL) and domain generalization (DG) techniques to enable multiple source domains to collaboratively learn a model capable of directly generalizing to unseen domains while preserving data privacy. However, generalizing the federated model under domain shifts is a technically challenging problem that has received scant attention in the research area so far. This paper presents the first survey of recent advances in this area. Initially, we discuss the development process from traditional machine learning to domain adaptation and domain generalization, leading to FDG as well as provide the corresponding formal definition. Then, we categorize recent methodologies into four classes: federated domain alignment, data manipulation, learning strategies, and aggregation optimization, and present suitable algorithms in detail for each category. Next, we introduce commonly used datasets, applications, evaluations, and benchmarks. Finally, we conclude this survey by providing some potential research topics for the future.

Enneng Yang, Zhenyi Wang, Li Shen et al.

Multi-task learning (MTL) aims to empower a model to tackle multiple tasks simultaneously. A recent development known as task arithmetic has revealed that several models, each fine-tuned for distinct tasks, can be directly merged into a single model to execute MTL without necessitating a retraining process using the initial training data. Nevertheless, this direct addition of models often leads to a significant deterioration in the overall performance of the merged model. This decline occurs due to potential conflicts and intricate correlations among the multiple tasks. Consequently, the challenge emerges of how to merge pre-trained models more effectively without using their original training data. This paper introduces an innovative technique called Adaptive Model Merging (AdaMerging). This approach aims to autonomously learn the coefficients for model merging, either in a task-wise or layer-wise manner, without relying on the original training data. Specifically, our AdaMerging method operates as an automatic, unsupervised task arithmetic scheme. It leverages entropy minimization on unlabeled test samples from the multi-task setup as a surrogate objective function to iteratively refine the merging coefficients of the multiple models. Our experimental findings across eight tasks demonstrate the efficacy of the AdaMerging scheme we put forth. Compared to the current state-of-the-art task arithmetic merging scheme, AdaMerging showcases a remarkable 11\% improvement in performance. Notably, AdaMerging also exhibits superior generalization capabilities when applied to unseen downstream tasks. Furthermore, it displays a significantly enhanced robustness to data distribution shifts that may occur during the testing phase.

Yuting Liu, Enneng Yang, Yizhou Dang et al.

Multimodal recommendation aims to model user and item representations comprehensively with the involvement of multimedia content for effective recommendations. Existing research has shown that it is beneficial for recommendation performance to combine (user- and item-) ID embeddings with multimodal salient features, indicating the value of IDs. However, there is a lack of a thorough analysis of the ID embeddings in terms of feature semantics in the literature. In this paper, we revisit the value of ID embeddings for multimodal recommendation and conduct a thorough study regarding its semantics, which we recognize as subtle features of \emph{content} and \emph{structure}. Based on our findings, we propose a novel recommendation model by incorporating ID embeddings to enhance the salient features of both content and structure. Specifically, we put forward a hierarchical attention mechanism to incorporate ID embeddings in modality fusing, coupled with contrastive learning, to enhance content representations. Meanwhile, we propose a lightweight graph convolution network for each modality to amalgamate neighborhood and ID embeddings for improving structural representations. Finally, the content and structure representations are combined to form the ultimate item embedding for recommendation. Extensive experiments on three real-world datasets (Baby, Sports, and Clothing) demonstrate the superiority of our method over state-of-the-art multimodal recommendation methods and the effectiveness of fine-grained ID embeddings. Our code is available at https://anonymous.4open.science/r/IDSF-code/.

Enneng Yang, Zhenyi Wang, Li Shen et al.

Continual learning (CL) aims to learn new tasks without forgetting previous tasks. However, existing CL methods require a large amount of raw data, which is often unavailable due to copyright considerations and privacy risks. Instead, stakeholders usually release pre-trained machine learning models as a service (MLaaS), which users can access via APIs. This paper considers two practical-yet-novel CL settings: data-efficient CL (DECL-APIs) and data-free CL (DFCL-APIs), which achieve CL from a stream of APIs with partial or no raw data. Performing CL under these two new settings faces several challenges: unavailable full raw data, unknown model parameters, heterogeneous models of arbitrary architecture and scale, and catastrophic forgetting of previous APIs. To overcome these issues, we propose a novel data-free cooperative continual distillation learning framework that distills knowledge from a stream of APIs into a CL model by generating pseudo data, just by querying APIs. Specifically, our framework includes two cooperative generators and one CL model, forming their training as an adversarial game. We first use the CL model and the current API as fixed discriminators to train generators via a derivative-free method. Generators adversarially generate hard and diverse synthetic data to maximize the response gap between the CL model and the API. Next, we train the CL model by minimizing the gap between the responses of the CL model and the black-box API on synthetic data, to transfer the API's knowledge to the CL model. Furthermore, we propose a new regularization term based on network similarity to prevent catastrophic forgetting of previous APIs.Our method performs comparably to classic CL with full raw data on the MNIST and SVHN in the DFCL-APIs setting. In the DECL-APIs setting, our method achieves 0.97x, 0.75x and 0.69x performance of classic CL on CIFAR10, CIFAR100, and MiniImageNet.

Yizhou Dang, Yifan Wu, Minhan Huang et al.

Sub-sequence splitting (SSS) has been demonstrated as an effective approach to mitigate data sparsity in sequential recommendation (SR) by splitting a raw user interaction sequence into multiple sub-sequences. Previous studies have demonstrated its ability to enhance the performance of SR models significantly. However, in this work, we discover that \textbf{(i). SSS may interfere with the evaluation of the model's actual performance.} We observed that many recent state-of-the-art SR models employ SSS during the data reading stage (not mentioned in the papers). When we removed this operation, performance significantly declined, even falling below that of earlier classical SR models. The varying improvements achieved by SSS and different splitting methods across different models prompt us to analyze further when SSS proves effective. We find that \textbf{(ii). SSS demonstrates strong capabilities only when specific splitting methods, target strategies, and loss functions are used together.} Inappropriate combinations may even harm performance. Furthermore, we analyze why sub-sequence splitting yields such remarkable performance gains and find that \textbf{(iii). it evens out the distribution of training data while increasing the likelihood that different items are targeted.} Finally, we provide suggestions for overcoming SSS interference, along with a discussion on data augmentation methods and future directions. We hope this work will prompt the broader community to re-examine the impact of data splitting on SR and promote fairer, more rigorous model evaluation. All analysis code and data will be made available upon acceptance. We provide a simple, anonymous implementation at https://github.com/KingGugu/SSS4SR.

Chu Zhao, Enneng Yang, Yuliang Liang et al.

Graph Neural Networks (GNNs)-based recommendation algorithms typically assume that training and testing data are drawn from independent and identically distributed (IID) spaces. However, this assumption often fails in the presence of out-of-distribution (OOD) data, resulting in significant performance degradation. In this study, we construct a Structural Causal Model (SCM) to analyze interaction data, revealing that environmental confounders (e.g., the COVID-19 pandemic) lead to unstable correlations in GNN-based models, thus impairing their generalization to OOD data. To address this issue, we propose a novel approach, graph representation learning via causal diffusion (CausalDiffRec) for OOD recommendation. This method enhances the model's generalization on OOD data by eliminating environmental confounding factors and learning invariant graph representations. Specifically, we use backdoor adjustment and variational inference to infer the real environmental distribution, thereby eliminating the impact of environmental confounders. This inferred distribution is then used as prior knowledge to guide the representation learning in the reverse phase of the diffusion process to learn the invariant representation. In addition, we provide a theoretical derivation that proves optimizing the objective function of CausalDiffRec can encourage the model to learn environment-invariant graph representations, thereby achieving excellent generalization performance in recommendations under distribution shifts. Our extensive experiments validate the effectiveness of CausalDiffRec in improving the generalization of OOD data, and the average improvement is up to 10.69% on Food, 18.83% on KuaiRec, 22.41% on Yelp2018, and 11.65% on Douban datasets.

Yuting Liu, Jinghao Zhang, Yizhou Dang et al.

Involving collaborative information in Large Language Models (LLMs) is a promising technique for adapting LLMs for recommendation. Existing methods achieve this by concatenating collaborative features with text tokens into a unified sequence input and then fine-tuning to align these features with LLM's input space. Although effective, in this work, we identify two limitations when adapting LLMs to recommendation tasks, which hinder the integration of general knowledge and collaborative information, resulting in sub-optimal recommendation performance. (1) Fine-tuning LLM with recommendation data can undermine its inherent world knowledge and fundamental competencies, which are crucial for interpreting and inferring recommendation text. (2) Incorporating collaborative features into textual prompts disrupts the semantics of the original prompts, preventing LLM from generating appropriate outputs. In this paper, we propose a new paradigm, \textbf{Co}llaborative \textbf{Lo}RA (CoRA), with a collaborative query generator. Rather than input space alignment, this method aligns collaborative information with LLM's parameter space, representing them as incremental weights to update LLM's output. This way, LLM perceives collaborative information without altering its general knowledge and text inference capabilities. Specifically, we employ a collaborative filtering model to extract user and item embeddings and inject them into a set number of learnable queries. We then convert collaborative queries into collaborative weights with low-rank properties and merge the collaborative weights into LLM's weights, enabling LLM to perceive the collaborative signals and generate personalized recommendations without fine-tuning or extra collaborative tokens in prompts. Extensive experiments confirm that CoRA effectively integrates collaborative information into LLM, enhancing recommendation performance.

Rongfei Zeng, Mai Su, Ruiyun Yu et al.

Monocular 3D reconstruction is to reconstruct the shape of object and its other information from a single RGB image. In 3D reconstruction, polygon mesh, with detailed surface information and low computational cost, is the most prevalent expression form obtained from deep learning models. However, the state-of-the-art schemes fail to directly generate well-structured meshes, and we identify that most meshes have severe Vertices Clustering (VC) and Illegal Twist (IT) problems. By analyzing the mesh deformation process, we pinpoint that the inappropriate usage of Chamfer Distance (CD) loss is a root cause of VC and IT problems in deep learning model. In this paper, we initially demonstrate these two problems induced by CD loss with visual examples and quantitative analyses. Then, we propose a fine-grained reconstruction method CD$^2$ by employing Chamfer distance twice to perform a plausible and adaptive deformation. Extensive experiments on two 3D datasets and comparisons with five latest schemes demonstrate that our CD$^2$ directly generates a well-structured mesh and outperforms others in terms of several quantitative metrics.

Chu Zhao, Enneng Yang, Yuliang Liang et al.

Graph Contrastive Learning (GCL) leverages data augmentation techniques to produce contrasting views, enhancing the accuracy of recommendation systems through learning the consistency between contrastive views. However, existing augmentation methods, such as directly perturbing interaction graph (e.g., node/edge dropout), may interfere with the original connections and generate poor contrasting views, resulting in sub-optimal performance. In this paper, we define the views that share only a small amount of information with the original graph due to poor data augmentation as noisy views (i.e., the last 20% of the views with a cosine similarity value less than 0.1 to the original view). We demonstrate through detailed experiments that noisy views will significantly degrade recommendation performance. Further, we propose a model-agnostic Symmetric Graph Contrastive Learning (SGCL) method with theoretical guarantees to address this issue. Specifically, we introduce symmetry theory into graph contrastive learning, based on which we propose a symmetric form and contrast loss resistant to noisy interference. We provide theoretical proof that our proposed SGCL method has a high tolerance to noisy views. Further demonstration is given by conducting extensive experiments on three real-world datasets. The experimental results demonstrate that our approach substantially increases recommendation accuracy, with relative improvements reaching as high as 12.25% over nine other competing models. These results highlight the efficacy of our method.

Run Ling, Ke Cao, Jian Lu et al.

Multi-subject video generation aims to synthesize videos from textual prompts and multiple reference images, ensuring that each subject preserves natural scale and visual fidelity. However, current methods face two challenges: scale inconsistency, where variations in subject size lead to unnatural generation, and permutation sensitivity, where the order of reference inputs causes subject distortion. In this paper, we propose MoFu, a unified framework that tackles both challenges. For scale inconsistency, we introduce Scale-Aware Modulation (SMO), an LLM-guided module that extracts implicit scale cues from the prompt and modulates features to ensure consistent subject sizes. To address permutation sensitivity, we present a simple yet effective Fourier Fusion strategy that processes the frequency information of reference features via the Fast Fourier Transform to produce a unified representation. Besides, we design a Scale-Permutation Stability Loss to jointly encourage scale-consistent and permutation-invariant generation. To further evaluate these challenges, we establish a dedicated benchmark with controlled variations in subject scale and reference permutation. Extensive experiments demonstrate that MoFu significantly outperforms existing methods in preserving natural scale, subject fidelity, and overall visual quality.

Zirui Zheng, Yingyang Chen, Xinyue Pei et al.

To address the high mobility impacts and the ultra-reliable and low-latency communication (URLLC) requirements in autonomous driving scenarios, rate-splitting multiple access (RSMA) combined with short-packet communication (SPC) emerges as a promising solution.Autonomous vehicles rely on real-time information exchange to ensure safety and coordination, making information freshness essential.By jointly capturing transmission delays and packet errors, age of information (AoI) serves as a comprehensive metric for freshness.In this paper, we investigate short-packet rate splitting to enhance information freshness measured by the AoI.By splitting the unicast messages into common and private parts, encoding all common parts together with the multicast message into a common stream, and encoding each private part into a private stream, RSMA effectively manages interference and enables achieving lower AoI.By considering critical factors such as transmit power, vehicle velocity, blocklength, and the number of transmit antennas, we derive closed-form expressions for the average AoI (AAoI) of the common stream under partial decoding and the overall AAoI under complete decoding.To enhance the AAoI performance, we propose the multi-start two-step successive convex approximation (SCA) algorithm.This algorithm first optimizes the power allocation and subsequently optimizes the rate splitting under the quality of service (QoS) trade-off constraint.Simulation results demonstrate that our short-packet rate-splitting scheme significantly improves the AAoI performance while ensuring system fairness and enabling ultra-low AAoI through the common stream, meeting the requirements of autonomous driving applications.Moreover, the trade-off between the common and overall performance is revealed, indicating that the overall performance can be further enhanced while maintaining the advantages of the common stream.

Enneng Yang, Li Shen, Zhenyi Wang et al.

Model merging-based multitask learning (MTL) offers a promising approach for performing MTL by merging multiple expert models without requiring access to raw training data. However, in this paper, we examine the merged model's representation distribution and uncover a critical issue of "representation bias". This bias arises from a significant distribution gap between the representations of the merged and expert models, leading to the suboptimal performance of the merged MTL model. To address this challenge, we first propose a representation surgery solution called Surgery. Surgery is a lightweight, task-specific module that aligns the final layer representations of the merged model with those of the expert models, effectively alleviating bias and improving the merged model's performance. Despite these improvements, a performance gap remains compared to the traditional MTL method. Further analysis reveals that representation bias phenomena exist at each layer of the merged model, and aligning representations only in the last layer is insufficient for fully reducing systemic bias because biases introduced at each layer can accumulate and interact in complex ways. To tackle this, we then propose a more comprehensive solution, deep representation surgery (also called SurgeryV2), which mitigates representation bias across all layers, and thus bridges the performance gap between model merging-based MTL and traditional MTL. Finally, we design an unsupervised optimization objective to optimize both the Surgery and SurgeryV2 modules. Our experimental results show that incorporating these modules into state-of-the-art (SOTA) model merging schemes leads to significant performance gains. Notably, our SurgeryV2 scheme reaches almost the same level as individual expert models or the traditional MTL model. The code is available at \url{https://github.com/EnnengYang/SurgeryV2}.

Yuting Liu, Yizhou Dang, Yuliang Liang et al.

Recently, sign-aware graph recommendation has drawn much attention as it will learn users' negative preferences besides positive ones from both positive and negative interactions (i.e., links in a graph) with items. To accommodate the different semantics of negative and positive links, existing works utilize two independent encoders to model users' positive and negative preferences, respectively. However, these approaches cannot learn the negative preferences from high-order heterogeneous interactions between users and items formed by multiple links with different signs, resulting in inaccurate and incomplete negative user preferences. To cope with these intractable issues, we propose a novel \textbf{L}ight \textbf{S}igned \textbf{G}raph Convolution Network specifically for \textbf{Rec}ommendation (\textbf{LSGRec}), which adopts a unified modeling approach to simultaneously model high-order users' positive and negative preferences on a signed user-item interaction graph. Specifically, for the negative preferences within high-order heterogeneous interactions, first-order negative preferences are captured by the negative links, while high-order negative preferences are propagated along positive edges. Then, recommendation results are generated based on positive preferences and optimized with negative ones. Finally, we train representations of users and items through different auxiliary tasks. Extensive experiments on three real-world datasets demonstrate that our method outperforms existing baselines regarding performance and computational efficiency. Our code is available at \url{https://anonymous.4open.science/r/LSGRec-BB95}.

Enneng Yang, Li Shen, Zhenyi Wang et al.

Multi-task learning (MTL) compresses the information from multiple tasks into a unified backbone to improve computational efficiency and generalization. Recent work directly merges multiple independently trained models to perform MTL instead of collecting their raw data for joint training, greatly expanding the application scenarios of MTL. However, by visualizing the representation distribution of existing model merging schemes, we find that the merged model often suffers from the dilemma of representation bias. That is, there is a significant discrepancy in the representation distribution between the merged and individual models, resulting in poor performance of merged MTL. In this paper, we propose a representation surgery solution called "Surgery" to reduce representation bias in the merged model. Specifically, Surgery is a lightweight task-specific module that takes the representation of the merged model as input and attempts to output the biases contained in the representation from the merged model. We then designed an unsupervised optimization objective that updates the Surgery module by minimizing the distance between the merged model's representation and the individual model's representation. Extensive experiments demonstrate significant MTL performance improvements when our Surgery module is applied to state-of-the-art (SOTA) model merging schemes.

Chu Zhao, Enneng Yang, Yuliang Liang et al.

The distributionally robust optimization (DRO)-based graph neural network methods improve recommendation systems' out-of-distribution (OOD) generalization by optimizing the model's worst-case performance. However, these studies fail to consider the impact of noisy samples in the training data, which results in diminished generalization capabilities and lower accuracy. Through experimental and theoretical analysis, this paper reveals that current DRO-based graph recommendation methods assign greater weight to noise distribution, leading to model parameter learning being dominated by it. When the model overly focuses on fitting noise samples in the training data, it may learn irrelevant or meaningless features that cannot be generalized to OOD data. To address this challenge, we design a Distributionally Robust Graph model for OOD recommendation (DRGO). Specifically, our method first employs a simple and effective diffusion paradigm to alleviate the noisy effect in the latent space. Additionally, an entropy regularization term is introduced in the DRO objective function to avoid extreme sample weights in the worst-case distribution. Finally, we provide a theoretical proof of the generalization error bound of DRGO as well as a theoretical analysis of how our approach mitigates noisy sample effects, which helps to better understand the proposed framework from a theoretical perspective. We conduct extensive experiments on four datasets to evaluate the effectiveness of our framework against three typical distribution shifts, and the results demonstrate its superiority in both independently and identically distributed distributions (IID) and OOD.

Pengxiang Lan, Enneng Yang, Yuting Liu et al.

Prompt tuning is a promising method to fine-tune a pre-trained language model without retraining its large-scale parameters. Instead, it attaches a soft prompt to the input text, whereby downstream tasks can be well adapted by merely learning the embeddings of prompt tokens. Nevertheless, existing methods still suffer from two challenges: (i) they are hard to balance accuracy and efficiency. A longer (shorter) soft prompt generally leads to a better(worse) accuracy but at the cost of more (less) training time. (ii)The performance may not be consistent when adapting to different downstream tasks. We attribute it to the same embedding space but responsible for different requirements of downstream tasks. To address these issues, we propose an Efficient Prompt Tuning method (EPT) by multi-space projection and prompt fusion. Specifically, it decomposes a given soft prompt into a shorter prompt and two low-rank matrices, significantly reducing the training time. Accuracy is also enhanced by leveraging low-rank matrices and the short prompt as additional knowledge sources to enrich the semantics of the original short prompt. In addition, we project the soft prompt into multiple subspaces to improve the performance consistency, and then adaptively learn the combination weights of different spaces through a gating network. Experiments on 13 natural language processing downstream tasks show that our method significantly and consistently outperforms 11 comparison methods with the relative percentage of improvements up to 12.9%, and training time decreased by 14%.

Run Ling, Wenji Wang, Yuting Liu et al.

Personalized image generation is crucial for improving the user experience, as it renders reference images into preferred ones according to user visual preferences. Although effective, existing methods face two main issues. First, existing methods treat all items in the user historical sequence equally when extracting user preferences, overlooking the varying semantic similarities between historical items and the reference item. Disproportionately high weights for low-similarity items distort users' visual preferences for the reference item. Second, existing methods heavily rely on consistency between generated and reference images to optimize the generation, which leads to underfitting user preferences and hinders personalization. To address these issues, we propose Retrieval Augment Personalized Image GenerAtion guided by Recommendation (RAGAR). Our approach uses a retrieval mechanism to assign different weights to historical items according to their similarities to the reference item, thereby extracting more refined users' visual preferences for the reference item. Then we introduce a novel rank task based on the multi-modal ranking model to optimize the personalization of the generated images instead of forcing depend on consistency. Extensive experiments and human evaluations on three real-world datasets demonstrate that RAGAR achieves significant improvements in both personalization and semantic metrics compared to five baselines.

Pengxiang Lan, Haoyu Xu, Enneng Yang et al.

Prompt tuning (PT) offers a cost-effective alternative to fine-tuning large-scale pre-trained language models (PLMs), requiring only a few parameters in soft prompt tokens added before the input text. However, existing PT approaches face two significant issues: (i) They overlook intrinsic semantic associations between soft prompt tokens, leading to high discreteness and limited interactions, thus reducing the model's comprehension and effectiveness in complex tasks. (ii) Due to the complexity of downstream tasks, long soft prompt is necessitated to improve performance, but prompt length correlates positively with memory usage and computational costs. Achieving high efficiency and performance remains an ongoing challenge. To address these issues, we propose a novel Low-parameters prompt tuning (LAMP) method, which leverages prompt decomposition and compressed outer product. Specifically, the prompt decomposition module employs Truncated SVD to reduce training parameters and significantly lower the dimensionality of the soft prompt parameter space. It then utilizes a compressed outer product module to facilitate multiple interactions among prompt tokens, exploring their intrinsic associations to enhance knowledge representation. Finally, LAMP uses average pooling to reduce memory usage and training/inference time. Extensive experiments across six architectures and eight datasets demonstrate that LAMP outperforms state-of-the-art PT-based and LoRA-based methods in performance and efficiency.

Chu Zhao, Eneng Yang, Yizhou Dang et al.

Heuristic negative sampling enhances recommendation performance by selecting negative samples of varying hardness levels from predefined candidate pools to guide the model toward learning more accurate decision boundaries. However, our empirical and theoretical analyses reveal that unobserved environmental confounders (e.g., exposure or popularity biases) in candidate pools may cause heuristic sampling methods to introduce false hard negatives (FHNS). These misleading samples can encourage the model to learn spurious correlations induced by such confounders, ultimately compromising its generalization ability under distribution shifts. To address this issue, we propose a novel method named Causal Negative Sampling via Diffusion (CNSDiff). By synthesizing negative samples in the latent space via a conditional diffusion process, CNSDiff avoids the bias introduced by predefined candidate pools and thus reduces the likelihood of generating FHNS. Moreover, it incorporates a causal regularization term to explicitly mitigate the influence of environmental confounders during the negative sampling process, leading to robust negatives that promote out-of-distribution (OOD) generalization. Comprehensive experiments under four representative distribution shift scenarios demonstrate that CNSDiff achieves an average improvement of 13.96% across all evaluation metrics compared to state-of-the-art baselines, verifying its effectiveness and robustness in OOD recommendation tasks.

Xu Zheng, Chong Fu, Haoyu Xie et al.

Semi-supervised learning has made significant strides in the medical domain since it alleviates the heavy burden of collecting abundant pixel-wise annotated data for semantic segmentation tasks. Existing semi-supervised approaches enhance the ability to extract features from unlabeled data with prior knowledge obtained from limited labeled data. However, due to the scarcity of labeled data, the features extracted by the models are limited in supervised learning, and the quality of predictions for unlabeled data also cannot be guaranteed. Both will impede consistency training. To this end, we proposed a novel uncertainty-aware scheme to make models learn regions purposefully. Specifically, we employ Monte Carlo Sampling as an estimation method to attain an uncertainty map, which can serve as a weight for losses to force the models to focus on the valuable region according to the characteristics of supervised learning and unsupervised learning. Simultaneously, in the backward process, we joint unsupervised and supervised losses to accelerate the convergence of the network via enhancing the gradient flow between different tasks. Quantitatively, we conduct extensive experiments on three challenging medical datasets. Experimental results show desirable improvements to state-of-the-art counterparts.

Lianbo Ma, Nan Li, Guo Yu et al.

In the deployment of deep neural models, how to effectively and automatically find feasible deep models under diverse design objectives is fundamental. Most existing neural architecture search (NAS) methods utilize surrogates to predict the detailed performance (e.g., accuracy and model size) of a candidate architecture during the search, which however is complicated and inefficient. In contrast, we aim to learn an efficient Pareto classifier to simplify the search process of NAS by transforming the complex multi-objective NAS task into a simple Pareto-dominance classification task. To this end, we propose a classification-wise Pareto evolution approach for one-shot NAS, where an online classifier is trained to predict the dominance relationship between the candidate and constructed reference architectures, instead of using surrogates to fit the objective functions. The main contribution of this study is to change supernet adaption into a Pareto classifier. Besides, we design two adaptive schemes to select the reference set of architectures for constructing classification boundary and regulate the rate of positive samples over negative ones, respectively. We compare the proposed evolution approach with state-of-the-art approaches on widely-used benchmark datasets, and experimental results indicate that the proposed approach outperforms other approaches and have found a number of neural architectures with different model sizes ranging from 2M to 6M under diverse objectives and constraints.

Rongfei Zeng, Chao Zeng, Xingwei Wang et al.

Federated learning utilizes various resources provided by participants to collaboratively train a global model, which potentially address the data privacy issue of machine learning. In such promising paradigm, the performance will be deteriorated without sufficient training data and other resources in the learning process. Thus, it is quite crucial to inspire more participants to contribute their valuable resources with some payments for federated learning. In this paper, we present a comprehensive survey of incentive schemes for federate learning. Specifically, we identify the incentive problem in federated learning and then provide a taxonomy for various schemes. Subsequently, we summarize the existing incentive mechanisms in terms of the main techniques, such as Stackelberg game, auction, contract theory, Shapley value, reinforcement learning, blockchain. By reviewing and comparing some impressive results, we figure out three directions for the future study.

Guibing Guo, Songlin Zhai, Fajie Yuan et al.

Jointing visual-semantic embeddings (VSE) have become a research hotpot for the task of image annotation, which suffers from the issue of semantic gap, i.e., the gap between images' visual features (low-level) and labels' semantic features (high-level). This issue will be even more challenging if visual features cannot be retrieved from images, that is, when images are only denoted by numerical IDs as given in some real datasets. The typical way of existing VSE methods is to perform a uniform sampling method for negative examples that violate the ranking order against positive examples, which requires a time-consuming search in the whole label space. In this paper, we propose a fast adaptive negative sampler that can work well in the settings of no figure pixels available. Our sampling strategy is to choose the negative examples that are most likely to meet the requirements of violation according to the latent factors of images. In this way, our approach can linearly scale up to large datasets. The experiments demonstrate that our approach converges 5.02x faster than the state-of-the-art approaches on OpenImages, 2.5x on IAPR-TCI2 and 2.06x on NUS-WIDE datasets, as well as better ranking accuracy across datasets.