Xiongjun Guan

Zhiyu Pan, Xiongjun Guan, Jianjiang Feng et al.

Contactless fingerprint recognition has gained increasing attention due to its advantages in hygiene and acquisition flexibility. However, the absence of physical contact constraints introduces severe nonlinear geometric distortions caused by free finger poses in 3D space, resulting in a substantial cross-modal domain gap between contactless and conventional contact-based fingerprints. Existing solutions largely rely on explicit geometric correction or image enhancement, which are fragile under extreme pose variations. In this paper, we propose Identity-Consistent Multi-Pose Generation of Contactless Fingerprints (IMPOSE), a physics-inspired framework that synthesizes identity-preserving, multi-pose contactless fingerprint samples to empower recognition models. IMPOSE consists of three stages: (1) rolled fingerprint identity generation via latent diffusion with discrete codebook representations, (2) cross-modal translation from rolled to contactless modality guided by Sauvola-based local adaptive binarization as an identity anchor, and (3) physics-based multi-pose simulation through 3D finger model texture mapping and projection. The generated samples maintain strict identity consistency at the ridge topology level and spatial alignment with standard fingerprint coordinate space. Extensive experiments on the UWA and PolyU CL2CB databases demonstrate that fine-tuning fixed-length dense descriptors (FDD) with IMPOSE-synthesized data achieves state-of-the-art cross-modal matching, reducing EER to 8.74% on UWA and 2.26% on PolyU CL2CB. Synthetic data also yields consistent gains across mainstream representations including DeepPrint and AFRNet, and the hybrid strategy combining synthetic and real data achieves the best overall results. The code and generated samples are available at https://github.com/Yu-Yy/IMPOSE.

Xiongjun Guan, Jianjiang Feng, Jie Zhou

Three-dimensional (3D) fingerprints preserve global finger geometry and local ridge structure while avoiding contact-induced deformation, but they remain difficult to integrate with legacy two-dimensional (2D) fingerprint systems. This paper addresses the intermediate stage between 3D acquisition and cross-modal matching, and presents a unified framework for 3D fingerprint preprocessing and registration across contactless and contact-based 2D modalities. The framework combines four components: 1) a nonparametric visualization and unwrapping method that converts a 3D fingerprint point cloud into a rolled-equivalent 2D representation without relying on a global finger-shape model; 2) a point-cloud fusion pipeline that registers and mosaics multiple partial 3D captures into a more complete fingerprint model; 3) an ellipse-based pose normalization method for canonical finger alignment; and 4) a pose-aware cross-modal registration strategy that improves compatibility between 3D fingerprints and both contactless and contact-based 2D fingerprints. Experiments on a self-collected multimodal fingerprint database containing 150 fingers show that the proposed framework achieves ridge-level 3D registration accuracy, robust pose estimation, and consistent gains in 2D compatibility. In particular, the 3D fusion error is concentrated around 0.09 mm, contactless 2D--3D registration reaches ridge-scale projection accuracy, and pose-aware unwrapping improves genuine matching scores relative to generic 3D unwrapping. These results support the use of 3D fingerprints as an effective geometric bridge across heterogeneous fingerprint modalities.

Jun Xie, Yingjian Zhu, Feng Chen et al.

In this paper, we present our solution for the semi-supervised learning track (MER-SEMI) in MER2025. We propose a comprehensive framework, grounded in the principle that "more is better," to construct a robust Mixture of Experts (MoE) emotion recognition system. Our approach integrates a diverse range of input modalities as independent experts, including novel signals such as knowledge from large Vision-Language Models (VLMs) and temporal Action Unit (AU) information. To effectively utilize unlabeled data, we introduce a consensus-based pseudo-labeling strategy, generating high-quality labels from the agreement between a baseline model and Gemini, which are then used in a two-stage training paradigm. Finally, we employ a multi-expert voting ensemble combined with a rule-based re-ranking process to correct prediction bias and better align the outputs with human preferences. Evaluated on the MER2025-SEMI challenge dataset, our method achieves an F1-score of 0.8772 on the test set, ranking 2nd in the track. Our code is available at https://github.com/zhuyjan/MER2025-MRAC25.

Jun Xie, Xiongjun Guan, Yingjian Zhu et al.

In this paper, we present the runner-up solution for the Ego4D EgoSchema Challenge at CVPR 2025 (Confirmed on May 20, 2025). Inspired by the success of large models, we evaluate and leverage leading accessible multimodal large models and adapt them to video understanding tasks via few-shot learning and model ensemble strategies. Specifically, diversified prompt styles and process paradigms are systematically explored and evaluated to effectively guide the attention of large models, fully unleashing their powerful generalization and adaptability abilities. Experimental results demonstrate that, with our carefully designed approach, directly utilizing an individual multimodal model already outperforms the previous state-of-the-art (SOTA) method which includes several additional processes. Besides, an additional stage is further introduced that facilitates the cooperation and ensemble of periodic results, which achieves impressive performance improvements. We hope this work serves as a valuable reference for the practical application of large models and inspires future research in the field. Our Code is available at https://github.com/XiongjunGuan/EgoSchema-CVPR25.

Zhiyu Pan, Xiongjun Guan, Yongjie Duan et al.

Fixed-length fingerprint representations, which map each fingerprint to a compact and fixed-size feature vector, are computationally efficient and well-suited for large-scale matching. However, designing a robust representation that effectively handles diverse fingerprint modalities, pose variations, and noise interference remains a significant challenge. In this work, we propose a fixed-length dense descriptor of fingerprints, and introduce FLARE-a fingerprint matching framework that integrates the Fixed-Length dense descriptor with pose-based Alignment and Robust Enhancement. This fixed-length representation employs a three-dimensional dense descriptor to effectively capture spatial relationships among fingerprint ridge structures, enabling robust and locally discriminative representations. To ensure consistency within this dense feature space, FLARE incorporates pose-based alignment using complementary estimation methods, along with dual enhancement strategies that refine ridge clarity while preserving the original fingerprint modality. The proposed dense descriptor supports fixed-length representation while maintaining spatial correspondence, enabling fast and accurate similarity computation. Extensive experiments demonstrate that FLARE achieves superior performance across rolled, plain, latent, and contactless fingerprints, significantly outperforming existing methods in cross-modality and low-quality scenarios. Further analysis validates the effectiveness of the dense descriptor design, as well as the impact of alignment and enhancement modules on the accuracy of dense descriptor matching. Experimental results highlight the effectiveness and generalizability of FLARE as a unified and scalable solution for robust fingerprint representation and matching. The implementation and code will be publicly available at https://github.com/Yu-Yy/FLARE.

Xiongjun Guan, Zhiyu Pan, Jianjiang Feng et al.

Two-dimensional pose estimation plays a crucial role in fingerprint recognition by facilitating global alignment and reduce pose-induced variations. However, existing methods are still unsatisfactory when handling with large angle or small area inputs. These limitations are particularly pronounced on fingerprints captured by under-screen fingerprint sensors in smartphones. In this paper, we present a novel dual-modal input based network for under-screen fingerprint pose estimation. Our approach effectively integrates two distinct yet complementary modalities: texture details extracted from ridge patches through the under-screen fingerprint sensor, and rough contours derived from capacitive images obtained via the touch screen. This collaborative integration endows our network with more comprehensive and discriminative information, substantially improving the accuracy and stability of pose estimation. A decoupled probability distribution prediction task is designed, instead of the traditional supervised forms of numerical regression or heatmap voting, to facilitate the training process. Additionally, we incorporate a Mixture of Experts (MoE) based feature fusion mechanism and a relationship driven cross-domain knowledge transfer strategy to further strengthen feature extraction and fusion capabilities. Extensive experiments are conducted on several public datasets and two private datasets. The results indicate that our method is significantly superior to previous state-of-the-art (SOTA) methods and remarkably boosts the recognition ability of fingerprint recognition algorithms. Our code is available at https://github.com/XiongjunGuan/DRACO.

Xiongjun Guan, Zhiyu Pan, Jianjiang Feng et al.

Finger pose offers promising opportunities to expand human computer interaction capability of touchscreen devices. Existing finger pose estimation algorithms that can be implemented in portable devices predominantly rely on capacitive images, which are currently limited to estimating pitch and yaw angles and exhibit reduced accuracy when processing large-angle inputs (especially when it is greater than 45 degrees). In this paper, we propose BiFingerPose, a novel bimodal based finger pose estimation algorithm capable of simultaneously and accurately predicting comprehensive finger pose information. A bimodal input is explored, including a capacitive image and a fingerprint patch obtained from the touchscreen with an under-screen fingerprint sensor. Our approach leads to reliable estimation of roll angle, which is not achievable using only a single modality. In addition, the prediction performance of other pose parameters has also been greatly improved. The evaluation of a 12-person user study on continuous and discrete interaction tasks further validated the advantages of our approach. Specifically, BiFingerPose outperforms previous SOTA methods with over 21% improvement in prediction performance, 2.5 times higher task completion efficiency, and 23% better user operation accuracy, demonstrating its practical superiority. Finally, we delineate the application space of finger pose with respect to enhancing authentication security and improving interactive experiences, and develop corresponding prototypes to showcase the interaction potential. Our code will be available at https://github.com/XiongjunGuan/DualFingerPose.

Zhiyu Pan, Xiongjun Guan, Yongjie Duan et al.

Fingerprint matching under diverse capture conditions remains a fundamental challenge in biometric recognition. To achieve robust and accurate performance in such scenarios, we propose DMD, a minutiae-anchored local dense representation which captures both fine-grained ridge textures and discriminative minutiae features in a spatially structured manner. Specifically, descriptors are extracted from local patches centered and oriented on each detected minutia, forming a three-dimensional tensor, where two dimensions represent spatial locations on the fingerprint plane and the third encodes semantic features. This representation explicitly captures abstract features of local image patches, enabling a multi-level, fine-grained description that aggregates information from multiple minutiae and their surrounding ridge structures. Furthermore, thanks to its strong spatial correspondence with the patch image, DMD allows for the use of foreground segmentation masks to identify valid descriptor regions. During matching, comparisons are then restricted to overlapping foreground areas, improving efficiency and robustness. Extensive experiments on rolled, plain, parital, contactless, and latent fingerprint datasets demonstrate the effectiveness and generalizability of the proposed method. It achieves state-of-the-art accuracy across multiple benchmarks while maintaining high computational efficiency, showing strong potential for large-scale fingerprint recognition. Corresponding code is available at https://github.com/Yu-Yy/DMD.

Zhiyu Pan, Yongjie Duan, Xiongjun Guan et al.

Latent fingerprint matching is a daunting task, primarily due to the poor quality of latent fingerprints. In this study, we propose a deep-learning based dense minutia descriptor (DMD) for latent fingerprint matching. A DMD is obtained by extracting the fingerprint patch aligned by its central minutia, capturing detailed minutia information and texture information. Our dense descriptor takes the form of a three-dimensional representation, with two dimensions associated with the original image plane and the other dimension representing the abstract features. Additionally, the extraction process outputs the fingerprint segmentation map, ensuring that the descriptor is only valid in the foreground region. The matching between two descriptors occurs in their overlapping regions, with a score normalization strategy to reduce the impact brought by the differences outside the valid area. Our descriptor achieves state-of-the-art performance on several latent fingerprint datasets. Overall, our DMD is more representative and interpretable compared to previous methods.

Xiongjun Guan, Zhiyu Pan, Jianjiang Feng et al.

Currently, portable electronic devices are becoming more and more popular. For lightweight considerations, their fingerprint recognition modules usually use limited-size sensors. However, partial fingerprints have few matchable features, especially when there are differences in finger pressing posture or image quality, which makes partial fingerprint verification challenging. Most existing methods regard fingerprint position rectification and identity verification as independent tasks, ignoring the coupling relationship between them -- relative pose estimation typically relies on paired features as anchors, and authentication accuracy tends to improve with more precise pose alignment. In this paper, we propose a novel framework for joint identity verification and pose alignment of partial fingerprint pairs, aiming to leverage their inherent correlation to improve each other. To achieve this, we present a multi-task CNN (Convolutional Neural Network)-Transformer hybrid network, and design a pre-training task to enhance the feature extraction capability. Experiments on multiple public datasets (NIST SD14, FVC2002 DB1A & DB3A, FVC2004 DB1A & DB2A, FVC2006 DB1A) and an in-house dataset show that our method achieves state-of-the-art performance in both partial fingerprint verification and relative pose estimation, while being more efficient than previous methods.

Xiongjun Guan, Jianjiang Feng, Jie Zhou

Fingerprint dense registration aims to finely align fingerprint pairs at the pixel level, thereby reducing intra-class differences caused by distortion. Unfortunately, traditional methods exhibited subpar performance when dealing with low-quality fingerprints while suffering from slow inference speed. Although deep learning based approaches shows significant improvement in these aspects, their registration accuracy is still unsatisfactory. In this paper, we propose a Phase-aggregated Dual-branch Registration Network (PDRNet) to aggregate the advantages of both types of methods. A dual-branch structure with multi-stage interactions is introduced between correlation information at high resolution and texture feature at low resolution, to perceive local fine differences while ensuring global stability. Extensive experiments are conducted on more comprehensive databases compared to previous works. Experimental results demonstrate that our method reaches the state-of-the-art registration performance in terms of accuracy and robustness, while maintaining considerable competitiveness in efficiency.

Xiongjun Guan, Yongjie Duan, Jianjiang Feng et al.

Skin distortion is a long standing challenge in fingerprint matching, which causes false non-matches. Previous studies have shown that the recognition rate can be improved by estimating the distortion field from a distorted fingerprint and then rectifying it into a normal fingerprint. However, existing rectification methods are based on principal component representation of distortion fields, which is not accurate and are very sensitive to finger pose. In this paper, we propose a rectification method where a self-reference based network is utilized to directly estimate the dense distortion field of distorted fingerprint instead of its low dimensional representation. This method can output accurate distortion fields of distorted fingerprints with various finger poses and distortion patterns. We conducted experiments on FVC2004 DB1\_A, expanded Tsinghua Distorted Fingerprint database (with additional distorted fingerprints in diverse finger poses and distortion patterns) and a latent fingerprint database. Experimental results demonstrate that our proposed method achieves the state-of-the-art rectification performance in terms of distortion field estimation and rectified fingerprint matching.

Xiongjun Guan, Yongjie Duan, Jianjiang Feng et al.

Skin distortion is a long standing challenge in fingerprint matching, which causes false non-matches. Previous studies have shown that the recognition rate can be improved by estimating the distortion field from a distorted fingerprint and then rectifying it into a normal fingerprint. However, existing rectification methods are based on principal component representation of distortion fields, which is not accurate and are very sensitive to finger pose. In this paper, we propose a rectification method where a self-reference based network is utilized to directly estimate the dense distortion field of distorted fingerprint instead of its low dimensional representation. This method can output accurate distortion fields of distorted fingerprints with various finger poses. Considering the limited number and variety of distorted fingerprints in the existing public dataset, we collected more distorted fingerprints with diverse finger poses and distortion patterns as a new database. Experimental results demonstrate that our proposed method achieves the state-of-the-art rectification performance in terms of distortion field estimation and rectified fingerprint matching.

Jun Xie, Zhaoran Zhao, Xiongjun Guan et al.

We propose a novel framework for open-ended video question answering that enhances reasoning depth and robustness in complex real-world scenarios, as benchmarked on the CVRR-ES dataset. Existing Video-Large Multimodal Models (Video-LMMs) often exhibit limited contextual understanding, weak temporal modeling, and poor generalization to ambiguous or compositional queries. To address these challenges, we introduce a prompting-and-response integration mechanism that coordinates multiple heterogeneous Video-Language Models (VLMs) via structured chains of thought, each tailored to distinct reasoning pathways. An external Large Language Model (LLM) serves as an evaluator and integrator, selecting and fusing the most reliable responses. Extensive experiments demonstrate that our method significantly outperforms existing baselines across all evaluation metrics, showcasing superior generalization and robustness. Our approach offers a lightweight, extensible strategy for advancing multimodal reasoning without requiring model retraining, setting a strong foundation for future Video-LMM development.

Xiongjun Guan, Jianjiang Feng, Jie Zhou

In order to make 3D fingerprints compatible with traditional 2D flat fingerprints, a common practice is to unfold the 3D fingerprint into a 2D rolled fingerprint, which is then matched with the flat fingerprints by traditional 2D fingerprint recognition algorithms. The problem with this method is that there may be large elastic deformation between the unfolded rolled fingerprint and flat fingerprint, which affects the recognition rate. In this paper, we propose a pose-specific 3D fingerprint unfolding algorithm to unfold the 3D fingerprint using the same pose as the flat fingerprint. Our experiments show that the proposed unfolding algorithm improves the compatibility between 3D fingerprint and flat fingerprint and thus leads to higher genuine matching scores.