Dieter Coppens

Dieter Coppens, Adnan Shahid, Eli De Poorter

Ultra-wideband technology has become increasingly popular for indoor localization and location-based services. This has led recent advances to be focused on reducing the ranging errors, whilst research focusing on enabling more reliable and energy efficient communication has been largely unexplored. The IEEE 802.15.4 UWB physical layer allows for several settings to be selected that influence the energy consumption, range, and reliability. Combined with the available link state diagnostics reported by UWB devices, there is an opportunity to dynamically select PHY settings based on the environment. To address this, we propose a deep Q-learning approach for enabling reliable UWB communication, maximizing packet reception rate (PRR) and minimizing energy consumption. Deep Q-learning is a good fit for this problem, as it is an inherently adaptive algorithm that responds to the environment. Validation in a realistic office environment showed that the algorithm outperforms traditional Q-learning, linear search and using a fixed PHY layer. We found that deep Q-learning achieves a higher average PRR and reduces the ranging error while using only 14% of the energy compared to a fixed PHY setting in a dynamic office environment.

Dieter Coppens, Adnan Shahid, Eli De Poorter

Despite their high accuracy, UWB-based localization systems suffer inaccuracies when deployed in industrial locations with many obstacles due to multipath effects and non-line-of-sight (NLOS) conditions. In such environments, current error mitigation approaches for time difference of arrival (TDoA) localization typically exclude NLOS links. However, this exclusion approach leads to geometric dilution of precision problems and this approach is infeasible when the majority of links are NLOS. To address these limitations, we propose a transformer-based TDoA position correction method that uses raw channel impulse responses (CIRs) from all available anchor nodes to compute position corrections. We introduce different CIR ordering, patching and positional encoding strategies for the transformer, and analyze each proposed technique's scalability and performance gains. Based on experiments on real-world UWB measurements, our approach can provide accuracies of up to 0.39 m in a complex environment consisting of (almost) only NLOS signals, which is an improvement of 73.6 % compared to the TDoA baseline.

Dieter Coppens, Ben Van Herbruggen, Adnan Shahid et al.

Indoor positioning using UWB technology has gained interest due to its centimeter-level accuracy potential. However, multipath effects and non-line-of-sight conditions cause ranging errors between anchors and tags. Existing approaches for mitigating these ranging errors rely on collecting large labeled datasets, making them impractical for real-world deployments. This paper proposes a novel self-supervised deep reinforcement learning approach that does not require labeled ground truth data. A reinforcement learning agent uses the channel impulse response as a state and predicts corrections to minimize the error between corrected and estimated ranges. The agent learns, self-supervised, by iteratively improving corrections that are generated by combining the predictability of trajectories with filtering and smoothening. Experiments on real-world UWB measurements demonstrate comparable performance to state-of-the-art supervised methods, overcoming data dependency and lack of generalizability limitations. This makes self-supervised deep reinforcement learning a promising solution for practical and scalable UWB-ranging error correction.