Sai Swaminathan

Bibek Poudel, Sai Swaminathan, Weizi Li

Designing a transit network requires many sequential route extension decisions, but their quality is often visible only after the full network is assembled. This delayed-feedback challenge lies at the heart of the Transit Route Network Design Problem (TRNDP), where route interactions can be deceptive: an extension that appears useful locally can create transfer bottlenecks, produce redundant overlap, or reduce overall throughput. To guide route construction under delayed simulator feedback, we introduce AlphaTransit, a search-based planning framework for cityscale bus network design. AlphaTransit couples Monte Carlo Tree Search (MCTS) with a neural policy-value network: the policy proposes route extensions, the value estimates downstream design quality, and search uses these predictions to refine each decision. This provides decision-time lookahead during route construction without running simulator rollouts inside the search tree. We evaluate AlphaTransit on a new Bloomington TRNDP benchmark with realistic road topology and censusderived demand, under mixed and full transit demand settings. In the Bloomington network, AlphaTransit attains the highest service rate in both demand settings, reaching 54.6% and 82.1%, respectively. Relative to reinforcement learning without search, these correspond to 9.9% and 11.4% service rate gains; relative to MCTS without learned guidance, they correspond to 2.5% and 11.2% gains. These results suggest that coupling learned guidance with MCTS is more effective than using either approach alone for transit network design. Our code and data are publicly available in https://github.com/poudel-bibek/AlphaTransit.

Bibek Poudel, Lei Zhu, Kevin Heaslip et al.

Modern vision systems can detect, track, and forecast urban actors at scale, yet translating perception outputs to urban design remains limited. We introduce DeCoR, a two-stage reinforcement learning framework that leverages flow observations to co-optimize crosswalk layout and network-level signal control. The design stage encodes the pedestrian network as a graph and learns a generative policy that parameterizes a Gaussian mixture model over crosswalk location and width, from which new crosswalks are sampled. For each layout, a shared control policy learns adaptive signal timings to minimize joint pedestrian and vehicle delay. On a 750 m real-world urban corridor with demand sensed from video and Wi-Fi logs, DeCoR learns a layout that reduces pedestrian arrival time to their nearest crosswalk by 23% while using fewer crosswalks than existing configurations. On the control side, DeCoR reduces pedestrian and vehicle wait time by 79% and 65%, respectively, relative to fixed-time signalization. Further, the control policy generalizes to demands outside of training and is robust to layout changes without retraining.

Farong Wang, Sai Swaminathan, Fei Liu

Robotic manipulation tasks that require repeated tool motion along curved surfaces frequently arise in surface finishing, inspection, and guided interaction. In practice, nominal motion primitives are often designed independently of the deployment surface and later reused across varying geometries. Directly tiling such primitives onto nonplanar surfaces introduces geometric inconsistencies, leading to interpenetration, orientation discontinuities, and cumulative drift over repeated cycles. We present a two-stage framework that separates geometric embedding from execution-level regulation. An offline surface-constrained warping operator embeds a nominal periodic primitive onto curved surfaces through asymmetric diffeomorphic deformation of dual-track waypoints and axis-consistent orientation completion, producing a surface-adapted reference trajectory. An online contact-aware projection operator then enforces bounded deviation relative to this reference using FSR-driven disturbance adaptation and a conic orientation safety constraint. Experiments across multiple analytic surface families and real-robot validation on a sinusoidal surface demonstrate improved geometric continuity, reduced large orientation jumps, and robust contact maintenance compared with direct tiling. These results show that decoupling offline geometric remapping from lightweight online projection enables stable and repeatable surface-embedded trajectory execution under sensor-lite feedbacks.

Danny Scott, William LaForest, Hritom Das et al.

The deployment of dense, low-cost sensors is critical for realizing ubiquitous smart environments. However, existing sensing solutions struggle with the energy, scalability, and reliability trade-offs imposed by battery maintenance, wireless transmission overhead, and data processing complexity. In this work, we present Vibe2Spike, a novel battery-free, wireless sensing framework that enables vibration-based activity recognition using visible light communication (VLC) and spiking neural networks (SNNs). Our system uses ultra-low-cost tags composed only of a piezoelectric disc, a Zener diode, and an LED, which harvest vibration energy and emit sparse visible light spikes without requiring batteries or RF radios. These optical spikes are captured by event cameras and classified using optimized SNN models evolved via the EONS framework. We evaluate Vibe2Spike across five device classes, achieving 94.9\% average classification fitness while analyzing the latency-accuracy trade-offs of different temporal binning strategies. Vibe2Spike demonstrates a scalable, and energy-efficient approach for enabling intelligent environments in a batteryless manner.

Azizul Zahid, Jie Fan, Farong Wang et al.

Understanding action correspondence between humans and robots is essential for evaluating alignment in decision-making, particularly in human-robot collaboration and imitation learning within unstructured environments. We propose a multimodal demonstration learning framework that explicitly models human demonstrations from RGB video with robot demonstrations in voxelized RGB-D space. Focusing on the "pick and place" task from the RH20T dataset, we utilize data from 5 users across 10 diverse scenes. Our approach combines ResNet-based visual encoding for human intention modeling and a Perceiver Transformer for voxel-based robot action prediction. After 2000 training epochs, the human model reaches 71.67% accuracy, and the robot model achieves 71.8% accuracy, demonstrating the framework's potential for aligning complex, multimodal human and robot behaviors in manipulation tasks.