Linna Xu

Jian Huang, Zixiang Ming, Yongli Zhu et al.

This paper presents a detailed study of how graph neural networks can be used on edge intelligent meters in a microgrid to forecast photovoltaic power generation. The problem background and the adopted technologies are introduced, including ONNX and ONNX Runtime. The hardware and software specifications of the smart meter are also briefly described. Then, the paper focuses on the training and deployment of two graph machine learning models, GCN and GraphSAGE, with particular emphasis on developing and deploying a customized ONNX operator for GCN. Finally, a case study is conducted using real datasets from a village microgrid. The performance of the two models is compared on both the PC and the smart meter, exhibiting successful deployments and executions on the smart meter.

Linna Xu, Yongli Zhu

As a key component of power system production simulation, load forecasting is critical for the stable operation of power systems. Machine learning methods prevail in this field. However, the limited training data can be a challenge. This paper proposes a generative model-assisted approach for load forecasting under small sample scenarios, consisting of two steps: expanding the dataset using a diffusion-based generative model and then training various machine learning regressors on the augmented dataset to identify the best performer. The expanded dataset significantly reduces forecasting errors compared to the original dataset, and the diffusion model outperforms the generative adversarial model by achieving about 200 times smaller errors and better alignment in latent data distributions.

Linna Xu, Yongli Zhu

This paper presents a modified model predictive control (MPC) framework for real-time power system operation. The framework incorporates a diffusion model tailored for time series generation to enhance the accuracy of the load forecasting module used in the system operation. In the absence of explicit state transition law, a model-identification procedure is leveraged to derive the system dynamics, thereby eliminating a barrier when applying MPC to a renewables-dominated power system. Case study results on an industry park system and the IEEE 30-bus system demonstrate that using the diffusion model to augment the training dataset significantly improves load-forecasting accuracy, and the inferred system dynamics are applicable to the real-time grid operation with solar and wind.

Yongli Zhu, Linna Xu, Jian Huang

This paper presents a machine-learning study for solar inverter power regulation in a remote microgrid. Machine learning models for active and reactive power control are respectively trained using an ensemble learning method. Then, unlike conventional schemes that make inferences on a central server in the far-end control center, the proposed scheme deploys the trained models on an embedded edge-computing device near the inverter to reduce the communication delay. Experiments on a real embedded device achieve matched results as on the desktop PC, with about 0.1ms time cost for each inference input.

Jian Huang, Yongli Zhu, Linna Xu et al.

In this paper, an edge-side model training study is conducted on a resource-limited smart meter. The motivation of grid-edge intelligence and the concept of on-device training are introduced. Then, the technical preparation steps for on-device training are described. A case study on the task of photovoltaic power forecasting is presented, where two representative machine learning models are investigated: a gradient boosting tree model and a recurrent neural network model. To adapt to the resource-limited situation in the smart meter, "mixed"- and "reduced"-precision training schemes are also devised. Experiment results demonstrate the feasibility of economically achieving grid-edge intelligence via the existing advanced metering infrastructures.