Yuki Kadokawa

Yuki Kadokawa, Lingwei Zhu, Yoshihisa Tsurumine et al.

Deep reinforcement learning with domain randomization learns a control policy in various simulations with randomized physical and sensor model parameters to become transferable to the real world in a zero-shot setting. However, a huge number of samples are often required to learn an effective policy when the range of randomized parameters is extensive due to the instability of policy updates. To alleviate this problem, we propose a sample-efficient method named cyclic policy distillation (CPD). CPD divides the range of randomized parameters into several small sub-domains and assigns a local policy to each one. Then local policies are learned while cyclically transitioning to sub-domains. CPD accelerates learning through knowledge transfer based on expected performance improvements. Finally, all of the learned local policies are distilled into a global policy for sim-to-real transfers. CPD's effectiveness and sample efficiency are demonstrated through simulations with four tasks (Pendulum from OpenAIGym and Pusher, Swimmer, and HalfCheetah from Mujoco), and a real-robot, ball-dispersal task. We published code and videos from our experiments at https://github.com/yuki-kadokawa/cyclic-policy-distillation.

Yoshihisa Tsurumine, Yuki Kadokawa, Kohei Hayashi et al.

Robotic cloth untangling requires progressively disentangling fabric by adapting pulling actions to changing contact and tension conditions. Because large-scale real-world training is impractical due to cloth damage and hardware wear, sim-to-real policy transfer is a promising solution. However, cloth manipulation is highly sensitive to interaction dynamics, and policies that depend on precise force magnitudes often fail after transfer because similar force responses cannot be reproduced due to the reality gap. We observe that untangling is largely characterized by qualitative tension transitions rather than exact force values. This indicates that directly minimizing the sim-to-real gap in raw force measurements does not necessarily align with the task structure. We therefore hypothesize that emphasizing coarse force-change patterns while suppressing fine environment-dependent variations can improve robustness of sim-to-real transfer. Based on this insight, we propose Adaptive Force-Difference Quantization (ADQ), which reduces observation resolution by representing force inputs as discretized temporal differences and learning state-dependent quantization thresholds adaptively. This representation mitigates overfitting to environment-specific force characteristics and facilitates direct sim-to-real transfer. Experiments in both simulation and real-world cloth untangling demonstrate that ADQ achieves higher success rates and exhibits greater robustness in sim-to-real transfer than policies using raw force inputs. Supplementary video is available at https://youtu.be/ZeoBs-t0AWc

Issa Nakamura, Tomoya Yamanokuchi, Yuki Kadokawa et al.

Goal-Conditioned Reinforcement Learning (GCRL) is a framework for learning a policy that can reach arbitrarily given goals. In particular, Contrastive Reinforcement Learning (CRL) provides a framework for policy updates using an approximation of the value function estimated via contrastive learning, achieving higher sample efficiency compared to conventional methods. However, since CRL treats the visited state as a pseudo-goal during learning, it can accurately estimate the value function only for limited goals. To address this issue, we propose a novel data augmentation approach for CRL called ViSA (Visited-State Augmentation). ViSA consists of two components: 1) generating augmented state samples, with the aim of augmenting hard-to-visit state samples during on-policy exploration, and 2) learning consistent embedding space, which uses an augmented state as auxiliary information to regularize the embedding space by reformulating the objective function of the embedding space based on mutual information. We evaluate ViSA in simulation and real-world robotic tasks and show improved goal-space generalization, which permits accurate value estimation for hard-to-visit goals. Further details can be found on the project page: \href{https://issa-n.github.io/projectPage_ViSA/}{\texttt{https://issa-n.github.io/projectPage\_ViSA/}}

Yuki Kadokawa, Hirotaka Tahara, Takamitsu Matsubara

In earthwork and construction, excavators often encounter large rocks mixed with various soil conditions, requiring skilled operators. This paper presents a framework for achieving autonomous excavation using reinforcement learning (RL) through a rock excavation simulator. In the simulation, resolution can be defined by the particle size/number in the whole soil space. Fine-resolution simulations closely mimic real-world behavior but demand significant calculation time and challenging sample collection, while coarse-resolution simulations enable faster sample collection but deviate from real-world behavior. To combine the advantages of both resolutions, we explore using policies developed in coarse-resolution simulations for pre-training in fine-resolution simulations. To this end, we propose a novel policy learning framework called Progressive-Resolution Policy Distillation (PRPD), which progressively transfers policies through some middle-resolution simulations with conservative policy transfer to avoid domain gaps that could lead to policy transfer failure. Validation in a rock excavation simulator and nine real-world rock environments demonstrated that PRPD reduced sampling time to less than 1/7 while maintaining task success rates comparable to those achieved through policy learning in a fine-resolution simulation.

Kazuki Shibata, Ryosuke Sota, Shandil Dhiresh Bosch et al.

Generalizing decentralized multi-robot cooperative transport across objects with diverse shapes and physical properties remains a fundamental challenge. Under decentralized execution, two key challenges arise: object-dependent representation learning under partial observability and coordination learning in multi-agent reinforcement learning (MARL) under non-stationarity. A typical approach jointly optimizes object-dependent representations and coordinated policies in an end-to-end manner while randomizing object shapes and physical properties during training. However, this joint optimization tightly couples representation and coordination learning, introducing bidirectional interference: inaccurate representations under partial observability destabilize coordination learning, while non-stationarity in MARL further degrades representation learning, resulting in sample-inefficient training. To address this structural coupling, we propose DeReCo, a novel MARL framework that decouples representation and coordination learning for object-adaptive multi-robot cooperative transport, improving sample efficiency and generalization across objects and transport scenarios. DeReCo adopts a three-stage training strategy: (1) centralized coordination learning with privileged object information, (2) reconstruction of object-dependent representations from local observations, and (3) progressive removal of privileged information for decentralized execution. This decoupling mitigates interference between representation and coordination learning and enables stable and sample-efficient training. Experimental results show that DeReCo outperforms baselines in simulation on three training objects, generalizes to six unseen objects with varying masses and friction coefficients, and achieves superior performance on two unseen objects in real-robot experiments.

Po-Yen Wu, Cheng-Yu Kuo, Yuki Kadokawa et al.

In inaccessible environments with uncertain task demands, robots often rely on general-purpose tools that lack predefined usage strategies. These tools are not tailored for particular operations, making their longevity highly sensitive to how they are used. This creates a fundamental challenge: how can a robot learn a tool-use policy that both completes the task and prolongs the tool's lifespan? In this work, we address this challenge by introducing a reinforcement learning (RL) framework that incorporates tool lifespan as a factor during policy optimization. Our framework leverages Finite Element Analysis (FEA) and Miner's Rule to estimate Remaining Useful Life (RUL) based on accumulated stress, and integrates the RUL into the RL reward to guide policy learning toward lifespan-guided behavior. To handle the fact that RUL can only be estimated after task execution, we introduce an Adaptive Reward Normalization (ARN) mechanism that dynamically adjusts reward scaling based on estimated RULs, ensuring stable learning signals. We validate our method across simulated and real-world tool use tasks, including Object-Moving and Door-Opening with multiple general-purpose tools. The learned policies consistently prolong tool lifespan (up to 8.01x in simulation) and transfer effectively to real-world settings, demonstrating the practical value of learning lifespan-guided tool use strategies.

Yuki Kadokawa, Yoshihisa Tsurumine, Takamitsu Matsubara

This paper explores a Deep Reinforcement Learning (DRL) approach for designing image-based control for edge robots to be implemented on Field Programmable Gate Arrays (FPGAs). Although FPGAs are more power-efficient than CPUs and GPUs, a typical DRL method cannot be applied since they are composed of many Logic Blocks (LBs) for high-speed logical operations but low-speed real-number operations. To cope with this problem, we propose a novel DRL algorithm called Binarized P-Network (BPN), which learns image-input control policies using Binarized Convolutional Neural Networks (BCNNs). To alleviate the instability of reinforcement learning caused by a BCNN with low function approximation accuracy, our BPN adopts a robust value update scheme called Conservative Value Iteration, which is tolerant of function approximation errors. We confirmed the BPN's effectiveness through applications to a visual tracking task in simulation and real-robot experiments with FPGA.