Weijia Li

Jinwang Wang, Lingxuan Meng, Weijia Li et al.

Extracting building footprints from aerial images is essential for precise urban mapping with photogrammetric computer vision technologies. Existing approaches mainly assume that the roof and footprint of a building are well overlapped, which may not hold in off-nadir aerial images as there is often a big offset between them. In this paper, we propose an offset vector learning scheme, which turns the building footprint extraction problem in off-nadir images into an instance-level joint prediction problem of the building roof and its corresponding "roof to footprint" offset vector. Thus the footprint can be estimated by translating the predicted roof mask according to the predicted offset vector. We further propose a simple but effective feature-level offset augmentation module, which can significantly refine the offset vector prediction by introducing little extra cost. Moreover, a new dataset, Buildings in Off-Nadir Aerial Images (BONAI), is created and released in this paper. It contains 268,958 building instances across 3,300 aerial images with fully annotated instance-level roof, footprint, and corresponding offset vector for each building. Experiments on the BONAI dataset demonstrate that our method achieves the state-of-the-art, outperforming other competitors by 3.37 to 7.39 points in F1-score. The codes, datasets, and trained models are available at https://github.com/jwwangchn/BONAI.git.

Weijia Li, Shun Hu, Yanfei Kang

Forecast reconciliation usually starts from a fixed measurement system and asks how forecasts should be projected onto a coherent space. We ask a different question: which additional linear measurements should be forecast and included in the reconciliation system? We propose REGAIN, a reconciliation-gain framework that learns normalized auxiliary directions, forecasts the induced series with a frozen forecasting oracle, and selects directions by their target-weighted loss reduction after augmented generalized least-squares reconciliation. Unlike variance-based components or predictability-based auxiliary selection, REGAIN optimizes the downstream effect of an auxiliary measurement on the final reconciled forecasts. We provide a statistical characterization showing that useful auxiliary directions must provide complementary information about unresolved target uncertainty, rather than merely being easy to forecast. The analysis also clarifies the covariance-risk reduction mechanism, the role of bias changes in realized quadratic risk, and the stability of estimated gain signals. A stagewise learning algorithm with held-out gain screening is developed, together with an optional joint refinement step. Experiments on Beijing PM2.5 and Australian Tourism data show that gain-selected measurements can improve both ordinary multivariate and hierarchical forecasts, especially when they reveal residual uncertainty not captured by the original measurement system.

Junyan Ye, Zhutao Lv, Weijia Li et al.

Cross-view geolocalization identifies the geographic location of street view images by matching them with a georeferenced satellite database. Significant challenges arise due to the drastic appearance and geometry differences between views. In this paper, we propose a new approach for cross-view image geo-localization, i.e., the Panorama-BEV Co-Retrieval Network. Specifically, by utilizing the ground plane assumption and geometric relations, we convert street view panorama images into the BEV view, reducing the gap between street panoramas and satellite imagery. In the existing retrieval of street view panorama images and satellite images, we introduce BEV and satellite image retrieval branches for collaborative retrieval. By retaining the original street view retrieval branch, we overcome the limited perception range issue of BEV representation. Our network enables comprehensive perception of both the global layout and local details around the street view capture locations. Additionally, we introduce CVGlobal, a global cross-view dataset that is closer to real-world scenarios. This dataset adopts a more realistic setup, with street view directions not aligned with satellite images. CVGlobal also includes cross-regional, cross-temporal, and street view to map retrieval tests, enabling a comprehensive evaluation of algorithm performance. Our method excels in multiple tests on common cross-view datasets such as CVUSA, CVACT, VIGOR, and our newly introduced CVGlobal, surpassing the current state-of-the-art approaches. The code and datasets can be found at \url{https://github.com/yejy53/EP-BEV}.

Weijia Li, Yawen Lai, Linning Xu et al.

This paper presents OmniCity, a new dataset for omnipotent city understanding from multi-level and multi-view images. More precisely, the OmniCity contains multi-view satellite images as well as street-level panorama and mono-view images, constituting over 100K pixel-wise annotated images that are well-aligned and collected from 25K geo-locations in New York City. To alleviate the substantial pixel-wise annotation efforts, we propose an efficient street-view image annotation pipeline that leverages the existing label maps of satellite view and the transformation relations between different views (satellite, panorama, and mono-view). With the new OmniCity dataset, we provide benchmarks for a variety of tasks including building footprint extraction, height estimation, and building plane/instance/fine-grained segmentation. Compared with the existing multi-level and multi-view benchmarks, OmniCity contains a larger number of images with richer annotation types and more views, provides more benchmark results of state-of-the-art models, and introduces a novel task for fine-grained building instance segmentation on street-level panorama images. Moreover, OmniCity provides new problem settings for existing tasks, such as cross-view image matching, synthesis, segmentation, detection, etc., and facilitates the developing of new methods for large-scale city understanding, reconstruction, and simulation. The OmniCity dataset as well as the benchmarks will be available at https://city-super.github.io/omnicity.

Weijia Li, Haoen Xiang, Tianxu Wang et al.

Modern autonomous vehicle perception systems are often constrained by occlusions, blind spots, and limited sensing range. While existing cooperative perception paradigms, such as Vehicle-to-Vehicle (V2V) and Vehicle-to-Infrastructure (V2I), have demonstrated their effectiveness in mitigating these challenges, they remain limited to ground-level collaboration and cannot fully address large-scale occlusions or long-range perception in complex environments. To advance research in cross-view cooperative perception, we present V2U4Real, the first large-scale real-world multi-modal dataset for Vehicle-to-UAV (V2U) cooperative object perception. V2U4Real is collected by a ground vehicle and a UAV equipped with multi-view LiDARs and RGB cameras. The dataset covers urban streets, university campuses, and rural roads under diverse traffic scenarios, comprising over 56K LiDAR frames, 56K multi-view camera images, and 700K annotated 3D bounding boxes across four classes. To support a wide range of research tasks, we establish benchmarks for single-agent 3D object detection, cooperative 3D object detection, and object tracking. Comprehensive evaluations of several state-of-the-art models demonstrate the effectiveness of V2U cooperation in enhancing perception robustness and long-range awareness. The V2U4Real dataset and codebase is available at https://github.com/VjiaLi/V2U4Real.

Jiaqing Liang, Jinyi Han, Weijia Li et al.

Long-horizon large language model (LLM) agents are fundamentally limited by context. As interactions become longer, tool descriptions, retrieved memories, and raw environmental feedback accumulate and push out the information needed for decision-making. At the same time, useful experience gained from tasks is often lost across episodes. We argue that long-horizon performance is determined not by context length, but by how much decision-relevant information is maintained within a finite context budget. We present GenericAgent (GA), a general-purpose, self-evolving LLM agent system built around a single principle: context information density maximization. GA implements this through four closely connected components: a minimal atomic tool set that keeps the interface simple, a hierarchical on-demand memory that only shows a small high-level view by default, a self-evolution mechanism that turns verified past trajectories into reusable SOPs and executable code, and a context truncation and compression layer that maintains information density during long executions. Across task completion, tool use efficiency, memory effectiveness, self-evolution, and web browsing, GA consistently outperforms leading agent systems while using significantly fewer tokens and interactions, and it continues to evolve over time. Project: https://github.com/lsdefine/GenericAgent

Hengrui Kang, Zhuangcheng Gu, Zhiyuan Zhao et al.

Document AI has advanced rapidly and is attracting increasing attention. Yet, while most efforts have focused on document layout analysis (DLA), its generative counterpart, document layout generation, remains underexplored. A major obstacle lies in the scarcity of diverse layouts: academic papers with Manhattan-style structures dominate existing studies, while open-world genres such as newspapers and magazines remain severely underrepresented. To address this gap, we curate OmniLayout-1M, the first million-scale dataset of diverse document layouts, covering six common document types and comprising contemporary layouts collected from multiple sources. Moreover, since existing methods struggle in complex domains and often fail to arrange long sequences coherently, we introduce OmniLayout-LLM, a 0.5B model with designed two-stage Coarse-to-Fine learning paradigm: 1) learning universal layout principles from OmniLayout-1M with coarse category definitions, and 2) transferring the knowledge to a specific domain with fine-grained annotations. Extensive experiments demonstrate that our approach achieves strong performance on multiple domains in M$^{6}$Doc dataset, substantially surpassing both existing layout generation experts and several latest general-purpose LLMs. Our code, models, and dataset will be publicly released.

Bin Wang, Fan Wu, Xiao Han et al.

The integration of visual encoders and large language models (LLMs) has driven recent progress in multimodal large language models (MLLMs). However, the scarcity of high-quality instruction-tuning data for vision-language tasks remains a challenge. The current leading paradigm, such as LLaVA, relies on language-only GPT-4 to generate data, which requires pre-annotated image captions and detection bounding boxes, suffering from understanding image details. A practical solution to this problem would be to utilize the available multimodal large language models (MLLMs) to generate instruction data for vision-language tasks. However, it's worth noting that the currently accessible MLLMs are not as powerful as their LLM counterparts, as they tend to produce inadequate responses and generate false information. As a solution for addressing the current issue, this paper proposes the Visual Instruction Generation and Correction (VIGC) framework that enables multimodal large language models to generate instruction-tuning data and progressively enhance its quality on-the-fly. Specifically, Visual Instruction Generation (VIG) guides the vision-language model to generate diverse instruction-tuning data. To ensure generation quality, Visual Instruction Correction (VIC) adopts an iterative update mechanism to correct any inaccuracies in data produced by VIG, effectively reducing the risk of hallucination. Leveraging the diverse, high-quality data generated by VIGC, we finetune mainstream models and validate data quality based on various evaluations. Experimental results demonstrate that VIGC not only compensates for the shortcomings of language-only data generation methods, but also effectively enhances the benchmark performance. The models, datasets, and code are available at https://opendatalab.github.io/VIGC.

Yuan Chen, Zichen Wen, Yuzhou Wu et al.

Multimodal Large Language Models (MLLMs) deliver strong vision-language performance but at high computational cost, driven by numerous visual tokens processed by the Vision Transformer (ViT) encoder. Existing token pruning strategies are inadequate: LLM-stage token pruning overlooks the ViT's overhead, while conventional ViT token pruning, without language guidance, risks discarding textually critical visual cues and introduces feature distortions amplified by the ViT's bidirectional attention. To meet these challenges, we propose IPCV, a training-free, information-preserving compression framework for MLLM visual encoders. IPCV enables aggressive token pruning inside the ViT via Neighbor-Guided Reconstruction (NGR) that temporarily reconstructs pruned tokens to participate in attention with minimal overhead, then fully restores them before passing to the LLM. Besides, we introduce Attention Stabilization (AS) to further alleviate the negative influence from token pruning by approximating the K/V of pruned tokens. It can be directly applied to previous LLM-side token pruning methods to enhance their performance. Extensive experiments show that IPCV substantially reduces end-to-end computation and outperforms state-of-the-art training-free token compression methods across diverse image and video benchmarks. Our code is available at https://github.com/Perkzi/IPCV.

Junyan Ye, Jun He, Zilong Huang et al.

Image generation models have evolved from text-conditioned pixel synthesis toward multimodal agents endowed with visual comprehension and tool invocation capabilities. Yet, existing agents remain at the mercy of underlying black-box image models. Their workflow is trapped in a repetitive cycle of prompt rewriting for generation refinement, leaving them with no mechanism to directly manipulate the canvas. In essence, the potential of LLMs to serve as a genuine "brush" for precise visual construction remains largely untapped. In this paper, we propose GenClaw, a code-driven agentic image generation paradigm that empowers the agent to create like a human artist: first conceptualizing, then sketching, and finally coloring. Specifically, the agent first constructs the conceptual knowledge and context through search and reasoning. It then utilizes code (e.g., SVG, HTML, Three.js) to render executable visual sketches. Finally, it employs an image generation model to supplement textures, materials, and photorealism. In this workflow, code serves as a controllable intermediate canvas bridging linguistic reasoning and pixel synthesis, seamlessly integrating programmatic logic with the visual expressiveness of generative models. By transforming image generation from a black-box paradigm into a staged process akin to authentic human creation, GenClaw offers a step toward for highly controllable and interpretable visual generation systems.

Leqi Zhu, Junyan Ye, Kaiqing Lin et al.

The development of generative artificial intelligence technologies has propelled the visual realism of synthetic images to an unprecedented level. Although current interpretable detection methods based on Large Multimodal Models (LMMs) have made certain progress, they still rely on imitation learning derived from massive volumes of forged data. Consequently, they lack genuine causal reasoning capabilities and are prone to explanatory hallucinations. To overcome this bottleneck, we propose FakeVLM-R1, aiming to endow the model with human-like critical thinking capabilities when performing synthetic detection tasks. Building upon Supervised Fine-Tuning (SFT), this framework integrates Group Relative Policy Optimization (GRPO) with a Critical Thinking Chain-of-Thought (CoT) mechanism. During the inference phase, the model executes a "bidirectional dialectical reasoning" process: while proposing a forgery hypothesis, it must simultaneously invoke physical commonsense to construct an authenticity counter-proof. Furthermore, we constructed the FakeClue++ dataset with high-quality samples, which extensively introduces annotations guided by the physical laws of authentic images, providing a unified authenticity anchor for the model. Experiments confirm that FakeVLM-R1 achieves SOTA performance the evaluated models across multiple benchmarks. It not only achieves high-precision, logically interpretable detection but also resolves the over-rejection bias of existing methods against real images, demonstrating generalization and robustness against perturbations.

Baichuan Zhou, Haote Yang, Dairong Chen et al.

Recent evaluations of Large Multimodal Models (LMMs) have explored their capabilities in various domains, with only few benchmarks specifically focusing on urban environments. Moreover, existing urban benchmarks have been limited to evaluating LMMs with basic region-level urban tasks under singular views, leading to incomplete evaluations of LMMs' abilities in urban environments. To address these issues, we present UrBench, a comprehensive benchmark designed for evaluating LMMs in complex multi-view urban scenarios. UrBench contains 11.6K meticulously curated questions at both region-level and role-level that cover 4 task dimensions: Geo-Localization, Scene Reasoning, Scene Understanding, and Object Understanding, totaling 14 task types. In constructing UrBench, we utilize data from existing datasets and additionally collect data from 11 cities, creating new annotations using a cross-view detection-matching method. With these images and annotations, we then integrate LMM-based, rule-based, and human-based methods to construct large-scale high-quality questions. Our evaluations on 21 LMMs show that current LMMs struggle in the urban environments in several aspects. Even the best performing GPT-4o lags behind humans in most tasks, ranging from simple tasks such as counting to complex tasks such as orientation, localization and object attribute recognition, with an average performance gap of 17.4%. Our benchmark also reveals that LMMs exhibit inconsistent behaviors with different urban views, especially with respect to understanding cross-view relations.

Weijia Li, Jun He, Junyan Ye et al.

Satellite-to-street view synthesis aims at generating a realistic street-view image from its corresponding satellite-view image. Although stable diffusion models have exhibit remarkable performance in a variety of image generation applications, their reliance on similar-view inputs to control the generated structure or texture restricts their application to the challenging cross-view synthesis task. In this work, we propose CrossViewDiff, a cross-view diffusion model for satellite-to-street view synthesis. To address the challenges posed by the large discrepancy across views, we design the satellite scene structure estimation and cross-view texture mapping modules to construct the structural and textural controls for street-view image synthesis. We further design a cross-view control guided denoising process that incorporates the above controls via an enhanced cross-view attention module. To achieve a more comprehensive evaluation of the synthesis results, we additionally design a GPT-based scoring method as a supplement to standard evaluation metrics. We also explore the effect of different data sources (e.g., text, maps, building heights, and multi-temporal satellite imagery) on this task. Results on three public cross-view datasets show that CrossViewDiff outperforms current state-of-the-art on both standard and GPT-based evaluation metrics, generating high-quality street-view panoramas with more realistic structures and textures across rural, suburban, and urban scenes. The code and models of this work will be released at https://opendatalab.github.io/CrossViewDiff/.

Lihan Tong, Yun Liu, Weijia Li et al.

Single-image dehazing is a pivotal challenge in computer vision that seeks to remove haze from images and restore clean background details. Recognizing the limitations of traditional physical model-based methods and the inefficiencies of current attention-based solutions, we propose a new dehazing network combining an innovative Haze-Aware Attention Module (HAAM) with a Multiscale Frequency Enhancement Module (MFEM). The HAAM is inspired by the atmospheric scattering model, thus skillfully integrating physical principles into high-dimensional features for targeted dehazing. It picks up on latent features during the image restoration process, which gives a significant boost to the metrics, while the MFEM efficiently enhances high-frequency details, thus sidestepping wavelet or Fourier transform complexities. It employs multiscale fields to extract and emphasize key frequency components with minimal parameter overhead. Integrated into a simple U-Net framework, our Haze-Aware Attention Network (HAA-Net) for single-image dehazing significantly outperforms existing attention-based and transformer models in efficiency and effectiveness. Tested across various public datasets, the HAA-Net sets new performance benchmarks. Our work not only advances the field of image dehazing but also offers insights into the design of attention mechanisms for broader applications in computer vision.

Juepeng Zheng, Shuai Yuan, Weijia Li et al.

Powered by the advances of optical remote sensing sensors, the production of very high spatial resolution multispectral images provides great potential for achieving cost-efficient and high-accuracy forest inventory and analysis in an automated way. Lots of studies that aim at providing an inventory to the level of each individual tree have generated a variety of methods for Individual Tree Crown Detection and Delineation (ITCD). This review covers ITCD methods for detecting and delineating individual tree crowns, and systematically reviews the past and present of ITCD-related researches applied to the optical remote sensing images. With the goal to provide a clear knowledge map of existing ITCD efforts, we conduct a comprehensive review of recent ITCD papers to build a meta-data analysis, including the algorithm, the study site, the tree species, the sensor type, the evaluation method, etc. We categorize the reviewed methods into three classes: (1) traditional image processing methods (such as local maximum filtering, image segmentation, etc.); (2) traditional machine learning methods (such as random forest, decision tree, etc.); and (3) deep learning based methods. With the deep learning-oriented approaches contributing a majority of the papers, we further discuss the deep learning-based methods as semantic segmentation and object detection methods. In addition, we discuss four ITCD-related issues to further comprehend the ITCD domain using optical remote sensing data, such as comparisons between multi-sensor based data and optical data in ITCD domain, comparisons among different algorithms and different ITCD tasks, etc. Finally, this review proposes some ITCD-related applications and a few exciting prospects and potential hot topics in future ITCD research.

Dinghao Yang, Bin Wang, Weijia Li et al.

Recent image matting studies are developing towards proposing trimap-free or interactive methods for complete complex image matting tasks. Although avoiding the extensive labors of trimap annotation, existing methods still suffer from two limitations: (1) For the single image with multiple objects, it is essential to provide extra interaction information to help determining the matting target; (2) For transparent objects, the accurate regression of alpha matte from RGB image is much more difficult compared with the opaque ones. In this work, we propose a Unified Interactive image Matting method, named UIM, which solves the limitations and achieves satisfying matting results for any scenario. Specifically, UIM leverages multiple types of user interaction to avoid the ambiguity of multiple matting targets, and we compare the pros and cons of different annotation types in detail. To unify the matting performance for transparent and opaque objects, we decouple image matting into two stages, i.e., foreground segmentation and transparency prediction. Moreover, we design a multi-scale attentive fusion module to alleviate the vagueness in the boundary region. Experimental results demonstrate that UIM achieves state-of-the-art performance on the Composition-1K test set and a synthetic unified dataset.

Yiqi Lin, Huabin Zheng, Huaping Zhong et al.

Recently, the self-supervised pre-training paradigm has shown great potential in leveraging large-scale unlabeled data to improve downstream task performance. However, increasing the scale of unlabeled pre-training data in real-world scenarios requires prohibitive computational costs and faces the challenge of uncurated samples. To address these issues, we build a task-specific self-supervised pre-training framework from a data selection perspective based on a simple hypothesis that pre-training on the unlabeled samples with similar distribution to the target task can bring substantial performance gains. Buttressed by the hypothesis, we propose the first yet novel framework for Scalable and Efficient visual Pre-Training (SEPT) by introducing a retrieval pipeline for data selection. SEPT first leverage a self-supervised pre-trained model to extract the features of the entire unlabeled dataset for retrieval pipeline initialization. Then, for a specific target task, SEPT retrievals the most similar samples from the unlabeled dataset based on feature similarity for each target instance for pre-training. Finally, SEPT pre-trains the target model with the selected unlabeled samples in a self-supervised manner for target data finetuning. By decoupling the scale of pre-training and available upstream data for a target task, SEPT achieves high scalability of the upstream dataset and high efficiency of pre-training, resulting in high model architecture flexibility. Results on various downstream tasks demonstrate that SEPT can achieve competitive or even better performance compared with ImageNet pre-training while reducing the size of training samples by one magnitude without resorting to any extra annotations.

Junyan Ye, Jun He, Weijia Li et al.

Ground-to-aerial image synthesis focuses on generating realistic aerial images from corresponding ground street view images while maintaining consistent content layout, simulating a top-down view. The significant viewpoint difference leads to domain gaps between views, and dense urban scenes limit the visible range of street views, making this cross-view generation task particularly challenging. In this paper, we introduce SkyDiffusion, a novel cross-view generation method for synthesizing aerial images from street view images, utilizing a diffusion model and the Bird's-Eye View (BEV) paradigm. The Curved-BEV method in SkyDiffusion converts street-view images into a BEV perspective, effectively bridging the domain gap, and employs a "multi-to-one" mapping strategy to address occlusion issues in dense urban scenes. Next, SkyDiffusion designed a BEV-guided diffusion model to generate content-consistent and realistic aerial images. Additionally, we introduce a novel dataset, Ground2Aerial-3, designed for diverse ground-to-aerial image synthesis applications, including disaster scene aerial synthesis, low-altitude UAV image synthesis, and historical high-resolution satellite image synthesis tasks. Experimental results demonstrate that SkyDiffusion outperforms state-of-the-art methods on cross-view datasets across natural (CVUSA), suburban (CVACT), urban (VIGOR-Chicago), and various application scenarios (G2A-3), achieving realistic and content-consistent aerial image generation. The code, datasets and more information of this work can be found at https://opendatalab.github.io/skydiffusion/ .

Zhiyuan Yan, Junyan Ye, Weijia Li et al.

The recent breakthroughs in OpenAI's GPT4o model have demonstrated surprisingly good capabilities in image generation and editing, resulting in significant excitement in the community. This technical report presents the first-look evaluation benchmark (named GPT-ImgEval), quantitatively and qualitatively diagnosing GPT-4o's performance across three critical dimensions: (1) generation quality, (2) editing proficiency, and (3) world knowledge-informed semantic synthesis. Across all three tasks, GPT-4o demonstrates strong performance, significantly surpassing existing methods in both image generation control and output quality, while also showcasing exceptional knowledge reasoning capabilities. Furthermore, based on the GPT-4o's generated data, we propose a classification-model-based approach to investigate the underlying architecture of GPT-4o, where our empirical results suggest the model consists of an auto-regressive (AR) combined with a diffusion-based head for image decoding, rather than the VAR-like architectures. We also provide a complete speculation on GPT-4o's overall architecture. In addition, we conduct a series of analyses to identify and visualize GPT-4o's specific limitations and the synthetic artifacts commonly observed in its image generation. We also present a comparative study of multi-round image editing between GPT-4o and Gemini 2.0 Flash, and discuss the safety implications of GPT-4o's outputs, particularly their detectability by existing image forensic models. We hope that our work can offer valuable insight and provide a reliable benchmark to guide future research, foster reproducibility, and accelerate innovation in the field of image generation and beyond. The codes and datasets used for evaluating GPT-4o can be found at https://github.com/PicoTrex/GPT-ImgEval.

Chao Pang, Xingxing Weng, Jiang Wu et al.

This paper develops a Versatile and Honest vision language Model (VHM) for remote sensing image analysis. VHM is built on a large-scale remote sensing image-text dataset with rich-content captions (VersaD), and an honest instruction dataset comprising both factual and deceptive questions (HnstD). Unlike prevailing remote sensing image-text datasets, in which image captions focus on a few prominent objects and their relationships, VersaD captions provide detailed information about image properties, object attributes, and the overall scene. This comprehensive captioning enables VHM to thoroughly understand remote sensing images and perform diverse remote sensing tasks. Moreover, different from existing remote sensing instruction datasets that only include factual questions, HnstD contains additional deceptive questions stemming from the non-existence of objects. This feature prevents VHM from producing affirmative answers to nonsense queries, thereby ensuring its honesty. In our experiments, VHM significantly outperforms various vision language models on common tasks of scene classification, visual question answering, and visual grounding. Additionally, VHM achieves competent performance on several unexplored tasks, such as building vectorizing, multi-label classification and honest question answering. We will release the code, data and model weights at https://github.com/opendatalab/VHM .

Zichen Wen, Yifeng Gao, Shaobo Wang et al.

Vision tokens in multimodal large language models often dominate huge computational overhead due to their excessive length compared to linguistic modality. Abundant recent methods aim to solve this problem with token pruning, which first defines an importance criterion for tokens and then prunes the unimportant vision tokens during inference. However, in this paper, we show that the importance is not an ideal indicator to decide whether a token should be pruned. Surprisingly, it usually results in inferior performance than random token pruning and leading to incompatibility to efficient attention computation operators.Instead, we propose DART (Duplication-Aware Reduction of Tokens), which prunes tokens based on its duplication with other tokens, leading to significant and training-free acceleration. Concretely, DART selects a small subset of pivot tokens and then retains the tokens with low duplication to the pivots, ensuring minimal information loss during token pruning. Experiments demonstrate that DART can prune 88.9% vision tokens while maintaining comparable performance, leading to a 1.99$\times$ and 2.99$\times$ speed-up in total time and prefilling stage, respectively, with good compatibility to efficient attention operators. Our codes are available at https://github.com/ZichenWen1/DART.

Runmin Dong, Shuai Yuan, Bin Luo et al.

Reference-based super-resolution (RefSR) has the potential to build bridges across spatial and temporal resolutions of remote sensing images. However, existing RefSR methods are limited by the faithfulness of content reconstruction and the effectiveness of texture transfer in large scaling factors. Conditional diffusion models have opened up new opportunities for generating realistic high-resolution images, but effectively utilizing reference images within these models remains an area for further exploration. Furthermore, content fidelity is difficult to guarantee in areas without relevant reference information. To solve these issues, we propose a change-aware diffusion model named Ref-Diff for RefSR, using the land cover change priors to guide the denoising process explicitly. Specifically, we inject the priors into the denoising model to improve the utilization of reference information in unchanged areas and regulate the reconstruction of semantically relevant content in changed areas. With this powerful guidance, we decouple the semantics-guided denoising and reference texture-guided denoising processes to improve the model performance. Extensive experiments demonstrate the superior effectiveness and robustness of the proposed method compared with state-of-the-art RefSR methods in both quantitative and qualitative evaluations. The code and data are available at https://github.com/dongrunmin/RefDiff.

Junyan Ye, Baichuan Zhou, Zilong Huang et al.

With the rapid development of AI-generated content, the future internet may be inundated with synthetic data, making the discrimination of authentic and credible multimodal data increasingly challenging. Synthetic data detection has thus garnered widespread attention, and the performance of large multimodal models (LMMs) in this task has attracted significant interest. LMMs can provide natural language explanations for their authenticity judgments, enhancing the explainability of synthetic content detection. Simultaneously, the task of distinguishing between real and synthetic data effectively tests the perception, knowledge, and reasoning capabilities of LMMs. In response, we introduce LOKI, a novel benchmark designed to evaluate the ability of LMMs to detect synthetic data across multiple modalities. LOKI encompasses video, image, 3D, text, and audio modalities, comprising 18K carefully curated questions across 26 subcategories with clear difficulty levels. The benchmark includes coarse-grained judgment and multiple-choice questions, as well as fine-grained anomaly selection and explanation tasks, allowing for a comprehensive analysis of LMMs. We evaluated 22 open-source LMMs and 6 closed-source models on LOKI, highlighting their potential as synthetic data detectors and also revealing some limitations in the development of LMM capabilities. More information about LOKI can be found at https://opendatalab.github.io/LOKI/

Siwei Wen, Junyan Ye, Peilin Feng et al.

With the rapid advancement of Artificial Intelligence Generated Content (AIGC) technologies, synthetic images have become increasingly prevalent in everyday life, posing new challenges for authenticity assessment and detection. Despite the effectiveness of existing methods in evaluating image authenticity and locating forgeries, these approaches often lack human interpretability and do not fully address the growing complexity of synthetic data. To tackle these challenges, we introduce FakeVLM, a specialized large multimodal model designed for both general synthetic image and DeepFake detection tasks. FakeVLM not only excels in distinguishing real from fake images but also provides clear, natural language explanations for image artifacts, enhancing interpretability. Additionally, we present FakeClue, a comprehensive dataset containing over 100,000 images across seven categories, annotated with fine-grained artifact clues in natural language. FakeVLM demonstrates performance comparable to expert models while eliminating the need for additional classifiers, making it a robust solution for synthetic data detection. Extensive evaluations across multiple datasets confirm the superiority of FakeVLM in both authenticity classification and artifact explanation tasks, setting a new benchmark for synthetic image detection. The code, model weights, and dataset can be found here: https://github.com/opendatalab/FakeVLM.

Junyan Ye, Qiyan Luo, Jinhua Yu et al.

This paper aims at achieving fine-grained building attribute segmentation in a cross-view scenario, i.e., using satellite and street-view image pairs. The main challenge lies in overcoming the significant perspective differences between street views and satellite views. In this work, we introduce SG-BEV, a novel approach for satellite-guided BEV fusion for cross-view semantic segmentation. To overcome the limitations of existing cross-view projection methods in capturing the complete building facade features, we innovatively incorporate Bird's Eye View (BEV) method to establish a spatially explicit mapping of street-view features. Moreover, we fully leverage the advantages of multiple perspectives by introducing a novel satellite-guided reprojection module, optimizing the uneven feature distribution issues associated with traditional BEV methods. Our method demonstrates significant improvements on four cross-view datasets collected from multiple cities, including New York, San Francisco, and Boston. On average across these datasets, our method achieves an increase in mIOU by 10.13% and 5.21% compared with the state-of-the-art satellite-based and cross-view methods. The code and datasets of this work will be released at https://github.com/yejy53/SG-BEV.

Dongzhi Jiang, Renrui Zhang, Haodong Li et al.

Recent unified multimodal large language models (MLLMs) have shown impressive capabilities, incorporating chain-of-thought (CoT) reasoning for enhanced text-to-image generation. However, existing approaches remain limited, either treating the model merely as a standalone generator or relying on abstract textual planning. To this end, we propose Draft-as-CoT (DraCo), a novel interleaved reasoning paradigm that fully leverages both textual and visual contents in CoT for better planning and verification. Our method first generates a low-resolution draft image as preview, providing more concrete and structural visual planning and guidance. Then, we employ the model's inherent understanding capability to verify potential semantic misalignments between the draft and input prompt, and performs refinement through selective corrections with super-resolution. In this way, our approach addresses two fundamental challenges: the coarse-grained nature of textual planning and the difficulty in generating rare attribute combinations. To support training, we curate DraCo-240K, aiming to enhance three atomic capabilities spanning general correction, instance manipulation, and layout reorganization. Supported by DraCo-CFG, a specialized classifier-free guidance (CFG) strategy for interleaved reasoning, DraCo achieves a tremendous increase on GenEval (+8%), Imagine-Bench (+0.91), and GenEval++ (+3%), significantly outperforming direct generation and other generation methods empowered by CoT.

Junyan Ye, Dongzhi Jiang, Zihao Wang et al.

Recently, GPT-4o has garnered significant attention for its strong performance in image generation, yet open-source models still lag behind. Several studies have explored distilling image data from GPT-4o to enhance open-source models, achieving notable progress. However, a key question remains: given that real-world image datasets already constitute a natural source of high-quality data, why should we use GPT-4o-generated synthetic data? In this work, we identify two key advantages of synthetic images. First, they can complement rare scenarios in real-world datasets, such as surreal fantasy or multi-reference image generation, which frequently occur in user queries. Second, they provide clean and controllable supervision. Real-world data often contains complex background noise and inherent misalignment between text descriptions and image content, whereas synthetic images offer pure backgrounds and long-tailed supervision signals, facilitating more accurate text-to-image alignment. Building on these insights, we introduce Echo-4o-Image, a 180K-scale synthetic dataset generated by GPT-4o, harnessing the power of synthetic image data to address blind spots in real-world coverage. Using this dataset, we fine-tune the unified multimodal generation baseline Bagel to obtain Echo-4o. In addition, we propose two new evaluation benchmarks for a more accurate and challenging assessment of image generation capabilities: GenEval++, which increases instruction complexity to mitigate score saturation, and Imagine-Bench, which focuses on evaluating both the understanding and generation of imaginative content. Echo-4o demonstrates strong performance across standard benchmarks. Moreover, applying Echo-4o-Image to other foundation models (e.g., OmniGen2, BLIP3-o) yields consistent performance gains across multiple metrics, highlighting the datasets strong transferability.

Jun He, Junyan Ye, Zilong Huang et al.

While text-to-image generation has achieved unprecedented fidelity, the vast majority of existing models function fundamentally as static text-to-pixel decoders. Consequently, they often fail to grasp implicit user intentions. Although emerging unified understanding-generation models have improved intent comprehension, they still struggle to accomplish tasks involving complex knowledge reasoning within a single model. Moreover, constrained by static internal priors, these models remain unable to adapt to the evolving dynamics of the real world. To bridge these gaps, we introduce Mind-Brush, a unified agentic framework that transforms generation into a dynamic, knowledge-driven workflow. Simulating a human-like 'think-research-create' paradigm, Mind-Brush actively retrieves multimodal evidence to ground out-of-distribution concepts and employs reasoning tools to resolve implicit visual constraints. To rigorously evaluate these capabilities, we propose Mind-Bench, a comprehensive benchmark comprising 500 distinct samples spanning real-time news, emerging concepts, and domains such as mathematical and Geo-Reasoning. Extensive experiments demonstrate that Mind-Brush significantly enhances the capabilities of unified models, realizing a zero-to-one capability leap for the Qwen-Image baseline on Mind-Bench, while achieving superior results on established benchmarks like WISE and RISE.

Weijia Li, Jinhua Yu, Dairong Chen et al.

In this work, we propose a geometry-aware semi-supervised framework for fine-grained building function recognition, utilizing geometric relationships among multi-source data to enhance pseudo-label accuracy in semi-supervised learning, broadening its applicability to various building function categorization systems. Firstly, we design an online semi-supervised pre-training stage, which facilitates the precise acquisition of building facade location information in street-view images. In the second stage, we propose a geometry-aware coarse annotation generation module. This module effectively combines GIS data and street-view data based on the geometric relationships, improving the accuracy of pseudo annotations. In the third stage, we combine the newly generated coarse annotations with the existing labeled dataset to achieve fine-grained functional recognition of buildings across multiple cities at a large scale. Extensive experiments demonstrate that our proposed framework exhibits superior performance in fine-grained functional recognition of buildings. Within the same categorization system, it achieves improvements of 7.6\% and 4.8\% compared to fully-supervised methods and state-of-the-art semi-supervised methods, respectively. Additionally, our method also performs well in cross-city scenarios, i.e., extending the model trained on OmniCity (New York) to new cities (i.e., Los Angeles and Boston) with different building function categorization systems. This study offers a new solution for large-scale multi-city applications with minimal annotation requirements, facilitating more efficient data updates and resource allocation in urban management.

Yuncheng Guo, Junyan Ye, Chenjue Zhang et al.

A truly universal AI-Generated Image (AIGI) detector must simultaneously generalize across diverse generative models and varied semantic content. Current state-of-the-art methods learn a single, entangled forgery representation--conflating content-dependent flaws with content-agnostic artifacts--and are further constrained by outdated benchmarks. To overcome these limitations, we propose OmniAID, a novel framework centered on a decoupled Mixture-of-Experts (MoE) architecture. The core of our method is a hybrid expert system engineered to decouple: (1) semantic flaws across distinct content domains, and (2) these content-dependent flaws from content-agnostic universal artifacts. This system employs a set of Routable Specialized Semantic Experts, each for a distinct domain (e.g., human, animal), complemented by a Fixed Universal Artifact Expert. This architecture is trained using a bespoke two-stage strategy: we first train the experts independently with domain-specific hard-sampling to ensure specialization, and subsequently train a lightweight gating network for effective input routing. By explicitly decoupling "what is generated" (content-specific flaws) from "how it is generated" (universal artifacts), OmniAID achieves robust generalization. To address outdated benchmarks and validate real-world applicability, we introduce Mirage, a new large-scale, contemporary dataset. Extensive experiments, using both traditional benchmarks and our Mirage dataset, demonstrate our model surpasses existing monolithic detectors, establishing a new, robust standard for AIGI authentication against modern, in-the-wild threats.

Weijia Li, Haote Yang, Zhenghao Hu et al.

3D building reconstruction from monocular remote sensing images is an important and challenging research problem that has received increasing attention in recent years, owing to its low cost of data acquisition and availability for large-scale applications. However, existing methods rely on expensive 3D-annotated samples for fully-supervised training, restricting their application to large-scale cross-city scenarios. In this work, we propose MLS-BRN, a multi-level supervised building reconstruction network that can flexibly utilize training samples with different annotation levels to achieve better reconstruction results in an end-to-end manner. To alleviate the demand on full 3D supervision, we design two new modules, Pseudo Building Bbox Calculator and Roof-Offset guided Footprint Extractor, as well as new tasks and training strategies for different types of samples. Experimental results on several public and new datasets demonstrate that our proposed MLS-BRN achieves competitive performance using much fewer 3D-annotated samples, and significantly improves the footprint extraction and 3D reconstruction performance compared with current state-of-the-art. The code and datasets of this work will be released at https://github.com/opendatalab/MLS-BRN.git.

Zichen Wen, Jiashu Qu, Dongrui Liu et al.

Diffusion-based large language models (dLLMs) have recently emerged as a powerful alternative to autoregressive LLMs, offering faster inference and greater interactivity via parallel decoding and bidirectional modeling. However, despite strong performance in code generation and text infilling, we identify a fundamental safety concern: existing alignment mechanisms fail to safeguard dLLMs against context-aware, masked-input adversarial prompts, exposing novel vulnerabilities. To this end, we present DIJA, the first systematic study and jailbreak attack framework that exploits unique safety weaknesses of dLLMs. Specifically, our proposed DIJA constructs adversarial interleaved mask-text prompts that exploit the text generation mechanisms of dLLMs, i.e., bidirectional modeling and parallel decoding. Bidirectional modeling drives the model to produce contextually consistent outputs for masked spans, even when harmful, while parallel decoding limits model dynamic filtering and rejection sampling of unsafe content. This causes standard alignment mechanisms to fail, enabling harmful completions in alignment-tuned dLLMs, even when harmful behaviors or unsafe instructions are directly exposed in the prompt. Through comprehensive experiments, we demonstrate that DIJA significantly outperforms existing jailbreak methods, exposing a previously overlooked threat surface in dLLM architectures. Notably, our method achieves up to 100% keyword-based ASR on Dream-Instruct, surpassing the strongest prior baseline, ReNeLLM, by up to 78.5% in evaluator-based ASR on JailbreakBench and by 37.7 points in StrongREJECT score, while requiring no rewriting or hiding of harmful content in the jailbreak prompt. Our findings underscore the urgent need for rethinking safety alignment in this emerging class of language models. Code is available at https://github.com/ZichenWen1/DIJA.

Junyuan Gao, Jiahe Song, Jiang Wu et al.

Existing multilingual benchmarks for Large Vision Language Models (LVLMs) suffer from limitations including language-specific content biases, disjointed multimodal input formats, and a lack of safety evaluation. To address these gaps, we propose PM4Bench, the first Parallel Multilingual Multi-Modal Multi-task Benchmark for LVLMs. PM4Bench features a parallel corpus design across 10 languages, enabling fair and accurate cross-lingual comparisons. It includes the vision setting where text and queries are embedded in images, requiring LVLMs to simultaneously "see", "read", and "think", aligning with real-world applications. Additionally, PM\textsuperscript{4}Bench incorporates safety evaluations, addressing critical oversight in existing multilingual benchmarks. Using PM4Bench, we evaluate 11 mainstream LVLMs, revealing significant cross-linguistic performance disparities, particularly in vision settings, and identifying OCR capability as a key determinant of these imbalances. We will release PM4Bench at https://github.com/opendatalab/PM4Bench .

Zilong Huang, Jun He, Junyan Ye et al.

The reconstruction of immersive and realistic 3D scenes holds significant practical importance in various fields of computer vision and computer graphics. Typically, immersive and realistic scenes should be free from obstructions by dynamic objects, maintain global texture consistency, and allow for unrestricted exploration. The current mainstream methods for image-driven scene construction involves iteratively refining the initial image using a moving virtual camera to generate the scene. However, previous methods struggle with visual discontinuities due to global texture inconsistencies under varying camera poses, and they frequently exhibit scene voids caused by foreground-background occlusions. To this end, we propose a novel layered 3D scene reconstruction framework from panoramic image, named Scene4U. Specifically, Scene4U integrates an open-vocabulary segmentation model with a large language model to decompose a real panorama into multiple layers. Then, we employs a layered repair module based on diffusion model to restore occluded regions using visual cues and depth information, generating a hierarchical representation of the scene. The multi-layer panorama is then initialized as a 3D Gaussian Splatting representation, followed by layered optimization, which ultimately produces an immersive 3D scene with semantic and structural consistency that supports free exploration. Scene4U outperforms state-of-the-art method, improving by 24.24% in LPIPS and 24.40% in BRISQUE, while also achieving the fastest training speed. Additionally, to demonstrate the robustness of Scene4U and allow users to experience immersive scenes from various landmarks, we build WorldVista3D dataset for 3D scene reconstruction, which contains panoramic images of globally renowned sites. The implementation code and dataset will be released at https://github.com/LongHZ140516/Scene4U .

Junlong Ke, Zichen Wen, Weijia Li et al.

On-policy self-distillation trains a reasoning model on its own rollouts while a teacher, often the same model conditioned on privileged context, provides dense token-level supervision. Existing objectives typically weight the teacher's token-level signal uniformly across a chain-of-thought sequence, despite substantial variation in the entropy of the teacher's predictive distribution. We propose EGRSD (Entropy-Guided Reinforced Self-Distillation), which unifies token-level updates through three signals: a reward-grounded direction, a teacher-student likelihood-ratio magnitude, and the proposed teacher-entropy confidence gate that down-weights high-entropy token positions while maintaining a nonzero lower bound on every token weight. We further introduce CL-EGRSD, a causal-lookahead variant that distinguishes sustained high-entropy spans from transient high-entropy positions whose following context rapidly becomes low entropy. Experiments with Qwen3-4B and Qwen3-8B in thinking mode show that EGRSD and CL-EGRSD advance the accuracy-length frontier among the compared trainable methods.

Junyan Ye, Dongzhi Jiang, Jun He et al.

Recently, Multimodal Large Language Models (MLLMs) have made rapid progress, particularly in enhancing their reasoning capabilities. However, existing reasoning benchmarks still primarily assess language-based reasoning, often treating visual input as replaceable context. To address this gap, we introduce BLINK-Twice, a vision-centric reasoning benchmark grounded in challenging perceptual tasks. Instead of relying on external knowledge, our tasks require models to reason from visual content alone, shifting the focus from language-based to image-grounded reasoning. Compared to prior perception benchmarks, it moves beyond shallow perception ("see") and requires fine-grained observation and analytical reasoning ("observe"). BLINK-Twice integrates three core components: seven types of visual challenges for testing visual reasoning, natural adversarial image pairs that enforce reliance on visual content, and annotated reasoning chains for fine-grained evaluation of the reasoning process rather than final answers alone. We evaluate 20 leading MLLMs, including 12 foundation models and 8 reasoning-enhanced models. BLINK-Twice poses a significant challenge to current models. While existing reasoning strategies in the language space-such as chain-of-thought or self-criticism can improve performance, they often result in unstable and redundant reasoning. We observe that repeated image observation improves performance across models, and active visual interaction, as demonstrated by models like o3, highlights the need for a new paradigm for vision reasoning. The dataset is publicly available at https://github.com/PicoTrex/BLINK-Twice

Anqi Li, Wenwei Jin, Jintao Tong et al.

Social platforms have revolutionized information sharing, but also accelerated the dissemination of harmful and policy-violating content. To ensure safety and compliance at scale, moderation systems must go beyond efficiency and offer accuracy and interpretability. However, current approaches largely rely on noisy, label-driven learning, lacking alignment with moderation rules and producing opaque decisions that hinder human review. Therefore, we propose Hierarchical Guard (Hi-Guard), a multimodal moderation framework that introduces a new policy-aligned decision paradigm. The term "Hierarchical" reflects two key aspects of our system design: (1) a hierarchical moderation pipeline, where a lightweight binary model first filters safe content and a stronger model handles fine-grained risk classification; and (2) a hierarchical taxonomy in the second stage, where the model performs path-based classification over a hierarchical taxonomy ranging from coarse to fine-grained levels. To ensure alignment with evolving moderation policies, Hi-Guard directly incorporates rule definitions into the model prompt. To further enhance structured prediction and reasoning, we introduce a multi-level soft-margin reward and optimize with Group Relative Policy Optimization (GRPO), penalizing semantically adjacent misclassifications and improving explanation quality. Extensive experiments and real-world deployment demonstrate that Hi-Guard achieves superior classification accuracy, generalization, and interpretability, paving the way toward scalable, transparent, and trustworthy content safety systems. Code is available at: https://github.com/lianqi1008/Hi-Guard.

Shilei Cao, Juepeng Zheng, Yan Liu et al.

Real-world application models are commonly deployed in dynamic environments, where the target domain distribution undergoes temporal changes. Continual Test-Time Adaptation (CTTA) has recently emerged as a promising technique to gradually adapt a source-trained model to continually changing target domains. Despite recent advancements in addressing CTTA, two critical issues remain: 1) Fixed thresholds for pseudo-labeling in existing methodologies lead to low-quality pseudo-labels, as model confidence varies across categories and domains; 2) Stochastic parameter restoration methods for mitigating catastrophic forgetting fail to preserve critical information effectively, due to their intrinsic randomness. To tackle these challenges for detection models in CTTA scenarios, we present AMROD, featuring three core components. Firstly, the object-level contrastive learning module extracts object-level features for contrastive learning to refine the feature representation in the target domain. Secondly, the adaptive monitoring module dynamically skips unnecessary adaptation and updates the category-specific threshold based on predicted confidence scores to enable efficiency and improve the quality of pseudo-labels. Lastly, the adaptive randomized restoration mechanism selectively reset inactive parameters with higher possibilities, ensuring the retention of essential knowledge. We demonstrate the effectiveness of AMROD on four CTTA object detection tasks, where AMROD outperforms existing methods, especially achieving a 3.2 mAP improvement and a 20\% increase in efficiency on the Cityscapes-to-Cityscapes-C CTTA task. The code of this work is available at https://github.com/ShileiCao/AMROD.

Qingmei Li, Yang Zhang, Zurong Mai et al.

Large Multimodal Models (LMMs) has demonstrated capabilities across various domains, but comprehensive benchmarks for agricultural remote sensing (RS) remain scarce. Existing benchmarks designed for agricultural RS scenarios exhibit notable limitations, primarily in terms of insufficient scene diversity in the dataset and oversimplified task design. To bridge this gap, we introduce AgroMind, a comprehensive agricultural remote sensing benchmark covering four task dimensions: spatial perception, object understanding, scene understanding, and scene reasoning, with a total of 13 task types, ranging from crop identification and health monitoring to environmental analysis. We curate a high-quality evaluation set by integrating eight public datasets and one private farmland plot dataset, containing 27,247 QA pairs and 19,615 images. The pipeline begins with multi-source data pre-processing, including collection, format standardization, and annotation refinement. We then generate a diverse set of agriculturally relevant questions through the systematic definition of tasks. Finally, we employ LMMs for inference, generating responses, and performing detailed examinations. We evaluated 20 open-source LMMs and 4 closed-source models on AgroMind. Experiments reveal significant performance gaps, particularly in spatial reasoning and fine-grained recognition, it is notable that human performance lags behind several leading LMMs. By establishing a standardized evaluation framework for agricultural RS, AgroMind reveals the limitations of LMMs in domain knowledge and highlights critical challenges for future work. Data and code can be accessed at https://rssysu.github.io/AgroMind/.

Jinxiao Zhang, Runmin Dong, Xiyong Wu et al.

Earth observation is becoming one of the largest data-producing activities in science, yet current pipelines still treat compression as a storage and transmission tool rather than a new way to use data. We present a generative compression framework that learns from historical Earth observation archives and enables on-demand 100x to 10,000x data reduction across downstream tasks. Unlike general visual data, Earth observation repeatedly measures the same evolving planet, making historical-prior learning feasible for extreme compression. To realize this paradigm, we train large generative compression models at exascale on the LineShine Armv9 CPU supercomputer, with co-optimization across model design, kernels, memory hierarchy, runtime, and parallelism. Our implementation sustains 1.54 EFLOP/s and peaks at 2.16 EFLOP/s in end-to-end training. This work shows that historical-prior generative compression can turn Earth observation data into an active, task-adaptive foundation for acquisition, delivery, storage, and scientific use.

Zhenyu Wang, Weichen Cheng, Weijia Li et al.

Multimodal sarcasm detection (MSD) aims to identify sarcastic intent from semantic incongruity between text and image. Although recent methods have improved MSD through cross-modal interaction and incongruity reasoning, they often assume that all modalities are equally reliable. In real-world social media, however, textual content may be ambiguous and visual content may be weakly relevant or even irrelevant, causing deterministic fusion to introduce noisy evidence and weaken robust reasoning. To address this issue, we propose Uncertainty-aware Robust Multimodal Fusion (URMF), a unified framework that explicitly models modality reliability during interaction and fusion. URMF first employs multi-head cross-attention to inject visual evidence into textual representations, followed by multi-head self-attention in the fused semantic space to enhance incongruity-aware reasoning. It then performs unified unimodal aleatoric uncertainty modeling over text, image, and interaction-aware latent representations by parameterizing each modality as a learnable Gaussian posterior. The estimated uncertainty is further used to dynamically regulate modality contributions during fusion, suppressing unreliable modalities and yielding a more robust joint representation. In addition, we design a joint training objective integrating task supervision, modality prior regularization, cross-modal distribution alignment, and uncertainty-driven self-sampling contrastive learning. Experiments on public MSD benchmarks show that URMF consistently outperforms strong unimodal, multimodal, and MLLM-based baselines, demonstrating the effectiveness of uncertainty-aware fusion for improving both accuracy and robustness.

Zichen Song, Weijia Li

Public policy decisions are typically justified using a narrow set of headline indicators, leaving many downstream social impacts unstructured and difficult to compare across policies. We propose PPCR-IM, a system for multi-layer DAG-based consequence reasoning and social indicator mapping that addresses this gap. Given a policy description and its context, PPCR-IM uses an LLM-driven, layer-wise generator to construct a directed acyclic graph of intermediate consequences, allowing child nodes to have multiple parents to capture joint influences. A mapping module then aligns these nodes to a fixed indicator set and assigns one of three qualitative impact directions: increase, decrease, or ambiguous change. For each policy episode, the system outputs a structured record containing the DAG, indicator mappings, and three evaluation measures: an expected-indicator coverage score, a discovery rate for overlooked but relevant indicators, and a relative focus ratio comparing the systems coverage to that of the government. PPCR-IM is available both as an online demo and as a configurable XLSX-to-JSON batch pipeline.

Zichen Wen, Yifeng Gao, Weijia Li et al.

Multimodal large language models (MLLMs) have shown remarkable performance for cross-modal understanding and generation, yet still suffer from severe inference costs. Recently, abundant works have been proposed to solve this problem with token pruning, which identifies the redundant tokens in MLLMs and then prunes them to reduce the computation and KV storage costs, leading to significant acceleration without training. While these methods claim efficiency gains, critical questions about their fundamental design and evaluation remain unanswered: Why do many existing approaches underperform even compared to naive random token selection? Are attention-based scoring sufficient for reliably identifying redundant tokens? Is language information really helpful during token pruning? What makes a good trade-off between token importance and duplication? Are current evaluation protocols comprehensive and unbiased? The ignorance of previous research on these problems hinders the long-term development of token pruning. In this paper, we answer these questions one by one, providing insights into the design of future token pruning methods.

Hengrui Kang, Siwei Wen, Zichen Wen et al.

The rapid advancements in generative technology have emerged as a double-edged sword. While offering powerful tools that enhance convenience, they also pose significant social concerns. As defenders, current synthetic image detection methods often lack artifact-level textual interpretability and are overly focused on image manipulation detection, and current datasets usually suffer from outdated generators and a lack of fine-grained annotations. In this paper, we introduce SynthScars, a high-quality and diverse dataset consisting of 12,236 fully synthetic images with human-expert annotations. It features 4 distinct image content types, 3 categories of artifacts, and fine-grained annotations covering pixel-level segmentation, detailed textual explanations, and artifact category labels. Furthermore, we propose LEGION (LEarning to Ground and explain for Synthetic Image detectiON), a multimodal large language model (MLLM)-based image forgery analysis framework that integrates artifact detection, segmentation, and explanation. Building upon this capability, we further explore LEGION as a controller, integrating it into image refinement pipelines to guide the generation of higher-quality and more realistic images. Extensive experiments show that LEGION outperforms existing methods across multiple benchmarks, particularly surpassing the second-best traditional expert on SynthScars by 3.31% in mIoU and 7.75% in F1 score. Moreover, the refined images generated under its guidance exhibit stronger alignment with human preferences. The code, model, and dataset will be released.

Xuyang Liu, Zichen Wen, Shaobo Wang et al.

The advancement of large language models (LLMs) and multi-modal LLMs (MLLMs) has historically relied on scaling model parameters. However, as hardware limits constrain further model growth, the primary computational bottleneck has shifted to the quadratic cost of self-attention over increasingly long sequences by ultra-long text contexts, high-resolution images, and extended videos. In this position paper, \textbf{we argue that the focus of research for efficient artificial intelligence (AI) is shifting from model-centric compression to data-centric compression}. We position data-centric compression as the emerging paradigm, which improves AI efficiency by directly compressing the volume of data processed during model training or inference. To formalize this shift, we establish a unified framework for existing efficiency strategies and demonstrate why it constitutes a crucial paradigm change for long-context AI. We then systematically review the landscape of data-centric compression methods, analyzing their benefits across diverse scenarios. Finally, we outline key challenges and promising future research directions. Our work aims to provide a novel perspective on AI efficiency, synthesize existing efforts, and catalyze innovation to address the challenges posed by ever-increasing context lengths.

Yiqi Lin, Conghui He, Alex Jinpeng Wang et al.

Despite CLIP being the foundation model in numerous vision-language applications, the CLIP suffers from a severe text spotting bias. Such bias causes CLIP models to `Parrot' the visual text embedded within images while disregarding the authentic visual semantics. We uncover that in the most popular image-text dataset LAION-2B, the captions also densely parrot (spell) the text embedded in images. Our analysis shows that around 50% of images are embedded with visual text content, and around 30% of captions words are in these embedded visual content. Based on such observation, we thoroughly inspect the different released versions of CLIP models and verify that the visual text is the dominant factor in measuring the LAION-style image-text similarity for these models. To examine whether these parrot captions shape the text spotting bias, we train a series of CLIP models with LAION subsets curated by different parrot-caption-oriented criteria. We show that training with parrot captions easily shapes such bias but harms the expected visual-language representation learning in CLIP models. This suggests that it is urgent to revisit either the design of CLIP-like models or the existing image-text dataset curation pipeline built on CLIP score filtering.

Bin Wang, Tianyao He, Linke Ouyang et al.

Current document parsing methods compete primarily on model architecture innovation, while systematic engineering of training data remains underexplored. Yet SOTA models of different architectures and parameter scales exhibit highly consistent failure patterns on the same set of hard samples, suggesting that the performance bottleneck stems from shared deficiencies in training data rather than architecture itself. Building on this finding, we present \minerupro, which advances the state of the art solely through data engineering and training strategy optimization while keeping the 1.2B-parameter architecture of \mineru completely fixed. At its core is a Data Engine co-designed around coverage, informativeness, and annotation accuracy: Diversity-and-Difficulty-Aware Sampling expands training data from under 10M to 65.5M samples while correcting distribution shift; Cross-Model Consistency Verification leverages output agreement among heterogeneous models to assess sample difficulty and generate reliable annotations; the Judge-and-Refine pipeline improves annotation quality for hard samples through render-then-verify iterative correction. A three-stage progressive training strategy -- large-scale pre-training, hard sample fine-tuning, and GRPO alignment -- sequentially exploits these data at different quality tiers. On the evaluation front, we fix element-matching biases in OmniDocBench~v1.5 and introduce a Hard subset, establishing the more discriminative OmniDocBench~v1.6 protocol. Without any architectural modification, \minerupro achieves 95.69 on OmniDocBench~v1.6, improving over the same-architecture baseline by 2.71 points and surpassing all existing methods including models with over 200$\times$ more parameters.

Junyan Ye, Honglin Lin, Leyan Ou et al.

Cross-view geo-localization identifies the locations of street-view images by matching them with geo-tagged satellite images or OSM. However, most existing studies focus on image-to-image retrieval, with fewer addressing text-guided retrieval, a task vital for applications like pedestrian navigation and emergency response. In this work, we introduce a novel task for cross-view geo-localization with natural language descriptions, which aims to retrieve corresponding satellite images or OSM database based on scene text descriptions. To support this task, we construct the CVG-Text dataset by collecting cross-view data from multiple cities and employing a scene text generation approach that leverages the annotation capabilities of Large Multimodal Models to produce high-quality scene text descriptions with localization details. Additionally, we propose a novel text-based retrieval localization method, CrossText2Loc, which improves recall by 10% and demonstrates excellent long-text retrieval capabilities. In terms of explainability, it not only provides similarity scores but also offers retrieval reasons. More information can be found at https://yejy53.github.io/CVG-Text/ .

Fengxiang Wang, Mingshuo Chen, Xuming He et al.

Existing benchmarks for multimodal learning in Earth science offer limited, siloed coverage of Earth's spheres and their cross-sphere interactions, typically restricting evaluation to the human-activity sphere of atmosphere and to at most 16 tasks. These limitations: \textit{narrow-source heterogeneity (single/few data sources), constrained scientific granularity, and limited-sphere extensibility}. Therefore, we introduce \textbf{OmniEarth-Bench}, the first multimodal benchmark that systematically spans all six spheres: atmosphere, lithosphere, oceanosphere, cryosphere, biosphere, and human-activity sphere, and cross-spheres. Built with a scalable, modular-topology data inference framework and native multi-observation sources and expert-in-the-loop curation, OmniEarth-Bench produces 29,855 standardized, expert-curated annotations. All annotations are organized into a four-level hierarchy (Sphere, Scenario, Ability, Task), encompassing 109 expert-curated evaluation tasks. Experiments on 9 state-of-the-art MLLMs reveal that even the most advanced models struggle with our benchmarks, where none of them reach 35\% accuracy, revealing systematic gaps in Earth-system cognitive ability. The dataset and evaluation code were released at OmniEarth-Bench (https://anonymous.4open.science/r/OmniEarth-Bench-B1BD).

Minhao Xiong, Zichen Wen, Zhuangcheng Gu et al.

Vision-Language Models (VLMs) have emerged as a promising paradigm in autonomous driving (AD), offering a unified framework for perception, reasoning, and decision-making by jointly modeling visual inputs and natural language instructions. However, their deployment is hindered by the significant computational overhead incurred when processing high-resolution, multi-view images, a standard setup in AD systems with six or more synchronized cameras. This overhead stems from the large number of visual tokens generated during encoding, increasing inference latency and memory consumption due to the quadratic complexity of self-attention. To address these challenges, we propose Prune2Drive, a plug-and-play visual token pruning framework for multi-view VLMs in autonomous driving. Prune2Drive introduces two core innovations: (i) a diversity-aware token selection mechanism inspired by farthest point sampling, which prioritizes semantic and spatial coverage across views rather than relying solely on attention scores, and (ii) a view-adaptive pruning controller that learns optimal pruning ratios for each camera view based on their importance to downstream driving tasks. Unlike prior methods, Prune2Drive does not require model retraining or access to attention maps, making it compatible with modern efficient attention implementations. Extensive experiments on two large-scale multi-view driving benchmarks, DriveLM and DriveLMM-o1, show that Prune2Drive achieves significant speedups and memory savings while maintaining or improving task performance. When retaining only 10% of the visual tokens, our method achieves a 6.40$\times$ speedup in the prefilling phase and consumes 13.4% of the original FLOPs, with only a 3% performance drop on the DriveLM benchmark.