Blesson Varghese

Bailey J. Eccles, Philip Rodgers, Peter Kilpatrick et al.

Deep neural networks (DNNs) underpin many machine learning applications. Production quality DNN models achieve high inference accuracy by training millions of DNN parameters which has a significant resource footprint. This presents a challenge for resources operating at the extreme edge of the network, such as mobile and embedded devices that have limited computational and memory resources. To address this, models are pruned to create lightweight, more suitable variants for these devices. Existing pruning methods are unable to provide similar quality models compared to their unpruned counterparts without significant time costs and overheads or are limited to offline use cases. Our work rapidly derives suitable model variants while maintaining the accuracy of the original model. The model variants can be swapped quickly when system and network conditions change to match workload demand. This paper presents DNNShifter, an end-to-end DNN training, spatial pruning, and model switching system that addresses the challenges mentioned above. At the heart of DNNShifter is a novel methodology that prunes sparse models using structured pruning. The pruned model variants generated by DNNShifter are smaller in size and thus faster than dense and sparse model predecessors, making them suitable for inference at the edge while retaining near similar accuracy as of the original dense model. DNNShifter generates a portfolio of model variants that can be swiftly interchanged depending on operational conditions. DNNShifter produces pruned model variants up to 93x faster than conventional training methods. Compared to sparse models, the pruned model variants are up to 5.14x smaller and have a 1.67x inference latency speedup, with no compromise to sparse model accuracy. In addition, DNNShifter has up to 11.9x lower overhead for switching models and up to 3.8x lower memory utilisation than existing approaches.

Zihan Zhang, Philip Rodgers, Peter Kilpatrick et al.

Collaborative machine learning (CML) techniques, such as federated learning, have been proposed to train deep learning models across multiple mobile devices and a server. CML techniques are privacy-preserving as a local model that is trained on each device instead of the raw data from the device is shared with the server. However, CML training is inefficient due to low resource utilization. We identify idling resources on the server and devices due to sequential computation and communication as the principal cause of low resource utilization. A novel framework PiPar that leverages pipeline parallelism for CML techniques is developed to substantially improve resource utilization. A new training pipeline is designed to parallelize the computations on different hardware resources and communication on different bandwidth resources, thereby accelerating the training process in CML. A low overhead automated parameter selection method is proposed to optimize the pipeline, maximizing the utilization of available resources. The experimental results confirm the validity of the underlying approach of PiPar and highlight that when compared to federated learning: (i) the idle time of the server can be reduced by up to 64.1x, and (ii) the overall training time can be accelerated by up to 34.6x under varying network conditions for a collection of six small and large popular deep neural networks and four datasets without sacrificing accuracy. It is also experimentally demonstrated that PiPar achieves performance benefits when incorporating differential privacy methods and operating in environments with heterogeneous devices and changing bandwidths.

JunKyu Lee, Blesson Varghese, Hans Vandierendonck

This paper analyzes the effects of dynamically varying video contents and detection latency on the real-time detection accuracy of a detector and proposes a new run-time accuracy variation model, ROMA, based on the findings from the analysis. ROMA is designed to select an optimal detector out of a set of detectors in real time without label information to maximize real-time object detection accuracy. ROMA utilizing four YOLOv4 detectors on an NVIDIA Jetson Nano shows real-time accuracy improvements by 4 to 37% for a scenario of dynamically varying video contents and detection latency consisting of MOT17Det and MOT20Det datasets, compared to individual YOLOv4 detectors and two state-of-the-art runtime techniques.

Ayesha Abdul Majeed, Peter Kilpatrick, Ivor Spence et al.

Partitioning and deploying Deep Neural Networks (DNNs) across edge nodes may be used to meet performance objectives of applications. However, the failure of a single node may result in cascading failures that will adversely impact the delivery of the service and will result in failure to meet specific objectives. The impact of these failures needs to be minimised at runtime. Three techniques are explored in this paper, namely repartitioning, early-exit and skip-connection. When an edge node fails, the repartitioning technique will repartition and redeploy the DNN thus avoiding the failed nodes. The early-exit technique makes provision for a request to exit (early) before the failed node. The skip connection technique dynamically routes the request by skipping the failed nodes. This paper will leverage trade-offs in accuracy, end-to-end latency and downtime for selecting the best technique given user-defined objectives (accuracy, latency and downtime thresholds) when an edge node fails. To this end, CONTINUER is developed. Two key activities of the framework are estimating the accuracy and latency when using the techniques for distributed DNNs and selecting the best technique. It is demonstrated on a lab-based experimental testbed that CONTINUER estimates accuracy and latency when using the techniques with no more than an average error of 0.28% and 13.06%, respectively and selects the suitable technique with a low overhead of no more than 16.82 milliseconds and an accuracy of up to 99.86%.

Yizhou Han, Di Wu, Blesson Varghese

In real-world Federated Learning (FL) deployments, data distributions on devices that participate in training evolve over time. This leads to asynchronous data drift, where different devices shift at different times and toward different distributions. Mitigating such drift is challenging: frequent retraining incurs high computational cost on resource-constrained devices, while infrequent retraining degrades performance on drifting devices. We propose DriftGuard, a federated continual learning framework that efficiently adapts to asynchronous data drift. DriftGuard adopts a Mixture-of-Experts (MoE) inspired architecture that separates shared parameters, which capture globally transferable knowledge, from local parameters that adapt to group-specific distributions. This design enables two complementary retraining strategies: (i) global retraining, which updates the shared parameters when system-wide drift is identified, and (ii) group retraining, which selectively updates local parameters for clusters of devices identified via MoE gating patterns, without sharing raw data. Experiments across multiple datasets and models show that DriftGuard matches or exceeds state-of-the-art accuracy while reducing total retraining cost by up to 83%. As a result, it achieves the highest accuracy per unit retraining cost, improving over the strongest baseline by up to 2.3x. DriftGuard is available for download from https://github.com/blessonvar/DriftGuard.

Bailey J. Eccles, Leon Wong, Blesson Varghese

Extensive compute and memory requirements limit the deployment of large language models (LLMs) on any hardware. Compression methods, such as pruning, can reduce model size, which in turn reduces resource requirements. State-of-the-art pruning is based on coarse-grained methods. They are time-consuming and inherently remove critical model parameters, adversely impacting the quality of the pruned model. This paper introduces projection pruning, a novel fine-grained method for pruning LLMs. In addition, LLM projection pruning is enhanced by a new approach we refer to as composite projection pruning - the synergistic combination of unstructured pruning that retains accuracy and structured pruning that reduces model size. We develop Mosaic, a novel system to create and deploy pruned LLMs using composite projection pruning. Mosaic is evaluated using a range of performance and quality metrics on multiple hardware platforms, LLMs, and datasets. Mosaic is 7.19x faster in producing models than existing approaches. Mosaic models achieve up to 84.2% lower perplexity and 31.4% higher accuracy than models obtained from coarse-grained pruning. Up to 67% faster inference and 68% lower GPU memory use is noted for Mosaic models. Mosaic is available for public use from https://github.com/blessonvar/Mosaic

Rehmat Ullah, Di Wu, Paul Harvey et al.

Federated learning (FL) is a privacy-preserving distributed machine learning technique that trains models while keeping all the original data generated on devices locally. Since devices may be resource constrained, offloading can be used to improve FL performance by transferring computational workload from devices to edge servers. However, due to mobility, devices participating in FL may leave the network during training and need to connect to a different edge server. This is challenging because the offloaded computations from edge server need to be migrated. In line with this assertion, we present FedFly, which is, to the best of our knowledge, the first work to migrate a deep neural network (DNN) when devices move between edge servers during FL training. Our empirical results on the CIFAR10 dataset, with both balanced and imbalanced data distribution, support our claims that FedFly can reduce training time by up to 33% when a device moves after 50% of the training is completed, and by up to 45% when 90% of the training is completed when compared to state-of-the-art offloading approach in FL. FedFly has negligible overhead of up to two seconds and does not compromise accuracy. Finally, we highlight a number of open research issues for further investigation. FedFly can be downloaded from https://github.com/qub-blesson/FedFly.

Luke Lockhart, Paul Harvey, Pierre Imai et al.

Partitioning and distributing deep neural networks (DNNs) across end-devices, edge resources and the cloud has a potential twofold advantage: preserving privacy of the input data, and reducing the ingress bandwidth demand beyond the edge. However, for a given DNN, identifying the optimal partition configuration for distributing the DNN that maximizes performance is a significant challenge. This is because the combination of potential target hardware resources that maximizes performance and the sequence of layers of the DNN that should be distributed across the target resources needs to be determined, while accounting for user-defined objectives/constraints for partitioning. This paper presents Scission, a tool for automated benchmarking of DNNs on a given set of target device, edge and cloud resources for determining optimal partitions that maximize DNN performance. The decision-making approach is context-aware by capitalizing on hardware capabilities of the target resources, their locality, the characteristics of DNN layers, and the network condition. Experimental studies are carried out on 18 DNNs. The decisions made by Scission cannot be manually made by a human given the complexity and the number of dimensions affecting the search space. The benchmarking overheads of Scission allow for responding to operational changes periodically rather than in real-time. Scission is available for public download at https://github.com/qub-blesson/Scission.

Ishan Patel, Blesson Varghese, Adam Barker

Large-scale ad hoc analytics of genomic data is popular using the R-programming language supported by 671 software packages provided by Bioconductor. More recently, analytical jobs are benefitting from on-demand computing and storage, their scalability and their low maintenance cost, all of which are offered by the cloud. While Biologists and Bioinformaticists can take an analytical job and execute it on their personal workstations, it remains challenging to seamlessly execute the job on the cloud infrastructure without extensive knowledge of the cloud dashboard. How analytical jobs can not only with minimum effort be executed on the cloud, but also how both the resources and data required by the job can be managed is explored in this paper. An open-source light-weight framework for executing R-scripts using Bioconductor packages, referred to as `RBioCloud', is designed and developed. RBioCloud offers a set of simple command-line tools for managing the cloud resources, the data and the execution of the job. Three biological test cases validate the feasibility of RBioCloud. The framework is publicly available from http://www.rbiocloud.com.

Jiawei Luo, Di Wu, Simon Dobson et al.

Modern edge applications increasingly require multi-DNN inference systems to execute tasks on heterogeneous processors, gaining performance from both concurrent execution and from matching each model to the most suited accelerator. However, existing systems support only a single model (or a few sparse variants) per task, which impedes the efficiency of this matching and results in high Service Level Objective violation rates. We introduce model stitching for multi-DNN inference systems, which creates model variants by recombining subgraphs from sparse models without re-training. We present a demonstrator system, SparseLoom, that shows model stitching can be deployed to SoCs. We show experimentally that SparseLoom reduces SLO violation rates by up to 74%, improves throughput by up to 2.31x, and lowers memory overhead by an average of 28% compared to state-of-the-art multi-DNN inference systems.

Bailey J. Eccles, Leon Wong, Blesson Varghese

Edge machine learning (ML) enables localized processing of data on devices and is underpinned by deep neural networks (DNNs). However, DNNs cannot be easily run on devices due to their substantial computing, memory and energy requirements for delivering performance that is comparable to cloud-based ML. Therefore, model compression techniques, such as pruning, have been considered. Existing pruning methods are problematic for edge ML since they: (1) Create compressed models that have limited runtime performance benefits (using unstructured pruning) or compromise the final model accuracy (using structured pruning), and (2) Require substantial compute resources and time for identifying a suitable compressed DNN model (using neural architecture search). In this paper, we explore a new avenue, referred to as Pruning-at-Initialization (PaI), using structured pruning to mitigate the above problems. We develop Reconvene, a system for rapidly generating pruned models suited for edge deployments using structured PaI. Reconvene systematically identifies and prunes DNN convolution layers that are least sensitive to structured pruning. Reconvene rapidly creates pruned DNNs within seconds that are up to 16.21x smaller and 2x faster while maintaining the same accuracy as an unstructured PaI counterpart.

Dhananjay Saikumar, Blesson Varghese

Modern deep neural networks (DNNs) consist of millions of parameters, necessitating high-performance computing during training and inference. Pruning is one solution that significantly reduces the space and time complexities of DNNs. Traditional pruning methods that are applied post-training focus on streamlining inference, but there are recent efforts to leverage sparsity early on by pruning before training. Pruning methods, such as iterative magnitude-based pruning (IMP) achieve up to a 90% parameter reduction while retaining accuracy comparable to the original model. However, this leads to impractical runtime as it relies on multiple train-prune-reset cycles to identify and eliminate redundant parameters. In contrast, training agnostic early pruning methods, such as SNIP and SynFlow offer fast pruning but fall short of the accuracy achieved by IMP at high sparsities. To bridge this gap, we present Dual Gradient-Based Rapid Iterative Pruning (DRIVE), which leverages dense training for initial epochs to counteract the randomness inherent at the initialization. Subsequently, it employs a unique dual gradient-based metric for parameter ranking. It has been experimentally demonstrated for VGG and ResNet architectures on CIFAR-10/100 and Tiny ImageNet, and ResNet on ImageNet that DRIVE consistently has superior performance over other training-agnostic early pruning methods in accuracy. Notably, DRIVE is 43$\times$ to 869$\times$ faster than IMP for pruning.

Dhananjay Saikumar, Blesson Varghese

Efficient on-device Convolutional Neural Network (CNN) training in resource-constrained mobile and edge environments is an open challenge. Backpropagation is the standard approach adopted, but it is GPU memory intensive due to its strong inter-layer dependencies that demand intermediate activations across the entire CNN model to be retained in GPU memory. This necessitates smaller batch sizes to make training possible within the available GPU memory budget, but in turn, results in substantially high and impractical training time. We introduce NeuroFlux, a novel CNN training system tailored for memory-constrained scenarios. We develop two novel opportunities: firstly, adaptive auxiliary networks that employ a variable number of filters to reduce GPU memory usage, and secondly, block-specific adaptive batch sizes, which not only cater to the GPU memory constraints but also accelerate the training process. NeuroFlux segments a CNN into blocks based on GPU memory usage and further attaches an auxiliary network to each layer in these blocks. This disrupts the typical layer dependencies under a new training paradigm - $\textit{`adaptive local learning'}$. Moreover, NeuroFlux adeptly caches intermediate activations, eliminating redundant forward passes over previously trained blocks, further accelerating the training process. The results are twofold when compared to Backpropagation: on various hardware platforms, NeuroFlux demonstrates training speed-ups of 2.3$\times$ to 6.1$\times$ under stringent GPU memory budgets, and NeuroFlux generates streamlined models that have 10.9$\times$ to 29.4$\times$ fewer parameters.

Zihan Zhang, Leon Wong, Blesson Varghese

A Federated Learning (FL) system collaboratively trains neural networks across devices and a server but is limited by significant on-device computation costs. Split Federated Learning (SFL) systems mitigate this by offloading a block of layers of the network from the device to a server. However, in doing so, it introduces large communication overheads due to frequent exchanges of intermediate activations and gradients between devices and the server and reduces model accuracy for non-IID data. We propose Ampere, a novel collaborative training system that simultaneously minimizes on-device computation and device-server communication while improving model accuracy. Unlike SFL, which uses a global loss by iterative end-to-end training, Ampere develops unidirectional inter-block training to sequentially train the device and server block with a local loss, eliminating the transfer of gradients. A lightweight auxiliary network generation method decouples training between the device and server, reducing frequent intermediate exchanges to a single transfer, which significantly reduces the communication overhead. Ampere mitigates the impact of data heterogeneity by consolidating activations generated by the trained device block to train the server block, in contrast to SFL, which trains on device-specific, non-IID activations. Extensive experiments on multiple CNNs and transformers show that, compared to state-of-the-art SFL baseline systems, Ampere (i) improves model accuracy by up to 13.26% while reducing training time by up to 94.6%, (ii) reduces device-server communication overhead by up to 99.1% and on-device computation by up to 93.13%, and (iii) reduces standard deviation of accuracy by 53.39% for various non-IID degrees highlighting superior performance when faced with heterogeneous data.

Di Wu, Weibo He, Wanglei Feng et al.

Federated Learning (FL) trains machine learning models on edge devices with distributed data. However, the computational and memory limitations of these devices restrict the training of large models using FL. Split Federated Learning (SFL) addresses this challenge by distributing the model across the device and server, but it introduces a tightly coupled data flow, leading to computational bottlenecks and high communication costs. We propose EMO as a solution to enable the training of large models in FL while mitigating the challenges of SFL. EMO introduces Edge Model Overlay(s) between the device and server, enabling the creation of a larger ensemble model without modifying the FL workflow. The key innovation in EMO is Augmented Federated Learning (AFL), which builds an ensemble model by connecting the original (smaller) FL model with model(s) trained in the overlay(s) to facilitate horizontal or vertical scaling. This is accomplished through three key modules: a hierarchical activation replay cache to decouple AFL from FL, a convergence-aware communication controller to optimize communication overhead, and an ensemble inference module. Evaluations on a real-world prototype show that EMO improves accuracy by up to 17.77% compared to FL, and reduces communication costs by up to 7.17x and decreases training time by up to 6.9x compared to SFL.

Zihan Zhang, Leon Wong, Blesson Varghese

Federated learning (FL) systems facilitate distributed machine learning across a server and multiple devices. However, FL systems have low resource utilization limiting their practical use in the real world. This inefficiency primarily arises from two types of idle time: (i) task dependency between the server and devices, and (ii) stragglers among heterogeneous devices. This paper introduces FedOptima, a resource-optimized FL system designed to simultaneously minimize both types of idle time; existing systems do not eliminate or reduce both at the same time. FedOptima offloads the training of certain layers of a neural network from a device to server using three innovations. First, devices operate independently of each other using asynchronous aggregation to eliminate straggler effects, and independently of the server by utilizing auxiliary networks to minimize idle time caused by task dependency. Second, the server performs centralized training using a task scheduler that ensures balanced contributions from all devices, improving model accuracy. Third, an efficient memory management mechanism on the server increases scalability of the number of participating devices. Four state-of-the-art offloading-based and asynchronous FL methods are chosen as baselines. Experimental results show that compared to the best results of the baselines on convolutional neural networks and transformers on multiple lab-based testbeds, FedOptima (i) achieves higher or comparable accuracy, (ii) accelerates training by 1.9x to 21.8x, (iii) reduces server and device idle time by up to 93.9% and 81.8%, respectively, and (iv) increases throughput by 1.1x to 2.0x.

Dhananjay Saikumar, Blesson Varghese

Neural network pruning is essential for reducing model complexity to enable deployment on resource constrained hardware. While performance loss of pruned networks is often attributed to the removal of critical parameters, we identify signal collapse a reduction in activation variance across layers as the root cause. Existing one shot pruning methods focus on weight selection strategies and rely on computationally expensive second order approximations. In contrast, we demonstrate that mitigating signal collapse, rather than optimizing weight selection, is key to improving accuracy of pruned networks. We propose REFLOW that addresses signal collapse without updating trainable weights, revealing high quality sparse sub networks within the original parameter space. REFLOW enables magnitude pruning to achieve state of the art performance, restoring ResNeXt101 accuracy from under 4.1% to 78.9% on ImageNet with only 20% of the weights retained, surpassing state of the art approaches.

Aaron Yi Ding, Ella Peltonen, Tobias Meuser et al.

Based on the collective input of Dagstuhl Seminar (21342), this paper presents a comprehensive discussion on AI methods and capabilities in the context of edge computing, referred as Edge AI. In a nutshell, we envision Edge AI to provide adaptation for data-driven applications, enhance network and radio access, and allow the creation, optimization, and deployment of distributed AI/ML pipelines with given quality of experience, trust, security and privacy targets. The Edge AI community investigates novel ML methods for the edge computing environment, spanning multiple sub-fields of computer science, engineering and ICT. The goal is to share an envisioned roadmap that can bring together key actors and enablers to further advance the domain of Edge AI.

Kevin Wallis, Christoph Reich, Blesson Varghese et al.

Distributed machine learning algorithms that employ Deep Neural Networks (DNNs) are widely used in Industry 4.0 applications, such as smart manufacturing. The layers of a DNN can be mapped onto different nodes located in the cloud, edge and shop floor for preserving privacy. The quality of the data that is fed into and processed through the DNN is of utmost importance for critical tasks, such as inspection and quality control. Distributed Data Validation Networks (DDVNs) are used to validate the quality of the data. However, they are prone to single points of failure when an attack occurs. This paper proposes QUDOS, an approach that enhances the security of a distributed DNN that is supported by DDVNs using quorums. The proposed approach allows individual nodes that are corrupted due to an attack to be detected or excluded when the DNN produces an output. Metrics such as corruption factor and success probability of an attack are considered for evaluating the security aspects of DNNs. A simulation study demonstrates that if the number of corrupted nodes is less than a given threshold for decision-making in a quorum, the QUDOS approach always prevents attacks. Furthermore, the study shows that increasing the size of the quorum has a better impact on security than increasing the number of layers. One merit of QUDOS is that it enhances the security of DNNs without requiring any modifications to the algorithm and can therefore be applied to other classes of problems.

Di Wu, Rehmat Ullah, Paul Harvey et al.

Applying Federated Learning (FL) on Internet-of-Things devices is necessitated by the large volumes of data they produce and growing concerns of data privacy. However, there are three challenges that need to be addressed to make FL efficient: (i) execution on devices with limited computational capabilities, (ii) accounting for stragglers due to computational heterogeneity of devices, and (iii) adaptation to the changing network bandwidths. This paper presents FedAdapt, an adaptive offloading FL framework to mitigate the aforementioned challenges. FedAdapt accelerates local training in computationally constrained devices by leveraging layer offloading of deep neural networks (DNNs) to servers. Further, FedAdapt adopts reinforcement learning based optimization and clustering to adaptively identify which layers of the DNN should be offloaded for each individual device on to a server to tackle the challenges of computational heterogeneity and changing network bandwidth. Experimental studies are carried out on a lab-based testbed and it is demonstrated that by offloading a DNN from the device to the server FedAdapt reduces the training time of a typical IoT device by over half compared to classic FL. The training time of extreme stragglers and the overall training time can be reduced by up to 57%. Furthermore, with changing network bandwidth, FedAdapt is demonstrated to reduce the training time by up to 40% when compared to classic FL, without sacrificing accuracy.

Hyunho Ahn, Munkyu Lee, Cheol-Ho Hong et al.

Industrial Internet of Things (IIoT) applications can benefit from leveraging edge computing. For example, applications underpinned by deep neural networks (DNN) models can be sliced and distributed across the IIoT device and the edge of the network for improving the overall performance of inference and for enhancing privacy of the input data, such as industrial product images. However, low network performance between IIoT devices and the edge is often a bottleneck. In this study, we develop ScissionLite, a holistic framework for accelerating distributed DNN inference using the Transfer Layer (TL). The TL is a traffic-aware layer inserted between the optimal slicing point of a DNN model slice in order to decrease the outbound network traffic without a significant accuracy drop. For the TL, we implement a new lightweight down/upsampling network for performance-limited IIoT devices. In ScissionLite, we develop ScissionTL, the Preprocessor, and the Offloader for end-to-end activities for deploying DNN slices with the TL. They decide the optimal slicing point of the DNN, prepare pre-trained DNN slices including the TL, and execute the DNN slices on an IIoT device and the edge. Employing the TL for the sliced DNN models has a negligible overhead. ScissionLite improves the inference latency by up to 16 and 2.8 times when compared to execution on the local device and an existing state-of-the-art model slicing approach respectively.

Francis McNamee, Schahram Dustadar, Peter Kilpatrick et al.

Edge computing offers an additional layer of compute infrastructure closer to the data source before raw data from privacy-sensitive and performance-critical applications is transferred to a cloud data center. Deep Neural Networks (DNNs) are one class of applications that are reported to benefit from collaboratively computing between the edge and the cloud. A DNN is partitioned such that specific layers of the DNN are deployed onto the edge and the cloud to meet performance and privacy objectives. However, there is limited understanding of: (a) whether and how evolving operational conditions (increased CPU and memory utilization at the edge or reduced data transfer rates between the edge and the cloud) affect the performance of already deployed DNNs, and (b) whether a new partition configuration is required to maximize performance. A DNN that adapts to changing operational conditions is referred to as an 'adaptive DNN'. This paper investigates whether there is a case for adaptive DNNs in edge computing by considering three questions: (i) Are DNNs sensitive to operational conditions? (ii) How sensitive are DNNs to operational conditions? (iii) Do individual or a combination of operational conditions equally affect DNNs? (iv) Is DNN partitioning sensitive to hardware architectures on the cloud/edge? The exploration is carried out in the context of 8 pre-trained DNN models and the results presented are from analyzing nearly 8 million data points. The results highlight that network conditions affects DNN performance more than CPU or memory related operational conditions. Repartitioning is noted to provide a performance gain in a number of cases, but a specific trend was not noted in relation to its correlation to the underlying hardware architecture. Nonetheless, the need for adaptive DNNs is confirmed.

Adam Barker, Blesson Varghese, Long Thai

A Cloud Services Brokerage (CSB) acts as an intermediary between cloud service providers (e.g., Amazon and Google) and cloud service end users, providing a number of value adding services. CSBs as a research topic are in there infancy. The goal of this paper is to provide a concise survey of existing CSB technologies in a variety of areas and highlight a roadmap, which details five future opportunities for research.

Blesson Varghese, Gerard McKee

The work reported in this paper is motivated towards the development of a mathematical model for swarm systems based on macroscopic primitives. A pattern formation and transformation model is proposed. The pattern transformation model comprises two general methods for pattern transformation, namely a macroscopic transformation and mathematical transformation method. The problem of transformation is formally expressed and four special cases of transformation are considered. Simulations to confirm the feasibility of the proposed models and transformation methods are presented. Comparison between the two transformation methods is also reported.

Ishan Patel, Andrew Rau-Chaplin, Blesson Varghese

This paper addresses how the benefits of cloud-based infrastructure can be harnessed for analytical workloads. Often the software handling analytical workloads is not developed by a professional programmer, but on an ad hoc basis by Analysts in high-level programming environments such as R or Matlab. The goal of this research is to allow Analysts to take an analytical job that executes on their personal workstations, and with minimum effort execute it on cloud infrastructure and manage both the resources and the data required by the job. If this can be facilitated gracefully, then the Analyst benefits from on-demand resources, low maintenance cost and scalability of computing resources, all of which are offered by the cloud. In this paper, a Platform for Parallel R-based Analytics on the Cloud (P2RAC) that is placed between an Analyst and a cloud infrastructure is proposed and implemented. P2RAC offers a set of command-line tools for managing the resources, such as instances and clusters, the data and the execution of the software on the Amazon Elastic Computing Cloud infrastructure. Experimental studies are pursued using two parallel problems and the results obtained confirm the feasibility of employing P2RAC for solving large-scale analytical problems on the cloud.

Vu Dung Nguyen, Blesson Varghese, Adam Barker

Analysis of information retrieved from microblogging services such as Twitter can provide valuable insight into public sentiment in a geographic region. This insight can be enriched by visualising information in its geographic context. Two underlying approaches for sentiment analysis are dictionary-based and machine learning. The former is popular for public sentiment analysis, and the latter has found limited use for aggregating public sentiment from Twitter data. The research presented in this paper aims to extend the machine learning approach for aggregating public sentiment. To this end, a framework for analysing and visualising public sentiment from a Twitter corpus is developed. A dictionary-based approach and a machine learning approach are implemented within the framework and compared using one UK case study, namely the royal birth of 2013. The case study validates the feasibility of the framework for analysis and rapid visualisation. One observation is that there is good correlation between the results produced by the popular dictionary-based approach and the machine learning approach when large volumes of tweets are analysed. However, for rapid analysis to be possible faster methods need to be developed using big data techniques and parallel methods.