Gang Hu

Qiulei Wang, Lei Yan, Gang Hu et al.

This study proposes a self-learning algorithm for closed-loop cylinder wake control targeting lower drag and lower lift fluctuations with the additional challenge of sparse sensor information, taking deep reinforcement learning as the starting point. DRL performance is significantly improved by lifting the sensor signals to dynamic features (DF), which predict future flow states. The resulting dynamic feature-based DRL (DF-DRL) automatically learns a feedback control in the plant without a dynamic model. Results show that the drag coefficient of the DF-DRL model is 25% less than the vanilla model based on direct sensor feedback. More importantly, using only one surface pressure sensor, DF-DRL can reduce the drag coefficient to a state-of-the-art performance of about 8% at Re = 100 and significantly mitigate lift coefficient fluctuations. Hence, DF-DRL allows the deployment of sparse sensing of the flow without degrading the control performance. This method also shows good robustness in controlling flow under higher Reynolds numbers, which reduces the drag coefficient by 32.2% and 46.55% at Re = 500 and 1000, respectively, indicating the broad applicability of the method. Since surface pressure information is more straightforward to measure in realistic scenarios than flow velocity information, this study provides a valuable reference for experimentally designing the active flow control of a circular cylinder based on wall pressure signals, which is an essential step toward further developing intelligent control in realistic multi-input multi-output (MIMO) system.

Gang Hu, Ke Qin, Chenhan Yuan et al.

While the progression of Large Language Models (LLMs) has notably propelled financial analysis, their application has largely been confined to singular language realms, leaving untapped the potential of bilingual Chinese-English capacity. To bridge this chasm, we introduce ICE-PIXIU, seamlessly amalgamating the ICE-INTENT model and ICE-FLARE benchmark for bilingual financial analysis. ICE-PIXIU uniquely integrates a spectrum of Chinese tasks, alongside translated and original English datasets, enriching the breadth and depth of bilingual financial modeling. It provides unrestricted access to diverse model variants, a substantial compilation of diverse cross-lingual and multi-modal instruction data, and an evaluation benchmark with expert annotations, comprising 10 NLP tasks, 20 bilingual specific tasks, totaling 95k datasets. Our thorough evaluation emphasizes the advantages of incorporating these bilingual datasets, especially in translation tasks and utilizing original English data, enhancing both linguistic flexibility and analytical acuity in financial contexts. Notably, ICE-INTENT distinguishes itself by showcasing significant enhancements over conventional LLMs and existing financial LLMs in bilingual milieus, underscoring the profound impact of robust bilingual data on the accuracy and efficacy of financial NLP.

Junle Liu, Chang Liu, Yanyu Ke et al.

The wall pressure is of great importance in understanding the forces and structural responses induced by fluid. Recent works have investigated the potential of deep learning techniques in predicting mean pressure coefficients and fluctuating pressure coefficients, but most of existing deep learning frameworks are limited to predicting a single snapshot using full spatial information. To forecast spatiotemporal wall pressure of flow past a rectangular cylinder, this study develops a physics-aware DeepU-Fourier neural Network (DeepUFNet) deep learning model. DeepUFNet comprises the UNet structure and the Fourier neural network, with physical high-frequency loss control embedded in the model training stage to optimize model performance, where the parameter $β$ varies with the development of the training epoch. Wind tunnel testing is performed to collect wall pressures of a two-dimensional rectangular cylinder with a side ratio of 1.5 at an angle of attack of zero using high-frequency pressure scanning, thereby constructing a database for DeepUFNet training and testing. The DeepUFNet model is found to forecast spatiotemporal wall pressure information with high accuracy. The comparison between forecast results and experimental data presents agreement in statistical information, temporal pressure variation, power spectrum density, spatial distribution, and spatiotemporal correlation. It is also found that embedding a physical high-frequency loss control coefficient $β$ in the DeepUFNet model can significantly improve model performance in forecasting spatiotemporal wall pressure information, in particular, in forecasting high-order frequency fluctuation and wall pressure variance. Furthermore, the DeepUFNet extrapolation capability is tested with sparse spatial information input, and the model presents a satisfactory extrapolation ability

Gang Hu, Ming Gu

Investment portfolios, central to finance, balance potential returns and risks. This paper introduces a hybrid approach combining Markowitz's portfolio theory with reinforcement learning, utilizing knowledge distillation for training agents. In particular, our proposed method, called KDD (Knowledge Distillation DDPG), consist of two training stages: supervised and reinforcement learning stages. The trained agents optimize portfolio assembly. A comparative analysis against standard financial models and AI frameworks, using metrics like returns, the Sharpe ratio, and nine evaluation indices, reveals our model's superiority. It notably achieves the highest yield and Sharpe ratio of 2.03, ensuring top profitability with the lowest risk in comparable return scenarios.

Gang Hu, Lingbo Liu, Dacheng Tao et al.

Interference effects of tall buildings have attracted numerous studies due to the boom of clusters of tall buildings in megacities. To fully understand the interference effects of buildings, it often requires a substantial amount of wind tunnel tests. Limited wind tunnel tests that only cover part of interference scenarios are unable to fully reveal the interference effects. This study used machine learning techniques to resolve the conflicting requirement between limited wind tunnel tests that produce unreliable results and a completed investigation of the interference effects that is costly and time-consuming. Four machine learning models including decision tree, random forest, XGBoost, generative adversarial networks (GANs), were trained based on 30% of a dataset to predict both mean and fluctuating pressure coefficients on the principal building. The GANs model exhibited the best performance in predicting these pressure coefficients. A number of GANs models were then trained based on different portions of the dataset ranging from 10% to 90%. It was found that the GANs model based on 30% of the dataset is capable of predicting both mean and fluctuating pressure coefficients under unseen interference conditions accurately. By using this GANs model, 70% of the wind tunnel test cases can be saved, largely alleviating the cost of this kind of wind tunnel testing study.

Gang Hu, K. C. S. Kwok

Numerous studies have been carried out to measure wind pressures around circular cylinders since the early 20th century due to its engineering significance. Consequently, a large amount of wind pressure data sets have accumulated, which presents an excellent opportunity for using machine learning (ML) techniques to train models to predict wind pressures around circular cylinders. Wind pressures around smooth circular cylinders are a function of mainly the Reynolds number (Re), turbulence intensity (Ti) of the incident wind, and circumferential angle of the cylinder. Considering these three parameters as the inputs, this study trained two ML models to predict mean and fluctuating pressures respectively. Three machine learning algorithms including decision tree regressor, random forest, and gradient boosting regression trees (GBRT) were tested. The GBRT models exhibited the best performance for predicting both mean and fluctuating pressures, and they are capable of making accurate predictions for Re ranging from 10^4 to 10^6 and Ti ranging from 0% to 15%. It is believed that the GBRT models provide very efficient and economical alternative to traditional wind tunnel tests and computational fluid dynamic simulations for determining wind pressures around smooth circular cylinders within the studied Re and Ti range.