Amirhossein Kazemipour

Nico Gürtler, Felix Widmaier, Cansu Sancaktar et al. · deepmind

Experimentation on real robots is demanding in terms of time and costs. For this reason, a large part of the reinforcement learning (RL) community uses simulators to develop and benchmark algorithms. However, insights gained in simulation do not necessarily translate to real robots, in particular for tasks involving complex interactions with the environment. The Real Robot Challenge 2022 therefore served as a bridge between the RL and robotics communities by allowing participants to experiment remotely with a real robot - as easily as in simulation. In the last years, offline reinforcement learning has matured into a promising paradigm for learning from pre-collected datasets, alleviating the reliance on expensive online interactions. We therefore asked the participants to learn two dexterous manipulation tasks involving pushing, grasping, and in-hand orientation from provided real-robot datasets. An extensive software documentation and an initial stage based on a simulation of the real set-up made the competition particularly accessible. By giving each team plenty of access budget to evaluate their offline-learned policies on a cluster of seven identical real TriFinger platforms, we organized an exciting competition for machine learners and roboticists alike. In this work we state the rules of the competition, present the methods used by the winning teams and compare their results with a benchmark of state-of-the-art offline RL algorithms on the challenge datasets.

Amirhossein Kazemipour, Robert K. Katzschmann · eth-zurich, mit

Antagonistic artificial muscles can decouple joint torque and stiffness, but contact transients often degrade this independence. We present a unified real-time framework applicable across pneumatic, electrohydraulic, and dielectric elastomer artificial muscle families: a separable Padé force model with a minimal two-state dynamic wrapper, a cascaded inverse-dynamics controller in co-contraction/bias coordinates, and a bio-inspired depth-adaptive interaction policy that schedules stiffness based on penetration depth. The controller runs in under 1 ms per control tick and demonstrates independent torque and stiffness tracking, including a fixed-torque stiffness-step test that preserves torque regulation through stiffness transitions. In a coupled impedance contact protocol simulated across soft-to-rigid environments, comparing depth-adaptive stiffness to fixed-stiffness baselines reveals a shock/load versus stability tradeoff. These results provide a control-oriented foundation for musculoskeletal antagonistic robots to execute adaptive impedance behaviors in dynamic interactions.

Misato Sonoda, Ronan Hinchet, Amirhossein Kazemipour et al. · eth-zurich, mit

Robotic manipulation in unstructured environments requires end-effectors that combine high kinematic dexterity with physical compliance. While traditional rigid hands rely on complex external sensors for safe interaction, electrohydraulic actuators offer a promising alternative. This paper presents the design, control, and evaluation of a novel musculoskeletal robotic hand architecture powered entirely by remote Peano-HASEL actuators, specifically optimized for safe manipulation. By relocating the actuators to the forearm, we functionally isolate the grasping interface from electrical hazards while maintaining a slim, human-like profile. To address the inherently limited linear contraction of these soft actuators, we integrate a 1:2 pulley routing mechanism that mechanically amplifies tendon displacement. The resulting system prioritizes compliant interaction over high payload capacity, leveraging the intrinsic force-limiting characteristics of the actuators to provide a high level of inherent safety. Furthermore, this physical safety is augmented by the self-sensing nature of the HASEL actuators. By simply monitoring the operating current, we achieve real-time grasp detection and closed-loop contact-aware control without relying on external force transducers or encoders. Experimental results validate the system's dexterity and inherent safety, demonstrating the successful execution of various grasp taxonomies and the non-destructive grasping of highly fragile objects, such as a paper balloon. These findings highlight a significant step toward simplified, inherently compliant soft robotic manipulation.

Paul Leonard Wolff, Hugo Buurmeijer, Luis Pabon et al. · eth-zurich, mit

Continuum robots exhibit high-dimensional, nonlinear dynamics which are often coupled with their actuation mechanism. Spectral submanifold (SSM) reduction has emerged as a leading method for reducing high-dimensional nonlinear dynamical systems to low-dimensional invariant manifolds. Our proposed control-augmented SSMs (caSSMs) extend this methodology by explicitly incorporating control inputs into the state representation, enabling these models to capture nonlinear state-input couplings. Training these models relies solely on controlled decay trajectories of the actuator-augmented state, thereby removing the additional actuation-calibration step commonly needed by prior SSM-for-control methods. We learn a compact caSSM model for a tendon-driven trunk robot, enabling real-time control and reducing open-loop prediction error by 40% compared to existing methods. In closed-loop experiments with model predictive control (MPC), caSSM reduces tracking error by 52%, demonstrating improved performance against Koopman and SSM based MPC and practical deployability on hardware continuum robots.

Amirhossein Kazemipour, Maram Khatib, Khaled Al Khudir et al.

We present a generalized version of the Saturation in the Null Space (SNS) algorithm for the task control of redundant robots when hard inequality constraints are simultaneously present both in the joint and in the Cartesian space. These hard bounds should never be violated, are treated equally and in a unified way by the algorithm, and may also be varied, inserted or deleted online. When a joint/Cartesian bound saturates, the robot redundancy is exploited to continue fulfilling the primary task. If no feasible solution exists, an optimal scaling procedure is applied to enforce directional consistency with the original task. Simulation and experimental results on different robotic systems demonstrate the efficiency of the approach. The proposed algorithm can be viewed as a generic platform that is easily applicable to any robotic application in which robots operate in an unstructured environment and online handling of joint and Cartesian constraints is critical.

Oliver Fischer, Yasunori Toshimitsu, Amirhossein Kazemipour et al.

Dynamic motions are a key feature of robotic arms, enabling them to perform tasks quickly and efficiently. Soft continuum manipulators do not currently consider dynamic parameters when operating in task space. This shortcoming makes existing soft robots slow and limits their ability to deal with external forces, especially during object manipulation. We address this issue by using dynamic operational space control. Our control approach takes into account the dynamic parameters of the 3D continuum arm and introduces new models that enable multi-segment soft manipulators to operate smoothly in task space. Advanced control methods, previously afforded only to rigid robots, are now adapted to soft robots; for example, potential field avoidance was previously only shown for rigid robots and is now extended to soft robots. Using our approach, a soft manipulator can now achieve a variety of tasks that were previously not possible: we evaluate the manipulator's performance in closed-loop controlled experiments such as pick-and-place, obstacle avoidance, throwing objects using an attached soft gripper, and deliberately applying forces to a surface by drawing with a grasped piece of chalk. Besides the newly enabled skills, our approach improves tracking accuracy by 59% and increases speed by a factor of 19.3 compared to state of the art for task space control. With these newfound abilities, soft robots can start to challenge rigid robots in the field of manipulation. Our inherently safe and compliant soft robot moves the future of robotic manipulation towards a cageless setup where humans and robots work in parallel.

Amirhossein Kazemipour, Maram Khatib, Khaled Al Khudir et al.

We present an improved version of the Saturation in the Null Space (SNS) algorithm for redundancy resolution at the velocity level. In addition to hard bounds on joint space motion, we consider also Cartesian box constraints that cannot be violated at any time. The modified algorithm combines all bounds into a single augmented generalised vector and gives equal, highest priority to all inequality constraints. When needed, feasibility of the original task is enforced by the SNS task scaling procedure. Simulation results are reported for a 6R planar robot.

Amirhossein Kazemipour, Oliver Fischer, Yasunori Toshimitsu et al.

Soft robots are made of compliant materials and perform tasks that are challenging for rigid robots. However, their continuum nature makes it difficult to develop model-based control strategies. This work presents a robust model-based control scheme for soft continuum robots. Our dynamic model is based on the Euler-Lagrange approach, but it uses a more accurate description of the robot's inertia and does not include oversimplified assumptions. Based on this model, we introduce an adaptive sliding mode control scheme, which is robust against model parameter uncertainties and unknown input disturbances. We perform a series of experiments with a physical soft continuum arm to evaluate the effectiveness of our controller at tracking task-space trajectory under different payloads. The tracking performance of the controller is around 38\% more accurate than that of a state-of-the-art controller, i.e., the inverse dynamics method. Moreover, the proposed model-based control design is flexible and can be generalized to any continuum robotic arm with an arbitrary number of segments. With this control strategy, soft robotic object manipulation can become more accurate while remaining robust to disturbances.