Daniel Engelsman

Daniel Engelsman, Itzik Klein

The performance of inertial navigation systems is largely dependent on the stable flow of external measurements and information to guarantee continuous filter updates and bind the inertial solution drift. Platforms in different operational environments may be prevented at some point from receiving external measurements, thus exposing their navigation solution to drift. Over the years, a wide variety of works have been proposed to overcome this shortcoming, by exploiting knowledge of the system current conditions and turning it into an applicable source of information to update the navigation filter. This paper aims to provide an extensive survey of information aided navigation, broadly classified into direct, indirect, and model aiding. Each approach is described by the notable works that implemented its concept, use cases, relevant state updates, and their corresponding measurement models. By matching the appropriate constraint to a given scenario, one will be able to improve the navigation solution accuracy, compensate for the lost information, and uncover certain internal states, that would otherwise remain unobservable.

Daniel Engelsman, Yair Stolero, Itzik Klein

Inertial navigation systems (INS) are widely used in almost any operational environment, including aviation, marine, and land vehicles. Inertial measurements from accelerometers and gyroscopes allow the INS to estimate position, velocity, and orientation of its host vehicle. However, as inherent sensor measurement errors propagate into the state estimates, accuracy degrades over time. To mitigate the resulting drift in state estimates, different approaches of parametric and state estimation are proposed to compensate for undesirable errors, using frequency-domain filtering or external information fusion. Another approach uses multiple inertial sensors, a field with rapid growth potential and applications. The increased sampling of the observed phenomenon results in the improvement of several key factors such as signal accuracy, frequency resolution, noise rejection, and higher redundancy. This study offers an analysis tutorial of basic multiple inertial operation, with a new perspective on the error relationship to time, and number of sensors. To that end, a stationary and levelled sensors array is taken, and its robustness against the instrumental errors is analyzed. Subsequently, the hypothesized analytical model is compared with the experimental results, and the level of agreement between them is thoroughly discussed. Ultimately, our results showcase the vast potential of employing multiple sensors, as we observe improvements spanning from the signal level to the navigation states. This tutorial is suitable for both newcomers and people experienced with multiple inertial sensors.

Daniel Engelsman, Itzik Klein

In underwater navigation, accurate heading information is crucial for accurately and continuously tracking trajectories, especially during extended missions beneath the waves. In order to determine the initial heading, a gyrocompassing procedure must be employed. As unmanned underwater vehicles (UUV) are susceptible to ocean currents and other disturbances, the model-based gyrocompassing procedure may experience degraded performance. To cope with such situations, this paper introduces a dedicated learning framework aimed at mitigating environmental effects and offering precise underwater gyrocompassing. Through the analysis of the dynamic UUV signature obtained from inertial measurements, our proposed framework learns to refine disturbed signals, enabling a focused examination of the earth's rotation rate vector. Leveraging recent machine learning advancements, empirical simulations assess the framework's adaptability to challenging underwater conditions. Ultimately, its contribution lies in providing a resilient gyrocompassing solution for UUVs.

Daniel Engelsman, Itzik Klein

Autonomous systems across diverse domains have underscored the need for drift-resilient state estimation. Although satellite-based positioning and cameras are widely used, they often suffer from limited availability in many environments. As a result, positioning must rely solely on inertial sensors, leading to rapid accuracy degradation over time due to sensor biases and noise. To counteract this, alternative update sources-referred to as information aiding-serve as anchors of certainty. Among these, the zero-velocity update (ZUPT) is particularly effective in providing accurate corrections during stationary intervals, though it is restricted to surface-bound platforms. This work introduces a controlled ZUPT (C-ZUPT) approach for aerial navigation and control, independent of surface contact. By defining an uncertainty threshold, C-ZUPT identifies quasi-static equilibria to deliver precise velocity updates to the estimation filter. Extensive validation confirms that these opportunistic, high-quality updates significantly reduce inertial drift and control effort. As a result, C-ZUPT mitigates filter divergence and enhances navigation stability, enabling more energy-efficient hovering and substantially extending sustained flight-key advantages for resource-constrained aerial systems.

Gershy Ben-Arie, Daniel Engelsman, Rotem Dror et al.

An accurate initial heading angle is essential for efficient and safe navigation across diverse domains. Unlike magnetometers, gyroscopes can provide accurate heading reference independent of the magnetic disturbances in a process known as gyrocompassing. Yet, accurate and timely gyrocompassing, using low-cost gyroscopes, remains a significant challenge in scenarios where external navigation aids are unavailable. Such challenges are commonly addressed in real-world applications such as autonomous vehicles, where size, weight, and power limitations restrict sensor quality, and noisy measurements severely degrade gyrocompassing performance. To cope with this challenge, we propose a novel diffusion denoiser-aided gyrocompass approach. It integrates a diffusion-based denoising framework with an enhanced learning-based heading estimation model. The diffusion denoiser processes raw inertial sensor signals before input to the deep learning model, resulting in accurate gyrocompassing. Experiments using both simulated and real sensor data demonstrate that our proposed approach improves gyrocompassing accuracy by 26% compared to model-based gyrocompassing and by 15% compared to other learning-driven approaches. This advancement holds particular significance for ensuring accurate and robust navigation in autonomous platforms that incorporate low-cost gyroscopes within their navigation systems.

Daniel Engelsman, Itzik Klein

Linear quadratic Gaussian (LQG) control is a well-established method for optimal control through state estimation, particularly in stabilizing an inverted pendulum on a cart. In standard laboratory setups, sensor redundancy enables direct measurement of configuration variables using displacement sensors and rotary encoders. However, in outdoor environments, dynamically stable mobile platforms-such as Segways, hoverboards, and bipedal robots-often have limited sensor availability, restricting state estimation primarily to attitude stabilization. Since the tilt angle cannot be directly measured, it is typically estimated through sensor fusion, increasing reliance on inertial sensors and necessitating a lightweight, self-contained perception module. Prior research has not incorporated accelerometer data into the LQG framework for stabilizing pendulum-like systems, as jerk states are not explicitly modeled in the Newton-Euler formalism. In this paper, we address this gap by leveraging local differential flatness to incorporate higher-order dynamics into the system model. This refinement enhances state estimation, enabling a more robust LQG controller that predicts accelerations for dynamically stable mobile platforms.

Daniel Engelsman

Modern technological advancements constantly push forward the human-machine interaction. Evolutionary Algorithms (EA) are an machine learning (ML) subclass inspired by the process of natural selection - Survival of the Fittest, as stated by the Darwinian Theory of Evolution. The most notable algorithm in that class is the Genetic Algorithm (GA) - a powerful heuristic tool which enables the generation of a high-quality solutions to optimization problems. In recent decades the algorithm underwent remarkable improvement, which adapted it into a wide range of engineering problems, by heuristically searching for the optimal solution. Despite being well-defined, many engineering problems may suffer from heavy analytical entanglement when approaching the derivation process, as required in classic optimization methods. Therefore, the main motivation here, is to work around that obstacle. In this piece of work, I would like to harness the GA capabilities to examine optimality with respect to a unique combustion problem, in a way that was never performed before. To be more precise, I would like to utilize it to answer the question : What form of an initial droplet size distribution (iDSD) will guarantee an optimal flame ? To answer this question, I will first provide a general introduction to the GA method, then develop the combustion model, and eventually merge both into an optimization problem.