Daphna Raz

2papers

2 Papers

ROFeb 5, 2020
Reachable Sets for Safe, Real-Time Manipulator Trajectory Design

Patrick Holmes, Shreyas Kousik, Bohao Zhang et al.

For robotic arms to operate in arbitrary environments, especially near people, it is critical to certify the safety of their motion planning algorithms. However, there is often a trade-off between safety and real-time performance; one can either carefully design safe plans, or rapidly generate potentially-unsafe plans. This work presents a receding-horizon, real-time trajectory planner with safety guarantees, called ARMTD (Autonomous Reachability-based Manipulator Trajectory Design). The method first computes (offline) a reachable set of parameterized trajectories for each joint of an arm. Each trajectory includes a fail-safe maneuver (braking to a stop). At runtime, in each receding-horizon planning iteration, ARMTD constructs a parameterized reachable set of the full arm in workspace and intersects it with obstacles to generate sub-differentiable, provably-conservative collision-avoidance constraints on the trajectory parameters. ARMTD then performs trajectory optimization over the parameters, subject to these constraints. On a 6 degree-of-freedom arm, ARMTD outperforms CHOMP in simulation, never crashes, and completes a variety of real-time planning tasks on hardware.

ROOct 25, 2018
Automated Camera-Based Estimation of Rehabilitation Criteria Following ACL Reconstruction

Choong Hee Kim, Shannon M. Danforth, Patrick D. Holmes et al.

Anterior cruciate ligament (ACL) reconstruction necessitates months of rehabilitation, during which a clinician evaluates whether a patient is ready to return to sports or occupation. Due to their time- and cost-intensive nature, these screenings to assess progress are unavailable to many. This paper introduces an automated, markerless, camera-based method for estimating rehabilitation criteria following ACL reconstruction. To evaluate the performance of this novel technique, data were collected weekly from 12 subjects as they used a leg press over the course of a 12-week rehabilitation period. The proposed camera-based method for estimating displacement and force was compared to encoder and force plate measurements. The leg press displacement and force values were estimated with 89.7% and 85.3% accuracy, respectively. These values were then used to calculate lower-limb symmetry and to track patient progress over time.