Pasquale Davide Schiavone

Simone Machetti, Pasquale Davide Schiavone, Lara Orlandic et al.

Graphics processing units (GPUs) excel at parallel processing, but remain largely unexplored in ultra-low-power edge devices (TinyAI) due to their power and area limitations, as well as the lack of suitable programming frameworks. To address these challenges, this work introduces embedded GPU (e-GPU), an open-source and configurable RISC-V GPU platform designed for TinyAI devices. Its extensive configurability enables area and power optimization, while a dedicated Tiny-OpenCL implementation provides a lightweight programming framework tailored to resource-constrained environments. To demonstrate its adaptability in real-world scenarios, we integrate the e-GPU with the eXtendible Heterogeneous Energy-Efficient Platform (X-HEEP) to realize an accelerated processing unit (APU) for TinyAI applications. Multiple instances of the proposed system, featuring varying e-GPU configurations, are implemented in TSMC's 16 nm SVT CMOS technology and are operated at 300 MHz and 0.8 V. Their area and leakage characteristics are analyzed to ensure alignment with TinyAI constraints. To assess both runtime overheads and computational efficiency, we employ two benchmarks: General Matrix Multiply (GeMM) and bio-signal processing (TinyBio) workloads. The GeMM benchmark is used to quantify the scheduling overhead introduced by the Tiny-OpenCL framework. The results show that the delay becomes negligible for matrix sizes larger than 256x256 (or equivalent problem sizes). The TinyBio benchmark is then used to evaluate performance and energy improvements over the baseline host under pure processing conditions. The results indicate that the high-range e-GPU configuration with 16 threads achieves up to a 15.1x speed-up and reduces energy consumption by up to 3.1x, while incurring only a 2.5x area overhead and operating within a 28 mW power budget.

Alireza Amirshahi, Maedeh H. Toosi, Siamak Mohammadi et al.

Wearable systems provide continuous health monitoring and can lead to early detection of potential health issues. However, the lifecycle of wearable systems faces several challenges. First, effective model training for new wearable devices requires substantial labeled data from various subjects collected directly by the wearable. Second, subsequent model updates require further extensive labeled data for retraining. Finally, frequent model updating on the wearable device can decrease the battery life in long-term data monitoring. Addressing these challenges, in this paper, we propose MetaWearS, a meta-learning method to reduce the amount of initial data collection required. Moreover, our approach incorporates a prototypical updating mechanism, simplifying the update process by modifying the class prototype rather than retraining the entire model. We explore the performance of MetaWearS in two case studies, namely, the detection of epileptic seizures and the detection of atrial fibrillation. We show that by fine-tuning with just a few samples, we achieve 70% and 82% AUC for the detection of epileptic seizures and the detection of atrial fibrillation, respectively. Compared to a conventional approach, our proposed method performs better with up to 45% AUC. Furthermore, updating the model with only 16 minutes of additional labeled data increases the AUC by up to 5.3%. Finally, MetaWearS reduces the energy consumption for model updates by 456x and 418x for epileptic seizure and AF detection, respectively.

David Mallasén, Pasquale Davide Schiavone, Alberto A. Del Barrio et al.

Wearable edge AI biomedical devices are increasingly being used for continuous patient health monitoring, enabling real-time insights and extended data collection without the need for prolonged hospital stays. These devices must be energy efficient to minimize battery size, improve comfort, and reduce recharging intervals. This paper investigates the use of specialized low-precision arithmetic formats to enhance the energy efficiency of edge AI biomedical wearables. Specifically, we explore posit arithmetic, a floating-point-like representation, in two biomedical applications that leverage supervised and unsupervised learning algorithms: cough detection for chronic cough monitoring and R peak detection in ECG analysis. Our results reveal that 16-bit posits can replace 32-bit IEEE 754 floating point numbers with minimal accuracy loss in cough detection. For R peak detection, posit arithmetic achieves satisfactory accuracy with as few as 10 or 8 bits, compared to the 16-bit requirement for floating-point formats. To validate these findings beyond algorithm-level simulations, we introduce PHEE, a modular and extensible architecture that integrates the Coprosit posit coprocessor within a RISC-V-based system. Using the X-HEEP framework, PHEE serves as a proof-of-concept platform to quantify the practical energy benefits of low-precision posits in edge AI systems. Post-synthesis results targeting 16 nm TSMC technology show that the posit hardware targeting these ML-based biomedical applications can be 38% smaller and consume up to 42.3% less power at the functional unit level, with no performance compromise. These findings establish the potential of low-precision posit arithmetic to significantly improve the energy efficiency of edge AI biomedical devices.

Dimitrios Samakovlis, Stefano Albini, Rubén Rodríguez Álvarez et al.

The design of low-power wearables for the biomedical domain has received a lot of attention in recent decades, as technological advances in chip manufacturing have allowed real-time monitoring of patients using low-complexity ML within the mW range. Despite advances in application and hardware design research, the domain lacks a systematic approach to hardware evaluation. In this work, we propose BiomedBench, a new benchmark suite composed of complete end-to-end TinyML biomedical applications for real-time monitoring of patients using wearable devices. Each application presents different requirements during typical signal acquisition and processing phases, including varying computational workloads and relations between active and idle times. Furthermore, our evaluation of five state-of-the-art low-power platforms in terms of energy efficiency shows that modern platforms cannot effectively target all types of biomedical applications. BiomedBench is released as an open-source suite to standardize hardware evaluation and guide hardware and application design in the TinyML wearable domain.

Alfio Di Mauro, Francesco Conti, Pasquale Davide Schiavone et al.

Binary Neural Networks (BNNs) have been shown to be robust to random bit-level noise, making aggressive voltage scaling attractive as a power-saving technique for both logic and SRAMs. In this work, we introduce the first fully programmable IoT end-node system-on-chip (SoC) capable of executing software-defined, hardware-accelerated BNNs at ultra-low voltage. Our SoC exploits a hybrid memory scheme where error-vulnerable SRAMs are complemented by reliable standard-cell memories to safely store critical data under aggressive voltage scaling. On a prototype in 22nm FDX technology, we demonstrate that both the logic and SRAM voltage can be dropped to 0.5Vwithout any accuracy penalty on a BNN trained for the CIFAR-10 dataset, improving energy efficiency by 2.2X w.r.t. nominal conditions. Furthermore, we show that the supply voltage can be dropped to 0.42V (50% of nominal) while keeping more than99% of the nominal accuracy (with a bit error rate ~1/1000). In this operating point, our prototype performs 4Gop/s (15.4Inference/s on the CIFAR-10 dataset) by computing up to 13binary ops per pJ, achieving 22.8 Inference/s/mW while keeping within a peak power envelope of 674uW - low enough to enable always-on operation in ultra-low power smart cameras, long-lifetime environmental sensors, and insect-sized pico-drones.

Francesco Conti, Pasquale Davide Schiavone, Luca Benini

Binary Neural Networks (BNNs) are promising to deliver accuracy comparable to conventional deep neural networks at a fraction of the cost in terms of memory and energy. In this paper, we introduce the XNOR Neural Engine (XNE), a fully digital configurable hardware accelerator IP for BNNs, integrated within a microcontroller unit (MCU) equipped with an autonomous I/O subsystem and hybrid SRAM / standard cell memory. The XNE is able to fully compute convolutional and dense layers in autonomy or in cooperation with the core in the MCU to realize more complex behaviors. We show post-synthesis results in 65nm and 22nm technology for the XNE IP and post-layout results in 22nm for the full MCU indicating that this system can drop the energy cost per binary operation to 21.6fJ per operation at 0.4V, and at the same time is flexible and performant enough to execute state-of-the-art BNN topologies such as ResNet-34 in less than 2.2mJ per frame at 8.9 fps.

Francesco Conti, Robert Schilling, Pasquale Davide Schiavone et al.

Near-sensor data analytics is a promising direction for IoT endpoints, as it minimizes energy spent on communication and reduces network load - but it also poses security concerns, as valuable data is stored or sent over the network at various stages of the analytics pipeline. Using encryption to protect sensitive data at the boundary of the on-chip analytics engine is a way to address data security issues. To cope with the combined workload of analytics and encryption in a tight power envelope, we propose Fulmine, a System-on-Chip based on a tightly-coupled multi-core cluster augmented with specialized blocks for compute-intensive data processing and encryption functions, supporting software programmability for regular computing tasks. The Fulmine SoC, fabricated in 65nm technology, consumes less than 20mW on average at 0.8V achieving an efficiency of up to 70pJ/B in encryption, 50pJ/px in convolution, or up to 25MIPS/mW in software. As a strong argument for real-life flexible application of our platform, we show experimental results for three secure analytics use cases: secure autonomous aerial surveillance with a state-of-the-art deep CNN consuming 3.16pJ per equivalent RISC op; local CNN-based face detection with secured remote recognition in 5.74pJ/op; and seizure detection with encrypted data collection from EEG within 12.7pJ/op.