G Abarajithan

A. Rios-Navarro, S. Guo, G Abarajithan et al.

In-camera event denoising reduces the data rate of event cameras by filtering out noise at the source. A lightweight multilayer perceptron denoising filter (MLPF) provides state-of-the-art low-cost denoising accuracy. It processes a small neighborhood of pixels from the timestamp image around each event to discriminate signal and noise events. This paper proposes two digital logic implementations of the MLPF denoiser and quantifies their resource cost, power, and latency. The hardware MLPF quantizes the weights and hidden unit activations to 4 bits and has about 1k weights with about 40% sparsity. The Area-Under-Curve Receiver Operating Characteristic accuracy is nearly indistinguishable from that of the floating point network. The FPGA MLPF processes each event in 10 clock cycles. In FPGA, it uses 3.5k flip flops and 11.5k LUTs. Our ASIC implementation in 65nm digital technology for a 346x260 pixel camera occupies an area of 4.3mm^2 and consumes 4nJ of energy per event at event rates up to 25MHz. The MLPF can be easily integrated into an event camera using an FPGA or as an ASIC directly on the camera chip or in the same package. This denoising could dramatically reduce the energy consumed by the communication and host processor and open new areas of always-on event camera application under scavenged and battery power. Code: https://github.com/SensorsINI/dnd_hls

G Abarajithan, Zhenghua Ma, Ravidu Munasinghe et al.

The scientific community increasingly relies on machine learning (ML) for near-sensor processing, leveraging its strengths in tasks such as pattern recognition, anomaly detection, and real-time decision-making. These deployments demand accelerators that combine extremely high performance with programmability, ease of integration, and straightforward verification. We present cgra4ml, an open-source, modular framework that generates parameterizable CGRA accelerators in synthesizable SystemVerilog RTL, tailored to common ML compute patterns found in scientific applications. The framework supports seamless system integration through AXI-compliant interfaces and open-source DMA components, and it includes automatic firmware generation for programming the accelerator. A comprehensive verification suite and a runtime firmware stack further support deployment across diverse SoC platforms. cgra4ml provides a modular, full-stack infrastructure, including a Python API, SystemVerilog hardware, TCL toolflows, and a C runtime, which facilitates easy integration and experimentation, allowing scientists to focus on innovation rather than dealing with the intricacies of hardware design and optimization. We demonstrate the effectiveness of cgra4ml to implement common scientific edge neural networks using ASIC and FPGA design flows.

Zhenghua Ma, G Abarajithan, Dimitrios Danopoulos et al.

Extreme-edge scientific applications use machine learning models to analyze sensor data and make real-time decisions. Their stringent latency and throughput requirements demand small batch sizes and require that model weights remain fully on-chip. Spatial dataflow implementations are common for extreme-edge applications. Spatial dataflow works well for small networks, but it fails to scale to larger models due to inherent resource scaling limitations. AI Engines on modern FPGA SoCs offer a promising alternative with high compute density and additional on-chip memory. However, the architecture, programming model, and performance-scaling behavior of AI Engines differ fundamentally from those of the programmable logic, making direct comparison non-trivial and the benefits of using AI Engines unclear. This work addresses how and when extreme-edge scientific neural networks should be implemented on AI Engines versus programmable logic. We provide systematic architectural characterization and micro-benchmarking and introduce a latency-adjusted resource equivalence (LARE) metric that identifies when AI Engine implementations outperform programmable logic designs. We further propose spatial and API-level dataflow optimizations tailored to low-latency scientific inference. Finally, we demonstrate the successful deployment of end-to-end neural networks on AI Engines that cannot fit on programmable logic when using the hlsml toolchain.

G Abarajithan, Zhenghua Ma, Francesco Restuccia et al.

Hardware-firmware integration is becoming a productivity bottleneck due to the increasing complexity of accelerators, characterized by intricate memory hierarchies and firmware-intensive execution. While numerous verification techniques focus on early-stage, approximate modeling of such systems to speed up initial development, developers still rely heavily on FPGA emulation to integrate firmware with RTL/HLS hardware, resulting in significant delays in debug iterations and time-to-market. We present a fast, cycle-accurate co-verification framework that bridges production firmware and RTL/gate-level hardware. FIREBRIDGE enables firmware debugging, profiling, and verification in seconds using standard simulators such as VCS, Vivado Xsim, or Xcelium, by compiling the firmware for x86 and bridging it with simulated subsystems via randomized memory bridges. Our approach provides off-chip data movement profiling, memory congestion emulation, and register-level protocol testing, which are critical for modern accelerator verification. We demonstrate a speedup of up to 50x in debug iteration over the conventional FPGA-based flow for system integration between RTL/HLS and production firmware on various types of accelerators, such as systolic arrays and CGRAs, while ensuring functional equivalence. FIREBRIDGE accelerates system integration by supporting robust co-verification of hardware and firmware, and promotes a structured, parallel development workflow tailored for teams building heterogeneous computing platforms.