Tobias Gburrek

Joerg Schmalenstroeer, Tobias Gburrek, Reinhold Haeb-Umbach

We present LibriWASN, a data set whose design follows closely the LibriCSS meeting recognition data set, with the marked difference that the data is recorded with devices that are randomly positioned on a meeting table and whose sampling clocks are not synchronized. Nine different devices, five smartphones with a single recording channel and four microphone arrays, are used to record a total of 29 channels. Other than that, the data set follows closely the LibriCSS design: the same LibriSpeech sentences are played back from eight loudspeakers arranged around a meeting table and the data is organized in subsets with different percentages of speech overlap. LibriWASN is meant as a test set for clock synchronization algorithms, meeting separation, diarization and transcription systems on ad-hoc wireless acoustic sensor networks. Due to its similarity to LibriCSS, meeting transcription systems developed for the former can readily be tested on LibriWASN. The data set is recorded in two different rooms and is complemented with ground-truth diarization information of who speaks when.

Tobias Gburrek, Joerg Schmalenstroeer, Reinhold Haeb-Umbach

A wireless acoustic sensor network records audio signals with sampling time and sampling rate offsets between the audio streams, if the analog-digital converters (ADCs) of the network devices are not synchronized. Here, we introduce a new sampling rate offset model to simulate time-varying sampling frequencies caused, for example, by temperature changes of ADC crystal oscillators, and propose an estimation algorithm to handle this dynamic aspect in combination with changing acoustic source positions. Furthermore, we show how deep neural network based estimates of the distances between microphones and human speakers can be used to determine the sampling time offsets. This enables a synchronization of the audio streams to reflect the physical time differences of flight.

Tobias Gburrek, Joerg Schmalenstroeer, Reinhold Haeb-Umbach

In this paper we present an approach to geometry calibration in wireless acoustic sensor networks, whose nodes are assumed to be equipped with a compact microphone array. The proposed approach solely works with estimates of the distances between acoustic sources and the nodes that record these sources. It consists of an iterative weighted least squares localization procedure, which is initialized by multidimensional scaling. Alongside the sensor node locations, also the positions of the acoustic sources are estimated. Furthermore, we derive the Cramer-Rao lower bound (CRLB) for source and sensor position estimation, and show by simulation that the estimator is efficient.

Tobias Gburrek, Joerg Schmalenstroeer, Andreas Brendel et al.

We present an approach to deep neural network based (DNN-based) distance estimation in reverberant rooms for supporting geometry calibration tasks in wireless acoustic sensor networks. Signal diffuseness information from acoustic signals is aggregated via the coherent-to-diffuse power ratio to obtain a distance-related feature, which is mapped to a source-to-microphone distance estimate by means of a DNN. This information is then combined with direction-of-arrival estimates from compact microphone arrays to infer the geometry of the sensor network. Unlike many other approaches to geometry calibration, the proposed scheme does only require that the sampling clocks of the sensor nodes are roughly synchronized. In simulations we show that the proposed DNN-based distance estimator generalizes to unseen acoustic environments and that precise estimates of the sensor node positions are obtained.