SYApr 4, 2018
Moving horizon estimation for discrete-time linear systems with binary sensors: algorithms and stability resultsGiorgio Battistelli, Luigi Chisci, Stefano Gherardini
The paper addresses state estimation for linear discrete-time systems with binary (threshold) measurements. A Moving Horizon Estimation (MHE) approach is followed and different estimators, characterized by two different choices of the cost function to be minimized and/or by the possible inclusion of constraints, are proposed. Specifically, the cost function is either quadratic, when only the information pertaining to the threshold-crossing instants is exploited, or piece-wise quadratic, when all the available binary measurements are taken into account. Stability results are provided for the proposed MHE algorithms in the presence of unknown but bounded disturbances and measurement noises. Performance of the proposed techniques is also assessed by means of a simulation example.
SYApr 6, 2018
MAP moving horizon state estimation with binary measurementsGiorgio Battistelli, Luigi Chisci, Nicola Forti et al.
The paper addresses state estimation for discrete-time systems with binary (threshold) measurements by following a Maximum A posteriori Probability (MAP) approach and exploiting a Moving Horizon (MH) approximation of the MAP cost-function. It is shown that, for a linear system and noise distributions with log-concave probability density function, the proposed MH-MAP state estimator involves the solution, at each sampling interval, of a convex optimization problem. Application of the MH-MAP estimator to dynamic estimation of a diffusion field given pointwise-in-time-and-space binary measurements of the field is also illustrated and, finally, simulation results relative to this application are shown to demonstrate the effectiveness of the proposed approach.
QUANT-PHJan 12, 2023
Deep learning enhanced noise spectroscopy of a spin qubit environmentStefano Martina, Santiago Hernández-Gómez, Stefano Gherardini et al.
The undesired interaction of a quantum system with its environment generally leads to a coherence decay of superposition states in time. A precise knowledge of the spectral content of the noise induced by the environment is crucial to protect qubit coherence and optimize its employment in quantum device applications. We experimentally show that the use of neural networks can highly increase the accuracy of noise spectroscopy, by reconstructing the power spectral density that characterizes an ensemble of carbon impurities around a nitrogen-vacancy (NV) center in diamond. Neural networks are trained over spin coherence functions of the NV center subjected to different Carr-Purcell sequences, typically used for dynamical decoupling (DD). As a result, we determine that deep learning models can be more accurate than standard DD noise-spectroscopy techniques, by requiring at the same time a much smaller number of DD sequences.
QUANT-PHJun 25, 2019
Advances in sequential measurement and control of open quantum systemsStefano Gherardini, Andrea Smirne, Matthias M. Müller et al.
Novel concepts, perspectives and challenges in measuring and controlling an open quantum system via sequential schemes are shown. We discuss how similar protocols, relying both on repeated quantum measurements and dynamical decoupling control pulses, can allow to: (i) Confine and protect quantum dynamics from decoherence in accordance with the Zeno physics. (ii) Analytically predict the probability that a quantum system is transferred into a target quantum state by means of stochastic sequential measurements. (iii) Optimally reconstruct the spectral density of environmental noise sources by orthogonalizing in the frequency domain the filter functions driving the designed quantum-sensor. The achievement of these tasks will enhance our capability to observe and manipulate open quantum systems, thus bringing advances to quantum science and technologies.
QUANT-PHMay 4, 2018
Noise as a resourceStefano Gherardini
In this thesis we aim to analyze and quantify the energetic and information contents that can be extracted from a dynamical system subject to the external environment. The latter is usually assumed to be deleterious for the feasibility of specific control tasks, since it can be responsible for uncontrolled time-dependent changes of the system. However, if the effects of the random interaction with a noisy environment are properly modeled by the introduction of a given stochasticity within the dynamics of the system, then even noise contributions might be seen as control knobs. As a matter of fact, even a partial knowledge of the environment can allow to set the system in a dynamical condition in which the response is optimized by the presence of noise sources. In particular, we have investigated what kind of measurement devices can work better in noisy dynamical regimes and studied how to maximize the resultant information via the adoption of estimation algorithms. Moreover, we have shown the optimal interplay between quantum dynamics, environmental noise and complex network topology in maximizing the energy transport efficiency. Then, foundational scientific aspects, such as the occurrence of an ergodic property for the system-environment interaction modes of a randomly perturbed quantum system or the characterization of the stochastic quantum Zeno phenomena, have been analyzed by using the predictions of the large deviation theory. Finally, the energy cost in maintaining the system in the non-equilibrium regime due to the presence of the environment is evaluated by reconstructing the corresponding thermodynamics entropy production. In conclusion, the present thesis can constitute the basis for an effective resource theory of noise, which is given by properly engineering the interaction between a dynamical system and its external environment.
QUANT-PHFeb 9, 2022
Noise fingerprints in quantum computers: Machine learning software toolsStefano Martina, Stefano Gherardini, Lorenzo Buffoni et al.
In this paper we present the high-level functionalities of a quantum-classical machine learning software, whose purpose is to learn the main features (the fingerprint) of quantum noise sources affecting a quantum device, as a quantum computer. Specifically, the software architecture is designed to classify successfully (more than 99% of accuracy) the noise fingerprints in different quantum devices with similar technical specifications, or distinct time-dependences of a noise fingerprint in single quantum machines.
QUANT-PHSep 23, 2021
Learning the noise fingerprint of quantum devicesStefano Martina, Lorenzo Buffoni, Stefano Gherardini et al.
Noise sources unavoidably affect any quantum technological device. Noise's main features are expected to strictly depend on the physical platform on which the quantum device is realized, in the form of a distinguishable fingerprint. Noise sources are also expected to evolve and change over time. Here, we first identify and then characterize experimentally the noise fingerprint of IBM cloud-available quantum computers, by resorting to machine learning techniques designed to classify noise distributions using time-ordered sequences of measured outcome probabilities.
QUANT-PHJan 8, 2021
Machine learning classification of non-Markovian noise disturbing quantum dynamicsStefano Martina, Stefano Gherardini, Filippo Caruso
In this paper machine learning and artificial neural network models are proposed for the classification of external noise sources affecting a given quantum dynamics. For this purpose, we train and then validate support vector machine, multi-layer perceptron and recurrent neural network models with different complexity and accuracy, to solve supervised binary classification problems. As a result, we demonstrate the high efficacy of such tools in classifying noisy quantum dynamics using simulated data sets from different realizations of the quantum system dynamics. In addition, we show that for a successful classification one just needs to measure, in a sequence of discrete time instants, the probabilities that the analysed quantum system is in one of the allowed positions or energy configurations. Albeit the training of machine learning models is here performed on synthetic data, our approach is expected to find application in experimental schemes, as e.g. for the noise benchmarking of noisy intermediate-scale quantum devices.