Meysam Basiri

Nivand Khosravi, Meysam Basiri, Rodrigo Ventura

Accurate relative positioning is crucial for swarm aerial robotics, enabling coordinated flight and collision avoidance. Although vision-based tracking has been extensively studied, 3D LiDAR-based methods remain underutilized despite their robustness under varying lighting conditions. Existing systems often rely on bulky, power-intensive sensors, making them impractical for small UAVs with strict payload and energy constraints. This paper presents a lightweight LiDAR-based UAV tracking system incorporating an Adaptive Extended Kalman Filter (AEKF) framework. Our approach effectively addresses the challenges posed by sparse, noisy, and nonuniform point cloud data generated by non-repetitive scanning 3D LiDARs, ensuring reliable tracking while remaining suitable for small drones with strict payload constraints. Unlike conventional filtering techniques, the proposed method dynamically adjusts the noise covariance matrices using innovation and residual statistics, thereby enhancing tracking accuracy under real-world conditions. Additionally, a recovery mechanism ensures continuity of tracking during temporary detection failures caused by scattered LiDAR returns or occlusions. Experimental validation was performed using a Livox Mid-360 LiDAR mounted on a DJI F550 UAV in real-world flight scenarios. The proposed method demonstrated robust UAV tracking performance under sparse LiDAR returns and intermittent detections, consistently outperforming both standard Kalman filtering and particle filtering approaches during aggressive maneuvers. These results confirm that the framework enables reliable relative positioning in GPS-denied environments without the need for multi-sensor arrays or external infrastructure.

John Lewis, Meysam Basiri, Pedro U. Lima

Robotic exploration in large-scale environments is computationally demanding due to the high overhead of processing extensive frontiers. This article presents an OctoMap-based frontier exploration algorithm with predictable, asymptotically bounded performance. Unlike conventional methods whose complexity scales with environment size, our approach maintains a complexity of $\mathcal{O}(|\mathcal{F}|)$, where $|\mathcal{F}|$ is the number of frontiers. This is achieved through strategic forward and inverse sensor modeling, which enables approximate yet efficient frontier detection and maintenance. To further enhance performance, we integrate a Bayesian regressor to estimate information gain, circumventing the need to explicitly count unknown voxels when prioritizing viewpoints. Simulations show the proposed method is more computationally efficient than the existing OctoMap-based methods and achieves computational efficiency comparable to baselines that are independent of OctoMap. Specifically, the Bayesian-enhanced framework achieves up to a $54\%$ improvement in total exploration time compared to standard deterministic frontier-based baselines across varying spatial scales, while guaranteeing task completion. Real-world experiments confirm the computational bounds as well as the effectiveness of the proposed enhancement.

John Lewis Devassy, Meysam Basiri, Mário A. T. Figueiredo et al.

Multi-agent autonomous exploration is essential for applications such as environmental monitoring, search and rescue, and industrial-scale surveillance. However, effective coordination under communication constraints remains a significant challenge. Frontier exploration algorithms analyze the boundary between the known and unknown regions to determine the next-best view that maximizes exploratory gain. This article proposes an enhancement to existing frontier-based exploration algorithms by introducing a probabilistic approach to frontier prioritization. By leveraging Dirichlet process Gaussian mixture model (DP-GMM) and a probabilistic formulation of information gain, the method improves the quality of frontier prioritization. The proposed enhancement, integrated into two state-of-the-art multi-agent exploration algorithms, consistently improves performance across environments of varying clutter, communication constraints, and team sizes. Simulations showcase an average gain of $10\%$ and $14\%$ for the two algorithms across all combinations. Successful deployment in real-world experiments with a dual-drone system further corroborates these findings.

Nivand Khosravi, Rodrigo Ventura, Meysam Basiri

Non-repetitive solid-state LiDAR scanning leads to an extremely sparse measurement regime for detecting airborne UAVs: a small quadrotor at 10-25 m typically produces only 1-2 returns per scan, which is far below the point densities assumed by most existing detection approaches and inadequate for robust multi-target data association. We introduce an unsupervised, LiDAR-only pipeline that addresses both detection and tracking without the need for labeled training data. The detector integrates range-adaptive DBSCAN clustering with a three-stage temporal consistency check and is benchmarked on real-world air-to-air flight data under eight different parameter configurations. The best setup attains 0.891 precision, 0.804 recall, and 0.63 m RMSE, and a systematic minPts sweep verifies that most scans contain at most 1-2 target points, directly quantifying the sparsity regime. For multi-target tracking, we compare deterministic Hungarian assignment with joint probabilistic data association (JPDA), each coupled with Interacting Multiple Model filtering, in four simulated scenarios with increasing levels of ambiguity. JPDA cuts identity switches by 64% with negligible impact on MOTA, demonstrating that probabilistic association is advantageous when UAV trajectories approach one another closely. A two-environment evaluation strategy, combining real-world detection with RTK-GPS ground truth and simulation-based tracking with identity-annotated ground truth, overcomes the limitations of GNSS-only evaluation at inter-UAV distances below 2 m.

Niusha Khosravi, Rodrigo Ventura, Meysam Basiri

This paper presents an implementation and evaluation of a Distributed Kalman--Consensus Filter (DKCF) for Multi-Object Tracking (MOT) in mobile robot networks operating under partial observability and heterogeneous localization uncertainty. A key challenge in such systems is the fusion of information from agents with differing localization quality, where frame misalignment can lead to inconsistent estimates, track duplication, and ghost tracks. To address this issue, we build upon the MOTLEE framework and retain its frame-alignment methodology, which uses consistently tracked dynamic objects as transient landmarks to improve relative pose estimates between robots. On top of this framework, we propose an uncertainty-aware adaptive consensus weighting mechanism that dynamically adjusts the influence of neighbor information based on the covariance of the transmitted estimates, thereby reducing the impact of unreliable data during distributed fusion. Local tracking is performed using a Kalman Filter (KF) with a Constant Velocity Model (CVM) and Global Nearest Neighbor (GNN) data association. simulation results demonstrate that adaptive weighting effectively protects local estimates from inconsistent data, yielding a MOTA improvement of 0.09 for agents suffering from localization drift, although system performance remains constrained by communication latency.

Nivand Khosravi, Rodrigo Ventura, Meysam Basiri

Cooperative localization (CL) enables accurate position estimation in multi-robot systems operating in GPS-denied environments. This paper presents a comparative study of five CL approaches: Centralized Cooperative Localization (CCL), Decentralized Cooperative Localization (DCL), Sequential Cooperative Localization (StCL), Covariance Intersection (CI), and Standard Cooperative Localization (Standard-CL). All methods are implemented in ROS and evaluated through Monte Carlo simulations under two conditions: weak data association and robust detection. Our analysis reveals fundamental trade-offs among the methods. StCL and Standard-CL achieve the lowest position errors but exhibit severe filter inconsistency, making them unsuitable for safety-critical applications. DCL demonstrates remarkable stability under challenging conditions due to its measurement stride mechanism, which provides implicit regularization against outliers. CI emerges as the most balanced approach, achieving near-optimal consistency while maintaining competitive accuracy. CCL provides theoretically optimal estimation but shows sensitivity to measurement outliers. These findings offer practical guidance for selecting CL algorithms based on application requirements.

Romulo T. Rodrigues, Meysam Basiri, A. Pedro Aguiar et al.

This paper proposes a low-level visual navigation algorithm to improve visual localization of a mobile robot. The algorithm, based on artificial potential fields, associates each feature in the current image frame with an attractive or neutral potential energy, with the objective of generating a control action that drives the vehicle towards the goal, while still favoring feature rich areas within a local scope, thus improving the localization performance. One key property of the proposed method is that it does not rely on mapping, and therefore it is a lightweight solution that can be deployed on miniaturized aerial robots, in which memory and computational power are major constraints. Simulations and real experimental results using a mini quadrotor equipped with a downward looking camera demonstrate that the proposed method can effectively drive the vehicle to a designated goal through a path that prevents localization failure.

Rômulo T. Rodrigues, Meysam Basiri, A. Pedro Aguiar et al.

This paper proposes a novel solution for improving visual localization in an active fashion. The solution, based on artificial potential field, associates each feature in the current image frame with an attractive or neutral potential energy. The resultant action drives the vehicle towards the goal, while still favoring feature rich areas. Experimental results with a mini quadrotor equipped with a downward looking camera assess the performance of the proposed method.