Huei Peng

Xianan Huang, Ding Zhao, Huei Peng

Dedicated Short Range Communication (DSRC) was designed to provide reliable wireless communication for intelligent transportation system applications. Sharing information among cars and between cars and the infrastructure, pedestrians, or "the cloud" has great potential to improve safety, mobility and fuel economy. DSRC is being considered by the US Department of Transportation to be required for ground vehicles. In the past, their performance has been assessed thoroughly in the labs and limited field testing, but not on a large fleet. In this paper, we present the analysis of DSRC performance using data from the world's largest connected vehicle test program - Safety Pilot Model Deployment lead by the University of Michigan. We first investigate their maximum and effective range, and then study the effect of environmental factors, such as trees/foliage, weather, buildings, vehicle travel direction, and road elevation. The results can be used to guide future DSRC equipment placement and installation, and can be used to develop DSRC communication models for numerical simulations.

Zhiyuan Huang, Ding Zhao, Henry Lam et al.

Evaluation and testing are critical for the development of Automated Vehicles (AVs). Currently, companies test AVs on public roads, which is very time-consuming and inefficient. We proposed the Accelerated Evaluation concept which uses a modified statistics of the surrounding vehicles and the Importance Sampling theory to reduce the evaluation time by several orders of magnitude, while ensuring the final evaluation results are accurate. In this paper, we further extend this idea by using Piecewise Mixture Distribution models instead of Single Distribution models. We demonstrate this idea to evaluate vehicle safety in lane change scenarios. The behavior of the cut-in vehicles was modeled based on more than 400,000 naturalistic driving lane changes collected by the University of Michigan Safety Pilot Model Deployment Program. Simulation results confirm that the accuracy and efficiency of the Piecewise Mixture Distribution method are better than the single distribution.

Macheng Shen, Ding Zhao, Jing Sun et al.

A crucial function for automated vehicle technologies is accurate localization. Lane-level accuracy is not readily available from low-cost Global Navigation Satellite System (GNSS) receivers because of factors such as multipath error and atmospheric bias. Approaches such as Differential GNSS can improve localization accuracy, but usually require investment in expensive base stations. Connected vehicle technologies provide an alternative approach to improving the localization accuracy. It will be shown in this paper that localization accuracy can be enhanced using crude GNSS measurements from a group of connected vehicles, by matching their locations to a digital map. A Rao-Blackwellized particle filter (RBPF) is used to jointly estimate the common biases of the pseudo-ranges and the vehicle positions. Multipath biases, which introduce receiver-specific (non-common) error, are mitigated by a multi-hypothesis detection-rejection approach. The temporal correlation of the estimations is exploited through the prediction-update process. The proposed approach is compared to existing methods using both simulations and experimental results. It was found that the proposed algorithm can eliminate the common biases and reduce the localization error to below 1 meter under open sky conditions.

Xinpeng Wang, Ding Zhao, Huei Peng et al.

Analyzing and reconstructing driving scenarios is crucial for testing and evaluating automated vehicles. This research analyzed left turn / straight-driving conflicts at unprotected intersections by extracting actual vehicle motion data from a naturalistic driving database collected by the University of Michigan. Nearly 7,000 Left turn across path opposite direction (LTAP/OD) events involving heavy trucks and light vehicles were extracted and used to build a stochastic model of such LTAP/OD scenarios. Statistical analysis showed that vehicle type is a significant factor, whereas the change of season seems to have limited influence on the statistical nature of the conflict. The results can be used to build HAV testing environments to simulate the LTAP/OD crash cases in a stochastic manner, which is among the top NHTSA identified priority light-vehicle pre-crash scenarios.

Yuxiao Chen, Ayonga Hereid, Huei Peng et al.

Correct-by-construction techniques, such as control barrier functions (CBFs), can be used to guarantee closed-loop safety by acting as a supervisor of an existing or legacy controller. However, supervisory-control intervention typically compromises the performance of the closed-loop system. On the other hand, machine learning has been used to synthesize controllers that inherit good properties from a training dataset, though safety is typically not guaranteed due to the difficulty of analyzing the associated neural network. In this paper, supervised learning is combined with CBFs to synthesize controllers that enjoy good performance with provable safety. A training set is generated by trajectory optimization that incorporates the CBF constraint for an interesting range of initial conditions of the truck model. A control policy is obtained via supervised learning that maps a feature representing the initial conditions to a parameterized desired trajectory. The learning-based controller is used as the performance controller and a CBF-based supervisory controller guarantees safety. A case study of lane keeping for articulated trucks shows that the controller trained by supervised learning inherits the good performance of the training set and rarely requires intervention by the CBF supervisor

Minghan Zhu, Maani Ghaffari, William A. Clark et al.

This paper proposes a convolution structure for learning SE(3)-equivariant features from 3D point clouds. It can be viewed as an equivariant version of kernel point convolutions (KPConv), a widely used convolution form to process point cloud data. Compared with existing equivariant networks, our design is simple, lightweight, fast, and easy to be integrated with existing task-specific point cloud learning pipelines. We achieve these desirable properties by combining group convolutions and quotient representations. Specifically, we discretize SO(3) to finite groups for their simplicity while using SO(2) as the stabilizer subgroup to form spherical quotient feature fields to save computations. We also propose a permutation layer to recover SO(3) features from spherical features to preserve the capacity to distinguish rotations. Experiments show that our method achieves comparable or superior performance in various tasks, including object classification, pose estimation, and keypoint-matching, while consuming much less memory and running faster than existing work. The proposed method can foster the development of equivariant models for real-world applications based on point clouds.

Minghan Zhu, Lingting Ge, Panqu Wang et al.

We propose a novel approach for monocular 3D object detection by leveraging local perspective effects of each object. While the global perspective effect shown as size and position variations has been exploited for monocular 3D detection extensively, the local perspectives has long been overlooked. We design a local perspective module to regress a newly defined variable named keyedge-ratios as the parameterization of the local shape distortion to account for the local perspective, and derive the object depth and yaw angle from it. Theoretically, this module does not rely on the pixel-wise size or position in the image of the objects, therefore independent of the camera intrinsic parameters. By plugging this module in existing monocular 3D object detection frameworks, we incorporate the local perspective distortion with global perspective effect for monocular 3D reasoning, and we demonstrate the effectiveness and superior performance over strong baseline methods in multiple datasets.

Lu Wen, Songan Zhang, H. Eric Tseng et al.

Meta reinforcement learning (Meta RL) has been amply explored to quickly learn an unseen task by transferring previously learned knowledge from similar tasks. However, most state-of-the-art algorithms require the meta-training tasks to have a dense coverage on the task distribution and a great amount of data for each of them. In this paper, we propose MetaDreamer, a context-based Meta RL algorithm that requires less real training tasks and data by doing meta-imagination and MDP-imagination. We perform meta-imagination by interpolating on the learned latent context space with disentangled properties, as well as MDP-imagination through the generative world model where physical knowledge is added to plain VAE networks. Our experiments with various benchmarks show that MetaDreamer outperforms existing approaches in data efficiency and interpolated generalization.

Minghan Zhu, Maani Ghaffari, Yuanxin Zhong et al.

This paper reports a new continuous 3D loss function for learning depth from monocular images. The dense depth prediction from a monocular image is supervised using sparse LIDAR points, which enables us to leverage available open source datasets with camera-LIDAR sensor suites during training. Currently, accurate and affordable range sensor is not readily available. Stereo cameras and LIDARs measure depth either inaccurately or sparsely/costly. In contrast to the current point-to-point loss evaluation approach, the proposed 3D loss treats point clouds as continuous objects; therefore, it compensates for the lack of dense ground truth depth due to LIDAR's sparsity measurements. We applied the proposed loss in three state-of-the-art monocular depth prediction approaches DORN, BTS, and Monodepth2. Experimental evaluation shows that the proposed loss improves the depth prediction accuracy and produces point-clouds with more consistent 3D geometric structures compared with all tested baselines, implying the benefit of the proposed loss on general depth prediction networks. A video demo of this work is available at https://youtu.be/5HL8BjSAY4Y.

Yiqun Dong, Yuanxin Zhong, Wenbo Yu et al.

The main goal of this paper is to introduce the data collection effort at Mcity targeting automated vehicle development. We captured a comprehensive set of data from a set of perception sensors (Lidars, Radars, Cameras) as well as vehicle steering/brake/throttle inputs and an RTK unit. Two in-cabin cameras record the human driver's behaviors for possible future use. The naturalistic driving on selected open roads is recorded at different time of day and weather conditions. We also perform designed choreography data collection inside the Mcity test facility focusing on vehicle to vehicle, and vehicle to vulnerable road user interactions which is quite unique among existing open-source datasets. The vehicle platform, data content, tags/labels, and selected analysis results are shown in this paper.

Geunseob Oh, Huei Peng

The task of predicting stochastic behaviors of road agents in diverse environments is a challenging problem for autonomous driving. To best understand scene contexts and produce diverse possible future states of the road agents adaptively in different environments, a prediction model should be probabilistic, multi-modal, context-driven, and general. We present Conditionalizing Variational AutoEncoders via Hypernetworks (CVAE-H); a conditional VAE that extensively leverages hypernetwork and performs generative tasks for high-dimensional problems like the prediction task. We first evaluate CVAE-H on simple generative experiments to show that CVAE-H is probabilistic, multi-modal, context-driven, and general. Then, we demonstrate that the proposed model effectively solves a self-driving prediction problem by producing accurate predictions of road agents in various environments.

Lu Wen, Songan Zhang, H. Eric Tseng et al.

Meta Reinforcement Learning (Meta-RL) has seen substantial advancements recently. In particular, off-policy methods were developed to improve the data efficiency of Meta-RL techniques. \textit{Probabilistic embeddings for actor-critic RL} (PEARL) is a leading approach for multi-MDP adaptation problems. A major drawback of many existing Meta-RL methods, including PEARL, is that they do not explicitly consider the safety of the prior policy when it is exposed to a new task for the first time. Safety is essential for many real-world applications, including field robots and Autonomous Vehicles (AVs). In this paper, we develop the PEARL PLUS (PEARL$^+$) algorithm, which optimizes the policy for both prior (pre-adaptation) safety and posterior (after-adaptation) performance. Building on top of PEARL, our proposed PEARL$^+$ algorithm introduces a prior regularization term in the reward function and a new Q-network for recovering the state-action value under prior context assumptions, to improve the robustness to task distribution shift and safety of the trained network exposed to a new task for the first time. The performance of PEARL$^+$ is validated by solving three safety-critical problems related to robots and AVs, including two MuJoCo benchmark problems. From the simulation experiments, we show that safety of the prior policy is significantly improved and more robust to task distribution shift compared to PEARL.

Minghan Zhu, Maani Ghaffari, Huei Peng

This paper proposes a correspondence-free method for point cloud rotational registration. We learn an embedding for each point cloud in a feature space that preserves the SO(3)-equivariance property, enabled by recent developments in equivariant neural networks. The proposed shape registration method achieves three major advantages through combining equivariant feature learning with implicit shape models. First, the necessity of data association is removed because of the permutation-invariant property in network architectures similar to PointNet. Second, the registration in feature space can be solved in closed-form using Horn's method due to the SO(3)-equivariance property. Third, the registration is robust to noise in the point cloud because of the joint training of registration and implicit shape reconstruction. The experimental results show superior performance compared with existing correspondence-free deep registration methods.

Yuanxin Zhong, Huei Peng

A real-time semantic 3D occupancy mapping framework is proposed in this paper. The mapping framework is based on the Bayesian kernel inference strategy from the literature. Two novel free space representations are proposed to efficiently construct training data and improve the mapping speed, which is a major bottleneck for real-world deployments. Our method achieves real-time mapping even on a consumer-grade CPU. Another important benefit is that our method can handle dynamic scenarios, thanks to the coverage completeness of the proposed algorithm. Experiments on real-world point cloud scan datasets are presented.

Yuanxin Zhong, Minghan Zhu, Huei Peng

A unified neural network structure is presented for joint 3D object detection and point cloud segmentation in this paper. We leverage rich supervision from both detection and segmentation labels rather than using just one of them. In addition, an extension based on single-stage object detectors is proposed based on the implicit function widely used in 3D scene and object understanding. The extension branch takes the final feature map from the object detection module as input, and produces an implicit function that generates semantic distribution for each point for its corresponding voxel center. We demonstrated the performance of our structure on nuScenes-lidarseg, a large-scale outdoor dataset. Our solution achieves competitive results against state-of-the-art methods in both 3D object detection and point cloud segmentation with little additional computation load compared with object detection solutions. The capability of efficient weakly supervision semantic segmentation of the proposed method is also validated by experiments.

Songan Zhang, Lu Wen, Huei Peng et al.

It is essential for an automated vehicle in the field to perform discretionary lane changes with appropriate roadmanship - driving safely and efficiently without annoying or endangering other road users - under a wide range of traffic cultures and driving conditions. While deep reinforcement learning methods have excelled in recent years and been applied to automated vehicle driving policy, there are concerns about their capability to quickly adapt to unseen traffic with new environment dynamics. We formulate this challenge as a multi-Markov Decision Processes (MDPs) adaptation problem and developed Meta Reinforcement Learning (MRL) driving policies to showcase their quick learning capability. Two types of distribution variation in environments were designed and simulated to validate the fast adaptation capability of resulting MRL driving policies which significantly outperform a baseline RL.

Minghan Zhu, Songan Zhang, Yuanxin Zhong et al.

This paper proposes a method to extract the position and pose of vehicles in the 3D world from a single traffic camera. Most previous monocular 3D vehicle detection algorithms focused on cameras on vehicles from the perspective of a driver, and assumed known intrinsic and extrinsic calibration. On the contrary, this paper focuses on the same task using uncalibrated monocular traffic cameras. We observe that the homography between the road plane and the image plane is essential to 3D vehicle detection and the data synthesis for this task, and the homography can be estimated without the camera intrinsics and extrinsics. We conduct 3D vehicle detection by estimating the rotated bounding boxes (r-boxes) in the bird's eye view (BEV) images generated from inverse perspective mapping. We propose a new regression target called tailed r-box and a dual-view network architecture which boosts the detection accuracy on warped BEV images. Experiments show that the proposed method can generalize to new camera and environment setups despite not seeing imaged from them during training.

Xinpeng Wang, Songan Zhang, Kuan-Hui Lee et al.

It is important to build a rigorous verification and validation (V&V) process to evaluate the safety of highly automated vehicles (HAVs) before their wide deployment on public roads. In this paper, we propose an interaction-aware framework for HAV safety evaluation which is suitable for some highly-interactive driving scenarios including highway merging, roundabout entering, etc. Contrary to existing approaches where the primary other vehicle (POV) takes predetermined maneuvers, we model the POV as a game-theoretic agent. To capture a wide variety of interactions between the POV and the vehicle under test (VUT), we characterize the interactive behavior using level-k game theory and social value orientation and train a diverse set of POVs using reinforcement learning. Moreover, we propose an adaptive test case sampling scheme based on the Gaussian process regression technique to generate customized and diverse challenging cases. The highway merging is used as the example scenario. We found the proposed method is able to capture a wide range of POV behaviors and achieve better coverage of the failure modes of the VUT compared with other evaluation approaches.

Zhong Cao, Shaobing Xu, Songan Zhang et al.

Safeguard functions such as those provided by advanced emergency braking (AEB) can provide another layer of safety for autonomous vehicles (AV). A smart safeguard function should adapt the activation conditions to the driving policy, to avoid unnecessary interventions as well as improve vehicle safety. This paper proposes a driving-policy adaptive safeguard (DPAS) design, including a collision avoidance strategy and an activation function. The collision avoidance strategy is designed in a reinforcement learning framework, obtained by Monte-Carlo Tree Search (MCTS). It can learn from past collisions and manipulate both braking and steering in stochastic traffics. The driving-policy adaptive activation function should dynamically assess current driving policy risk and kick in when an urgent threat is detected. To generate this activation function, MCTS' exploration and rollout modules are designed to fully evaluate the AV's current driving policy, and then explore other safer actions. In this study, the DPAS is validated with two typical highway-driving policies. The results are obtained through and 90,000 times in the stochastic and aggressive simulated traffic. The results are calibrated by naturalistic driving data and show that the proposed safeguard reduces the collision rate significantly without introducing more interventions, compared with the state-based benchmark safeguards. In summary, the proposed safeguard leverages the learning-based method in stochastic and emergent scenarios and imposes minimal influence on the driving policy.

Yuanxin Zhong, Minghan Zhu, Huei Peng

Object detection and tracking is a key task in autonomy. Specifically, 3D object detection and tracking have been an emerging hot topic recently. Although various methods have been proposed for object detection, uncertainty in the 3D detection and tracking tasks has been less explored. Uncertainty helps us tackle the error in the perception system and improve robustness. In this paper, we propose a method for improving target tracking performance by adding uncertainty regression to the SECOND detector, which is one of the most representative algorithms of 3D object detection. Our method estimates positional and dimensional uncertainties with Gaussian Negative Log-Likelihood (NLL) Loss for estimation and introduces von-Mises NLL Loss for angular uncertainty estimation. We fed the uncertainty output into a classical object tracking framework and proved that our method increased the tracking performance compared against the vanilla tracker with constant covariance assumption.

Pingping Lu, Chen Cui, Shaobing Xu et al.

AI-based lane detection algorithms were actively studied over the last few years. Many have demonstrated superior performance compared with traditional feature-based methods. The accuracy, however, is still generally in the low 80% or high 90%, or even lower when challenging images are used. In this paper, we propose a real-time lane detection system, called Scene Understanding Physics-Enhanced Real-time (SUPER) algorithm. The proposed method consists of two main modules: 1) a hierarchical semantic segmentation network as the scene feature extractor and 2) a physics enhanced multi-lane parameter optimization module for lane inference. We train the proposed system using heterogeneous data from Cityscapes, Vistas and Apollo, and evaluate the performance on four completely separate datasets (that were never seen before), including Tusimple, Caltech, URBAN KITTI-ROAD, and X-3000. The proposed approach performs the same or better than lane detection models already trained on the same dataset and performs well even on datasets it was never trained on. Real-world vehicle tests were also conducted. Preliminary test results show promising real-time lane-detection performance compared with the Mobileye.

Songan Zhang, Huei Peng, Subramanya Nageshrao et al.

Deep reinforcement learning methods have been widely used in recent years for autonomous vehicle's decision-making. A key issue is that deep neural networks can be fragile to adversarial attacks or other unseen inputs. In this paper, we address the latter issue: we focus on generating socially acceptable perturbations (SAP), so that the autonomous vehicle (AV agent), instead of the challenging vehicle (attacker), is primarily responsible for the crash. In our process, one attacker is added to the environment and trained by deep reinforcement learning to generate the desired perturbation. The reward is designed so that the attacker aims to fail the AV agent in a socially acceptable way. After training the attacker, the agent policy is evaluated in both the original naturalistic environment and the environment with one attacker. The results show that the agent policy which is safe in the naturalistic environment has many crashes in the perturbed environment.

Lu Wen, Jingliang Duan, Shengbo Eben Li et al.

Reinforcement learning (RL) is attracting increasing interests in autonomous driving due to its potential to solve complex classification and control problems. However, existing RL algorithms are rarely applied to real vehicles for two predominant problems: behaviours are unexplainable, and they cannot guarantee safety under new scenarios. This paper presents a safe RL algorithm, called Parallel Constrained Policy Optimization (PCPO), for two autonomous driving tasks. PCPO extends today's common actor-critic architecture to a three-component learning framework, in which three neural networks are used to approximate the policy function, value function and a newly added risk function, respectively. Meanwhile, a trust region constraint is added to allow large update steps without breaking the monotonic improvement condition. To ensure the feasibility of safety constrained problems, synchronized parallel learners are employed to explore different state spaces, which accelerates learning and policy-update. The simulations of two scenarios for autonomous vehicles confirm we can ensure safety while achieving fast learning.

Xianan Huang, Boqi Li, Huei Peng et al.

Shared Mobility-on-Demand using automated vehicles can reduce energy consumption and cost for future mobility. However, its full potential in energy saving has not been fully explored. An algorithm to minimize fleet fuel consumption while satisfying customers travel time constraints is developed in this paper. Numerical simulations with realistic travel demand and route choice are performed, showing that if fuel consumption is not considered, the MOD service can increase fleet fuel consumption due to increased empty vehicle mileage. With fuel consumption as part of the cost function, we can reduce total fuel consumption by 7 percent while maintaining a high level of mobility service.

Yaohui Guo, Vinay Varma Kalidindi, Mansur Arief et al.

Autonomous vehicles are expected to navigate in complex traffic scenarios with multiple surrounding vehicles. The correlations between road users vary over time, the degree of which, in theory, could be infinitely large, thus posing a great challenge in modeling and predicting the driving environment. In this paper, we propose a method to model multi-vehicle interactions using a stochastic vector field model and apply non-parametric Bayesian learning to extract the underlying motion patterns from a large quantity of naturalistic traffic data. We then use this model to reproduce the high-dimensional driving scenarios in a finitely tractable form. We use a Gaussian process to model multi-vehicle motion, and a Dirichlet process to assign each observation to a specific scenario. We verify the effectiveness of the proposed method on highway and intersection datasets from the NGSIM project, in which complex multi-vehicle interactions are prevalent. The results show that the proposed method can capture motion patterns from both settings, without imposing heroic prior, and hence demonstrate the potential application for a wide array of traffic situations. The proposed modeling method could enable simulation platforms and other testing methods designed for autonomous vehicle evaluation, to easily model and generate traffic scenarios emulating large scale driving data.

Geunseob Oh, Huei Peng

Forecasting trajectories of human-driven vehicles is a crucial problem in autonomous driving. Trajectory forecasting in the urban area is particularly hard due to complex interactions with cars and pedestrians, and traffic lights (TLs). Unlike the former that has been widely studied, the impact of TLs on the trajectory prediction has been rarely discussed. In this work, we first identify the less studied, perhaps overlooked impact of TLs. Second, we present a novel resolution that is mindful of the impact, inspired by the fact that human drives differently depending on signal phase (green, yellow, red) and timing (elapsed time). Central to the proposed approach is Human Policy Models which model how drivers react to various states of TLs by mapping a sequence of states of vehicles and TLs to a subsequent action (acceleration) of the vehicle. We then combine the Human Policy Models with a known transition function (system dynamics) to conduct a sequential prediction; thus our approach is viewed as Behavior Cloning. One novelty of our approach is the use of vehicle-to-infrastructure communications to obtain the future states of TLs. We demonstrate the impact of TL and the proposed approach using an ablation study for longitudinal trajectory forecasting tasks on real-world driving data recorded near a signalized intersection. Finally, we propose probabilistic (generative) Human Policy Models which provide probabilistic contexts and capture competing policies, e.g., pass or stop in the yellow-light dilemma zone.

Xianan Huang, Songan Zhang, Huei Peng

Automated vehicles can change the society by improved safety, mobility and fuel efficiency. However, due to the higher cost and change in business model, over the coming decades, the highly automated vehicles likely will continue to interact with many human-driven vehicles. In the past, the control/design of the highly automated (robotic) vehicles mainly considers safety and efficiency but failed to address the "driving culture" of surrounding human-driven vehicles. Thus, the robotic vehicles may demonstrate behaviors very different from other vehicles. We study this "driving etiquette" problem in this paper. As the first step, we report the key behavior parameters of human driven vehicles derived from a large naturalistic driving database. The results can be used to guide future algorithm design of highly automated vehicles or to develop realistic human-driven vehicle behavior model in simulations.

Ding Zhao, Huei Peng

As automated vehicles and their technology become more advanced and technically sophisticated, evaluation procedures that can measure the safety and reliability of these new driverless cars must develop far beyond existing safety tests. To get an accurate assessment in field tests, such cars would have to be driven millions or even billions of miles to arrive at an acceptable level of certainty - a time-consuming process that would cost tens of millions of dollars. Instead, researchers affiliated with the University of Michigan's Mcity connected and automated vehicle center have developed an accelerated evaluation process that eliminates the many miles of uneventful driving activity to filter out only the potentially dangerous driving situations where an automated vehicle needs to respond, creating a faster, less expensive testing program. This approach can reduce the amount of testing needed by a factor of 300 to 100,000 so that an automated vehicle driven for 1,000 test miles can yield the equivalent of 300,000 to 100 million miles of real-world driving. While more research and development needs to be done to perfect this technique, the accelerated evaluation procedure offers a ground-breaking solution for safe and efficient testing that is crucial to deploying automated vehicles.

Weichao Zhuang, Xiaowu Zhang, Ding Zhao et al.

Many of today's power-split hybrid electric vehicles (HEVs) utilize planetary gears (PGs) to connect the powertrain elements together. Recent power-split HEVs tend to use two PGs and some of them have multiple modes to achieve better fuel economy and driving performance. Looking to the future, hybrid powertrain technologies must be enhanced to design hybrid light trucks. For light trucks, the need for multi-mode and more PGs is stronger, to achieve the required performance. To systematically explore all the possible designs of multi-mode HEVs with three PGs, an efficient searching and optimization methodology is proposed. All possible clutch topology and modes for one existing configuration that uses three PGs were exhaustively searched. The launching performance is first used to screen out designs that fail to satisfy the required launching performance. A near-optimal and computationally efficient energy management strategy was then employed to identify designs that achieve good fuel economy. The proposed design process successfully identify 8 designs that achieve better launching performance and better fuel economy, while using fewer number of clutches than the benchmark and a patented design.

Ding Zhao, Huei Peng, Kazutoshi Nobukawa et al.

The behaviors of heavy vehicles drivers in mandatory and discretionary lane changes are analyzed in this paper. 640 mandatory and 2,035 discretionary lane change events were extracted from a naturalistic driving database. Variations in gap acceptance and lane change duration were investigated. Statistical analysis showed that mandatory lane changes are more aggressive in gap acceptance and lane change execution than discretionary lane changes. The results can be used for microscopic simulations, and design and evaluation of driver-assistant systems.

Kazutoshi Nobukawa, Shan Bao, David J. LeBlanc et al.

This paper presents an analysis of rearward gap acceptance characteristics of drivers of large trucks in highway lane change scenarios. The range between the vehicles was inferred from camera images using the estimated lane width obtained from the lane tracking camera as the reference. Six-hundred lane change events were acquired from a large-scale naturalistic driving data set. The kinematic variables from the image-based gap analysis were filtered by the weighted linear least squares in order to extrapolate them at the lane change time. In addition, the time-to-collision and required deceleration were computed, and potential safety threshold values are provided. The resulting range and range rate distributions showed directional discrepancies, i.e., in left lane changes, large trucks are often slower than other vehicles in the target lane, whereas they are usually faster in right lane changes. Video observations have confirmed that major motivations for changing lanes are different depending on the direction of move, i.e., moving to the left (faster) lane occurs due to a slower vehicle ahead or a merging vehicle on the right-hand side, whereas right lane changes are frequently made to return to the original lane after passing.

Baiming Chen, Ding Zhao, Huei Peng

Interactions between vehicles and pedestrians have always been a major problem in traffic safety. Experienced human drivers are able to analyze the environment and choose driving strategies that will help them avoid crashes. What is not yet clear, however, is how automated vehicles will interact with pedestrians. This paper proposes a new method for evaluating the safety and feasibility of the driving strategy of automated vehicles when encountering unsignalized crossings. MobilEye sensors installed on buses in Ann Arbor, Michigan, collected data on 2,973 valid crossing events. A stochastic interaction model was then created using a multivariate Gaussian mixture model. This model allowed us to simulate the movements of pedestrians reacting to an oncoming vehicle when approaching unsignalized crossings, and to evaluate the passing strategies of automated vehicles. A simulation was then conducted to demonstrate the evaluation procedure.

Ding Zhao, Henry Lam, Huei Peng et al.

Automated vehicles (AVs) must be evaluated thoroughly before their release and deployment. A widely-used evaluation approach is the Naturalistic-Field Operational Test (N-FOT), which tests prototype vehicles directly on the public roads. Due to the low exposure to safety-critical scenarios, N-FOTs are time-consuming and expensive to conduct. In this paper, we propose an accelerated evaluation approach for AVs. The results can be used to generate motions of the primary other vehicles to accelerate the verification of AVs in simulations and controlled experiments. Frontal collision due to unsafe cut-ins is the target crash type of this paper. Human-controlled vehicles making unsafe lane changes are modeled as the primary disturbance to AVs based on data collected by the University of Michigan Safety Pilot Model Deployment Program. The cut-in scenarios are generated based on skewed statistics of collected human driver behaviors, which generate risky testing scenarios while preserving the statistical information so that the safety benefits of AVs in non-accelerated cases can be accurately estimated. The Cross Entropy method is used to recursively search for the optimal skewing parameters. The frequencies of occurrence of conflicts, crashes and injuries are estimated for a modeled automated vehicle, and the achieved accelerated rate is around 2,000 to 20,000. In other words, in the accelerated simulations, driving for 1,000 miles will expose the AV with challenging scenarios that will take about 2 to 20 million miles of real-world driving to encounter. This technique thus has the potential to reduce greatly the development and validation time for AVs.