Baxi Chong

Juntao He, Baxi Chong, Zhaochen Xu et al.

Navigating rugged landscapes poses significant challenges for legged locomotion. Multi-legged robots (those with 6 and greater) offer a promising solution for such terrains, largely due to their inherent high static stability, resulting from a low center of mass and wide base of support. Such systems require minimal effort to maintain balance. Recent studies have shown that a linear controller, which modulates the vertical body undulation of a multi-legged robot in response to shifts in terrain roughness, can ensure reliable mobility on challenging terrains. However, the potential of a learning-based control framework that adjusts multiple parameters to address terrain heterogeneity remains underexplored. We posit that the development of an experimentally validated physics-based simulator for this robot can rapidly advance capabilities by allowing wide parameter space exploration. Here we develop a MuJoCo-based simulator tailored to this robotic platform and use the simulation to develop a reinforcement learning-based control framework that dynamically adjusts horizontal and vertical body undulation, and limb stepping in real-time. Our approach improves robot performance in simulation, laboratory experiments, and outdoor tests. Notably, our real-world experiments reveal that the learning-based controller achieves a 30\% to 50\% increase in speed compared to a linear controller, which only modulates vertical body waves. We hypothesize that the superior performance of the learning-based controller arises from its ability to adjust multiple parameters simultaneously, including limb stepping, horizontal body wave, and vertical body wave.

Duncan Andrews, Landon Zimmerman, Evan Martin et al.

Unlike their large-scale counterparts, small-scale robots are largely confined to laboratory environments and are rarely deployed in real-world settings. As robot size decreases, robot-terrain interactions fundamentally change; however, there remains a lack of systematic understanding of what sensory information small-scale robots should acquire and how they should respond when traversing complex natural terrains. To address these challenges, we develop a Small-scale, Intelligent, Lizard-inspired, Adaptive Robot (SILA Bot) capable of adapting to diverse substrates. We use granular media of varying depths as a controlled yet representative terrain paradigm. We show that the optimal body movement pattern (ranging from standing-wave bending that assists limb retraction on flat ground to traveling-wave undulation that generates thrust in deep granular media) can be parameterized and approximated as a linear function of granular depth. Furthermore, proprioceptive signals, such as joint torque, provide sufficient information to estimate granular depth via a K-Nearest Neighbors classifier, achieving 95% accuracy. Leveraging these relationships, we design a simple linear feedback controller that modulates body phase and substantially improves locomotion performance on terrains with unknown depth. Together, these results establish a principled framework for perception and control in small-scale locomotion and enable effective terrain-adaptive locomotion while maintaining low computational complexity.

Hangjun Liu, Jiarui Geng, Jinxuan Ding et al.

Centipede-like robots offer unique locomotion advantages due to their small cross-sectional area for accessing confined spaces, and their redundant legs enhance robustness in cluttered environments such as search-and-rescue and pipe inspection. However, elongated robots are particularly vulnerable to tipping over when climbing large obstacles, making reliable self-righting essential for field deployment. Self-righting strategies for elongate, multi-legged systems remain poorly understood. In this study, we conduct a comparative biomechanics and robophysical investigation to address three key questions: (1) What self-righting strategies are effective for elongate, many-legged systems? (2) How should these strategies depend on morphological parameters such as leg length and leg number? (3) Is there a morphological limit beyond which reliable self-righting becomes infeasible? We compare two biological exemplars: Scolopendra subspinipes (short legs) and Scutigera coleoptrata (house centipedes with long legs). Scolopendra subspinipes reliably self-rights both during aerial phases and through ground-assisted self-righting, whereas house centipedes rely predominantly on aerial reorientation and struggle to generate effective self-righting torques during ground contact. Motivated by these observations, we construct a parameterized space of bio-inspired self-righting strategies and develop an elongate robot with adjustable leg lengths. Systematic experiments reveal that increasing leg length necessitates a shift in control strategy to prevent torque over-concentration in mid-body actuators, and we identify a critical limb-length threshold above which robust self-righting becomes challenging. These results establish morphology-strategy coupling principles for self-righting in elongate robots and provide design guidelines for centipede-like systems operating in uncertain terrain.

Tianyu Wang, Baxi Chong, Yuelin Deng et al.

Reorientation (turning in plane) plays a critical role for all robots in any field application, especially those that in confined spaces. While important, reorientation remains a relatively unstudied problem for robots, including limbless mechanisms, often called snake robots. Instead of looking at snakes, we take inspiration from observations of the turning behavior of tiny nematode worms C. elegans. Our previous work presented an in-place and in-plane turning gait for limbless robots, called an omega turn, and prescribed it using a novel two-wave template. In this work, we advance omega turn-inspired controllers in three aspects: 1) we use geometric methods to vary joint angle amplitudes and forward wave spatial frequency in our turning equation to establish a wide and precise amplitude modulation and frequency modulation on omega turn; 2) we use this new relationship to enable robots with fewer internal degrees of freedom (i.e., fewer joints in the body) to achieve desirable performance, and 3) we apply compliant control methods to this relationship to handle unmodelled effects in the environment. We experimentally validate our approach on a limbless robot that the omega turn can produce effective and robust turning motion in various types of environments, such as granular media and rock pile.

Baxi Chong, Yasemin O. Aydin, Jennifer M. Rieser et al.

Serially connected robots are promising candidates for performing tasks in confined spaces such as search-and-rescue in large-scale disasters. Such robots are typically limbless, and we hypothesize that the addition of limbs could improve mobility. However, a challenge in designing and controlling such devices lies in the coordination of high-dimensional redundant modules in a way that improves mobility. Here we develop a general framework to control serially connected multi-legged robots. Specifically, we combine two approaches to build a general shape control scheme which can provide baseline patterns of self-deformation ("gaits") for effective locomotion in diverse robot morphologies. First, we take inspiration from a dimensionality reduction and a biological gait classification scheme to generate cyclic patterns of body deformation and foot lifting/lowering, which facilitate generation of arbitrary substrate contact patterns. Second, we use geometric mechanics methods to facilitates identification of optimal phasing of these undulations to maximize speed and/or stability. Our scheme allows the development of effective gaits in multi-legged robots locomoting on flat frictional terrain with diverse number of limbs (4, 6, 16, and even 0 limbs) and body actuation capabilities (including sidewinding gaits on limbless devices). By properly coordinating the body undulation and the leg placement, our framework combines the advantages of both limbless robots (modularity) and legged robots (mobility). We expect that our framework can provide general control schemes for the rapid deployment of general multi-legged robots, paving the ways toward machines that can traverse complex environments under real-life conditions.

Tianyu Wang, Bo Lin, Baxi Chong et al.

Snake robots composed of alternating single-axis pitch and yaw joints have many internal degrees of freedom, which make them capable of versatile three-dimensional locomotion. In motion planning process, snake robot motions are often designed kinematically by a chronological sequence of continuous backbone curves that capture desired macroscopic shapes of the robot. However, as the geometric arrangement of single-axis rotary joints creates constraints on the rotations in the robot, it is challenging for the robot to reconstruct an arbitrary 3D curve. When the robot configuration does not accurately achieve the desired shapes defined by these backbone curves, the robot can have unexpected contacts with the environment, such that the robot does not achieve the desired motion. In this work, we propose a method for snake robots to reconstruct desired backbone curves by posing an optimization problem that exploits the robot's geometric structure. We verified that our method enables fast and accurate curve-configuration conversions through its applications to commonly used 3D gaits. We also demonstrated via robot experiments that 1) our method results in smooth locomotion on the robot; 2) our method allows the robot to approach the numerically predicted locomotive performance of a sequence of continuous backbone curve.