Borivoje Nikolić

Vasuki Narasimha Swamy, Sahaana Suri, Paul Rigge et al. · berkeley

High-performance industrial automation systems rely on tens of simultaneously active sensors and actuators and have stringent communication latency and reliability requirements. Current wireless technologies like WiFi, Bluetooth, and LTE are unable to meet these requirements, forcing the use of wired communication in industrial control systems. This paper introduces a wireless communication protocol that capitalizes on multiuser diversity and cooperative communication to achieve the ultra-reliability with a low-latency constraint. Our protocol is analyzed using the communication-theoretic delay-limited-capacity framework and compared to baseline schemes that primarily exploit frequency diversity. For a scenario inspired by an industrial printing application with thirty nodes in the control loop, 20B messages transmitted between pairs of nodes and a cycle time of $2$ ms, an idealized protocol can achieve a cycle failure probability (probability that any packet in a cycle is not successfully delivered) lower than $10^{-9}$ with nominal SNR below 5 dB in a 20MHz wide channel.

Junsun Choi, Sam Son, Sunjin Choi et al.

Mixture-of-experts (MoE) architectures have turned LLM serving into a cluster-scale workload in which communication consumes a considerable portion of LLM serving runtime. This has prompted industry to invest heavily in expensive high-bandwidth scale-up networks. We question whether such costly infrastructure is strictly necessary. We present the first systematic cross-layer analysis of network cost-effectiveness for MoE LLM serving, comparing four representative XPU (e.g., GPU/TPU) topologies (scale-up, scale-out, 3D torus, and 3D full-mesh). We find that lower-cost switchless topologies are more cost-effective than the scale-up topology across all serving scenarios explored, improving cost-effectiveness by 20.6-56.2%. In particular, the 3D full-mesh topology is Pareto-optimal in terms of the performance-cost tradeoff. We also find that current scale-up link bandwidths are over-provisioned: reducing the link bandwidth improves throughput per cost by up to 27%. A forward-looking analysis of upcoming GPU generations indicates that the cost-performance advantage of switchless networks will likely persist.

Angela Cui, Ferran Hermida-Rivera, Jack Toubes et al.

Agentic artificial intelligence shows great promise for radically improving the pace of innovation in hardware/software co-design research across computer architecture, systems, compilers, and VLSI. Thus far, however, applications of AI in these contexts have generally been demonstrated in isolated settings on small-scale problems, due to the difficulty of designing and deploying complex AI-infused hardware and software development workflows. This paper introduces CHIA, an open-source hardware/software co-design framework for agile and principled research on the application of AI to co-design. CHIA treats the productive construction and scalable deployment of the co-design flow itself as a first-class objective. In CHIA, agentic AI-driven hardware and software design flows are expressed as \textit{CHIA loops}: directed cyclic graphs whose nodes execute various system-on-chip design tools, microarchitectural simulators, software build systems, AI models, evolutionary coding agents, and more. The \textit{CHIA library} provides node implementations for many popular tools, including Chipyard, gem5, ChampSim, FireSim, Hammer (thus several commercial ASIC CAD tools), Vivado, AlphaEvolve, AdaEvolve, and many others. CHIA also provides a broad set of features to conduct principled science around these flows. These include isolation between AI models and hardware tools, profiling mechanisms, fault-tolerant execution, and reliability at scale across hundreds of heterogeneous systems (CPUs, FPGAs, GPUs, etc., across public cloud/on-prem.). To showcase CHIA, we present five CHIA loops as case studies: (1) automatic RTL-to-gem5 simulator alignment, (2) LLM-driven implementation of microarchitectural features in RTL, (3) agentic, IPC-aware critical path optimization, (4) evolutionary architectural discovery, and (5) maintainer-friendly agentic GitHub issue fixing.

Raghav Gupta, Akanksha Jain, Abraham Gonzalez et al.

Agile hardware design flows are a critically needed force multiplier to meet the exploding demand for compute. Recently, agentic generative AI systems have demonstrated significant advances in algorithm design, improving code efficiency, and enabling discovery across scientific domains. Bridging these worlds, we present ArchAgent, an automated computer architecture discovery system built on AlphaEvolve. We show ArchAgent's ability to automatically design/implement state-of-the-art (SoTA) cache replacement policies (architecting new mechanisms/logic, not only changing parameters), broadly within the confines of an established cache replacement policy design competition. In two days without human intervention, ArchAgent generated a policy achieving a 5.3% IPC speedup improvement over the prior SoTA on public multi-core Google Workload Traces. On the heavily-explored single-core SPEC06 workloads, it generated a policy in just 18 days showing a 0.9% IPC speedup improvement over the existing SoTA (a similar "winning margin" as reported by the existing SoTA). ArchAgent achieved these gains 3-5x faster than prior human-developed SoTA policies. Agentic flows also enable "post-silicon hyperspecialization" where agents tune runtime-configurable parameters exposed in hardware policies to further align the policies with a specific workload (mix). Exploiting this, we demonstrate a 2.4% IPC speedup improvement over prior SoTA on SPEC06 workloads. Finally, we outline broader implications for computer architecture research in the era of agentic AI. For example, we demonstrate the phenomenon of "simulator escapes", where the agentic AI flow discovered and exploited a loophole in a popular microarchitectural simulator - a consequence of the fact that these research tools were designed for a (now past) world where they were exclusively operated by humans acting in good-faith.

Felicia B. Guo, Ken T. Ho, Andrei Vladimirescu et al.

Analog and mixed-signal (AMS) integrated circuits (ICs) lie at the core of modern computing and communications systems. However, despite the continued rise in design complexity, advances in AMS automation remain limited. This reflects the central challenge in developing a generalized optimization method applicable across diverse circuit design spaces, many of which are distinct, constrained, and non-differentiable. To address this, our work casts circuit design as a graph generation problem and introduces a novel method of AMS synthesis driven by deep reinforcement learning (AstRL). Based on a policy-gradient approach, AstRL generates circuits directly optimized for user-specified targets within a simulator-embedded environment that provides ground-truth feedback during training. Through behavioral-cloning and discriminator-based similarity rewards, our method demonstrates, for the first time, an expert-aligned paradigm for generalized circuit generation validated in simulation. Importantly, the proposed approach operates at the level of individual transistors, enabling highly expressive, fine-grained topology generation. Strong inductive biases encoded in the action space and environment further drive structurally consistent and valid generation. Experimental results for three realistic design tasks illustrate substantial improvements in conventional design metrics over state-of-the-art baselines, with 100% of generated designs being structurally correct and over 90% demonstrating required functionality.

Hasan Genc, Seah Kim, Alon Amid et al.

DNN accelerators are often developed and evaluated in isolation without considering the cross-stack, system-level effects in real-world environments. This makes it difficult to appreciate the impact of System-on-Chip (SoC) resource contention, OS overheads, and programming-stack inefficiencies on overall performance/energy-efficiency. To address this challenge, we present Gemmini, an open-source*, full-stack DNN accelerator generator. Gemmini generates a wide design-space of efficient ASIC accelerators from a flexible architectural template, together with flexible programming stacks and full SoCs with shared resources that capture system-level effects. Gemmini-generated accelerators have also been fabricated, delivering up to three orders-of-magnitude speedups over high-performance CPUs on various DNN benchmarks. * https://github.com/ucb-bar/gemmini

Seah Kim, Hasan Genc, Vadim Vadimovich Nikiforov et al.

Driven by the wide adoption of deep neural networks (DNNs) across different application domains, multi-tenancy execution, where multiple DNNs are deployed simultaneously on the same hardware, has been proposed to satisfy the latency requirements of different applications while improving the overall system utilization. However, multi-tenancy execution could lead to undesired system-level resource contention, causing quality-of-service (QoS) degradation for latency-critical applications. To address this challenge, we propose MoCA, an adaptive multi-tenancy system for DNN accelerators. Unlike existing solutions that focus on compute resource partition, MoCA dynamically manages shared memory resources of co-located applications to meet their QoS targets. Specifically, MoCA leverages the regularities in both DNN operators and accelerators to dynamically modulate memory access rates based on their latency targets and user-defined priorities so that co-located applications get the resources they demand without significantly starving their co-runners. We demonstrate that MoCA improves the satisfaction rate of the service level agreement (SLA) up to 3.9x (1.8x average), system throughput by 2.3x (1.7x average), and fairness by 1.3x (1.2x average), compared to prior work.