Brian L. Evans

Faris B. Mismar, Ahmad AlAmmouri, Ahmed Alkhateeb et al.

In cellular systems, the user equipment (UE) can request a change in the frequency band when its rate drops below a threshold on the current band. The UE is then instructed by the base station (BS) to measure the quality of candidate bands, which requires a measurement gap in the data transmission, thus lowering the data rate. We propose an online-learning based band switching approach that does not require any measurement gap. Our proposed classifier-based band switching policy instead exploits spatial and spectral correlation between radio frequency signals in different bands based on knowledge of the UE location. We focus on switching between a lower (e.g., 3.5 GHz) band and a millimeter wave band (e.g., 28 GHz), and design and evaluate two classification models that are trained on a ray-tracing dataset. A key insight is that measurement gaps are overkill, in that only the relative order of the bands is necessary for band selection, rather than a full channel estimate. Our proposed machine learning based policies achieve roughly 30% improvement in mean effective rates over those of the industry standard policy, while achieving misclassification errors well below 0.5% and maintaining resilience against blockage uncertainty.

Faris B. Mismar, Jinseok Choi, Brian L. Evans

Tuning cellular network performance against always occurring wireless impairments can dramatically improve reliability to end users. In this paper, we formulate cellular network performance tuning as a reinforcement learning (RL) problem and provide a solution to improve the performance for indoor and outdoor environments. By leveraging the ability of Q-learning to estimate future performance improvement rewards, we propose two algorithms: (1) closed loop power control (PC) for downlink voice over LTE (VoLTE) and (2) self-organizing network (SON) fault management. The VoLTE PC algorithm uses RL to adjust the indoor base station transmit power so that the signal to interference plus noise ratio (SINR) of a user equipment (UE) meets the target SINR. It does so without the UE having to send power control requests. The SON fault management algorithm uses RL to improve the performance of an outdoor base station cluster by resolving faults in the network through configuration management. Both algorithms exploit measurements from the connected users, wireless impairments, and relevant configuration parameters to solve a non-convex performance optimization problem using RL. Simulation results show that our proposed RL based algorithms outperform the industry standards today in realistic cellular communication environments.

Faris B. Mismar, Brian L. Evans

We propose a reinforcement learning (RL) based closed loop power control algorithm for the downlink of the voice over LTE (VoLTE) radio bearer for an indoor environment served by small cells. The main contributions of our paper are to 1) use RL to solve performance tuning problems in an indoor cellular network for voice bearers and 2) show that our derived lower bound loss in effective signal to interference plus noise ratio due to neighboring cell failure is sufficient for VoLTE power control purposes in practical cellular networks. In our simulation, the proposed RL-based power control algorithm significantly improves both voice retainability and mean opinion score compared to current industry standards. The improvement is due to maintaining an effective downlink signal to interference plus noise ratio against adverse network operational issues and faults.

Faris B. Mismar, Brian L. Evans

We propose an algorithm to automate fault management in an outdoor cellular network using deep reinforcement learning (RL) against wireless impairments. This algorithm enables the cellular network cluster to self-heal by allowing RL to learn how to improve the downlink signal to interference plus noise ratio through exploration and exploitation of various alarm corrective actions. The main contributions of this paper are to 1) introduce a deep RL-based fault handling algorithm which self-organizing networks can implement in a polynomial runtime and 2) show that this fault management method can improve the radio link performance in a realistic network setup. Simulation results show that our proposed algorithm learns an action sequence to clear alarms and improve the performance in the cellular cluster better than existing algorithms, even against the randomness of the network fault occurrences and user movements.

Kyle D. Wesson, Jason N. Gross, Todd E. Humphreys et al.

We propose a simple low-cost technique that enables civil Global Positioning System (GPS) receivers and other civil global navigation satellite system (GNSS) receivers to reliably detect carry-off spoofing and jamming. The technique, which we call the Power-Distortion detector, classifies received signals as interference-free, multipath-afflicted, spoofed, or jammed according to observations of received power and correlation function distortion. It does not depend on external hardware or a network connection and can be readily implemented on many receivers via a firmware update. Crucially, the detector can with high probability distinguish low-power spoofing from ordinary multipath. In testing against over 25 high-quality empirical data sets yielding over 900,000 separate detection tests, the detector correctly alarms on all malicious spoofing or jamming attacks while maintaining a <0.6% single-channel false alarm rate.

Faris B. Mismar, Brian L. Evans

We propose a method for downlink coordinated multipoint (DL CoMP) in heterogeneous fifth generation New Radio (NR) networks. The primary contribution of our paper is an algorithm to enhance the trigger of DL CoMP using online machine learning. We use support vector machine (SVM) classifiers to enhance the user downlink throughput in a realistic frequency division duplex network environment. Our simulation results show improvement in both the macro and pico base station downlink throughputs due to the informed triggering of the multiple radio streams as learned by the SVM classifier.

Marcel Nassar, Philip Schniter, Brian L. Evans

We propose a novel receiver for orthogonal frequency division multiplexing (OFDM) transmissions in impulsive noise environments. Impulsive noise arises in many modern wireless and wireline communication systems, such as Wi-Fi and powerline communications, due to uncoordinated interference that is much stronger than thermal noise. We first show that the bit-error-rate optimal receiver jointly estimates the propagation channel coefficients, the noise impulses, the finite-alphabet symbols, and the unknown bits. We then propose a near-optimal yet computationally tractable approach to this joint estimation problem using loopy belief propagation. In particular, we merge the recently proposed "generalized approximate message passing" (GAMP) algorithm with the forward-backward algorithm and soft-input soft-output decoding using a "turbo" approach. Numerical results indicate that the proposed receiver drastically outperforms existing receivers under impulsive noise and comes within 1 dB of the matched-filter bound. Meanwhile, with N tones, the proposed factor-graph-based receiver has only O(N log N) complexity, and it can be parallelized.

Jing Lin, Marcel Nassar, Brian L. Evans

Additive asynchronous and cyclostationary impulsive noise limits communication performance in OFDM powerline communication (PLC) systems. Conventional OFDM receivers assume additive white Gaussian noise and hence experience degradation in communication performance in impulsive noise. Alternate designs assume a parametric statistical model of impulsive noise and use the model parameters in mitigating impulsive noise. These receivers require overhead in training and parameter estimation, and degrade due to model and parameter mismatch, especially in highly dynamic environments. In this paper, we model impulsive noise as a sparse vector in the time domain without any other assumptions, and apply sparse Bayesian learning methods for estimation and mitigation without training. We propose three iterative algorithms with different complexity vs. performance trade-offs: (1) we utilize the noise projection onto null and pilot tones to estimate and subtract the noise impulses; (2) we add the information in the data tones to perform joint noise estimation and OFDM detection; (3) we embed our algorithm into a decision feedback structure to further enhance the performance of coded systems. When compared to conventional OFDM PLC receivers, the proposed receivers achieve SNR gains of up to 9 dB in coded and 10 dB in uncoded systems in the presence of impulsive noise.