Linbin Huang

Linbin Huang, Jeremy Coulson, John Lygeros et al.

We apply a novel data-enabled predictive control (DeePC) algorithm in grid-connected power converters to perform safe and optimal control. Rather than a model, the DeePC algorithm solely needs input/output data measured from the unknown system to predict future trajectories. We show that the DeePC can eliminate undesired oscillations in a grid-connected power converter and stabilize an unstable system. However, the DeePC algorithm may suffer from poor scalability when applied in high-order systems. To this end, we present a finite-horizon output-based model predictive control (MPC) for grid-connected power converters, which uses an N-step auto-regressive-moving-average (ARMA) model for system representation. The ARMA model is identified via an N-step prediction error method (PEM) in a recursive way. We investigate the connection between the DeePC and the concatenated PEM-MPC method, and then analytically and numerically compare their closed-loop performance. Moreover, the PEM-MPC is applied in a voltage source converter based HVDC station which is connected to a two-area power system so as to eliminate low-frequency oscillations. All of our results are illustrated with high-fidelity, nonlinear, and noisy simulations.

Kehao Zhuang, Huanhai Xin, Verena Häberle et al.

Grid-forming (GFM) technology is widely regarded as a promising solution for future power systems dominated by power electronics. However, a universally accepted definition of GFM behavior and precise method for its quantification remain elusive. Moreover, the impact of GFM converter on system stability is not precisely quantified, creating a significant disconnect between device and system levels. To address these gaps from a small-signal perspective, at the device level, the paper introduces a novel metric, the Forming Index (FI) to quantify a converter's response to grid voltage fluctuations. Rather than enumerating various control architectures, the FI provides a metric for the converter's GFM ability by quantifying its sensitivity to grid variations. At the system level, a new quantitative measure of system strength that captures the multi-bus voltage stiffness is proposed, which quantifies the voltage and phase angle responses of multiple buses to current or power disturbances. The paper further extends and defines this concept to grid strength and bus strength to identify weak areas within the system. Finally, the device and system levels are bridged by formally proving that GFM converters enhance system strength. The proposed framework provides a unified benchmark for GFM converter design, optimal placement, and system stability assessment.

Kehao Zhuang, Huanhai Xin, Verena Häberle et al.

Grid-forming (GFM) technology is widely regarded as a promising solution for future power systems dominated by power electronics. However, a precise method for quantifying GFM converter behavior and a universally accepted GFM definition remain elusive. Moreover, the impact of GFM on system stability is not precisely quantified, creating a significant disconnect between device and system levels. To address these gaps from a small-signal perspective, at the device level, we introduce a novel metric, the Forming Index (FI) to quantify a converter's response to grid voltage fluctuations. Rather than enumerating various control architectures, the FI provides a metric for the converter's GFM ability by quantifying its sensitivity to grid variations. At the system level, we propose a new quantitative measure of system strength that captures the multi-bus voltage stiffness, which quantifies the voltage and phase angle responses of multiple buses to current or power disturbances. We further extend and define this concept to grid strength and bus strength to identify weak areas within the system. Finally, we bridge the device and system levels by formally proving that GFM converters enhance system strength. Our proposed framework provides a unified benchmark for GFM converter design, optimal placement, and system stability assessment.

Linbin Huang, Huanhai Xin, Wei Dong et al.

Small-signal instability of grid-connected power converters may arise when the converters use a phase-locked loop (PLL) to synchronize with a weak grid. Commonly, this stability problem (referred as PLL-synchronization stability in this paper) was studied by employing a single-converter system connected to an infinite bus, which however, omits the impacts of power grid structure and the interactions among multiple converters. Motivated by this, we investigate how the grid structure affects PLL-synchronization stability of multi-converter systems. By using Kron reduction to eliminate the interior nodes, an equivalent reduced network is obtained which contains only the converter nodes. We explicitly show how the Kron-reduced multi-converter system can be decoupled into its modes. This modal representation allows us to demonstrate that the smallest eigenvalue of the grounded Laplacian matrix of the Kron-reduced network dominates the stability margin. We also carry out a sensitivity analysis of this smallest eigenvalue to explore how a perturbation in the original network affects the stability margin. On this basis, we provide guidelines on how to improve the PLL-synchronization stability of multi-converter systems by PLL-retuning, proper placement of converters or enhancing some weak connection in the network. Finally, we validate our findings with simulation results based on a 39-bus test system.

Ruohan Leng, Linbin Huang, Huanhai Xin et al.

Grid-connected power converters are ubiquitous in modern power systems, acting as grid interfaces of renewable energy sources, energy storage systems, electric vehicles, high-voltage DC systems, etc. Conventionally, power converters use multiple PID regulators to achieve different control objectives such as grid synchronization and voltage/power regulation, where the PID parameters are usually tuned based on a presumed (and often overly-simplified) power grid model. However, this may lead to inferior performance or even instabilities in practice, as the real power grid is highly complex, variable, and generally unknown. To tackle this problem, we employ a data-enabled predictive control (DeePC) to perform data-driven, optimal, robust, and adaptive control for power converters. We call the converters that are operated in this way DeePConverters. A DeePConverter can implicitly perceive the characteristics of the power grid from measured data and adjust its control strategy to achieve optimal, robust, and adaptive performance. We present the modular configurations, generalized structure, control behavior specification, inherent robustness, detailed implementation, computational aspects, and online adaptation of DeePConverters. High-fidelity simulations and hardware-in-the-loop (HIL) tests are provided to validate the effectiveness of DeePConverters.

Wenqi Cui, Linbin Huang, Weiwei Yang et al.

A key barrier to using reinforcement learning (RL) in many real-world applications is the requirement of a large number of system interactions to learn a good control policy. Off-policy and Offline RL methods have been proposed to reduce the number of interactions with the physical environment by learning control policies from historical data. However, their performances suffer from the lack of exploration and the distributional shifts in trajectories once controllers are updated. Moreover, most RL methods require that all states are directly observed, which is difficult to be attained in many settings. To overcome these challenges, we propose a trajectory generation algorithm, which adaptively generates new trajectories as if the system is being operated and explored under the updated control policies. Motivated by the fundamental lemma for linear systems, assuming sufficient excitation, we generate trajectories from linear combinations of historical trajectories. For linear feedback control, we prove that the algorithm generates trajectories with the exact distribution as if they are sampled from the real system using the updated control policy. In particular, the algorithm extends to systems where the states are not directly observed. Experiments show that the proposed method significantly reduces the number of sampled data needed for RL algorithms.

Fuyilong Ma, Lidong Zhang, Wangqianyun Tang et al.

The increasing penetration of converter-interfaced generators (CIGs) intensifies concerns over small-signal voltage and synchronization stability. While existing theories treat these two stability issues distinctly, practical wisdom in contrast employs a unified and static metric, short-circuit ratio (SCR), to assess both in weak grids. This paper aims to bridge this theory-practice gap by introducing the insight of non-minimum phase (NMP) zeros. First, we demonstrate that the two stability issues in weak grids originate from NMP zeros in the grid Jacobian transfer matrix: a zero at the origin corresponds to voltage instability, while low-frequency zeros impose fundamental constraints on synchronization dynamics. The traditional SCR is proven to be a special case of our proposed novel stability metric, NMP-zero (NMP-Z) factor, evaluated at the rated operating point. This establishes the theoretical foundation for the empirical success of SCR. Building on this insight, we then develop a unified stability assessment method for multi-converter systems. The method retains the simplicity of SCR, requiring only the NMP-Z factor together with individual CIG dynamic models and enabling stability margin assessment under various operating points. Our work provides a simple yet theoretically rigorous framework for stability analysis in CIG-integrated weak grids, with all theoretical findings and the proposed method validated through detailed time-domain simulations.

Verena Häberle, Kehao Zhuang, Xiuqiang He et al.

This paper introduces a conceptual foundation for Next Generation Grid Codes (NGGCs) based on stability and performance certificates, enabling the provision of dynamic ancillary services such as fast frequency and voltage regulation through decentralized frequency-domain criteria. The NGGC framework offers two key benefits: (i) rigorous closed-loop stability guarantees, and (ii) explicit performance guarantees for frequency and voltage dynamics in power systems. Regarding (i) stability, we employ loop-shifting and passivity-based techniques to derive local frequency-domain stability certificates for individual device dynamics. These certificates ensure the closed-loop stability of the entire interconnected power system through fully decentralized verification. Concerning (ii) performance, we establish quantitative bounds on critical time-domain indicators of system dynamics, including the average-mode frequency and voltage nadirs, the rate-of-change-of-frequency (RoCoF), steady-state deviations, and oscillation damping capabilities. The bounds are obtained by expressing the performance metrics as frequency-domain conditions on local device behavior. The NGGC framework is non-parametric, model-agnostic, and accommodates arbitrary device dynamics under mild assumptions. It thus provides a unified, decentralized approach to certifying both stability and performance without requiring explicit device-model parameterizations. Moreover, the NGGC framework can be directly used as a set of specifications for control design, offering a principled foundation for future stability- and performance-oriented grid codes in power systems.